HowToFixWiFiSimple fixes  •  Better connection
Wifi Guide

What Is Starlink Wifi Called? Default Network Name Explained

Introduction If you have just unboxed a Starlink kit or you are trying to connect a new device to your satellite internet, one of the first questions you will ask is What Is Starlink Wifi Called? Starlink keeps things simple, but the default network name is no

HowToFixWiFi

Introduction

If you have just unboxed a Starlink kit or you are trying to connect a new device to your satellite internet, one of the first questions you will ask is What Is Starlink Wifi Called? Starlink keeps things simple, but the default network name is not always obvious, especially if you expected something like “Starlink-XXXX” or a personalized name. In this guide, we explain exactly what the default Starlink Wi-Fi network name is, where to find it, how to change it, and how to troubleshoot common connection issues.

Whether you are using the original round dish, the rectangular dish, or the newer Gen 3 router, the basics are similar. By the end of this article, you will know how to locate your Starlink SSID, manage your password, set up a guest network, and secure your connection.

Table of Contents

What Is Starlink Wifi Called?

The short answer to What Is Starlink Wifi Called? is that the default network name, also known as the SSID, is usually STARLINK in all capital letters. When you first power on the Starlink router, it broadcasts a Wi-Fi network with that name so you can connect and complete setup through the Starlink app.

Unlike many internet providers that ship routers with names like “Netgear-5G-XXXX” or “Linksys-ABCD,” Starlink uses a single, clean, branded name. This makes it easy to identify in your device’s Wi-Fi list, but it also means that if you live near other Starlink users, you may see multiple networks named “STARLINK” at once. In that case, you will need to rely on signal strength or change your network name to something unique.

It is worth noting that Starlink does not append random numbers or letters to the default SSID. The name is simply “STARLINK.” Some users expect a more complex identifier, which is why searches like “What Is Starlink Wifi Called?” are so common.

Where to Find the Default Starlink Network Name

Even though the default name is “STARLINK,” there are a few places where you can confirm it and find your unique credentials.

On the Router Label

Every Starlink router has a physical label, usually on the bottom or back. This label lists the default Wi-Fi network name (SSID) and the default Wi-Fi password. If you have not changed anything, the SSID shown here is what your router broadcasts.

Inside the Starlink App

Once connected, open the Starlink app on your phone or tablet. Go to the settings section, then Wi-Fi. The app displays your current network name and password. If the network name still shows “STARLINK,” you are using the default.

Starlink Account Dashboard

You can also log in to your Starlink account on the web. Under your service address and equipment details, you can view and manage router settings, including the Wi-Fi name and password, as long as your router supports remote management.

The Default Starlink Wi-Fi Password

The default password is not “starlink” or “password.” It is a unique string printed on your router’s label. It is usually a mix of letters and numbers, and it is case-sensitive. Keep this label safe, because you will need it the first time you connect or after a factory reset.

If you lose the label, you can recover access through the Starlink app by performing a factory reset on the router, which restores the default name and password printed on the hardware. Alternatively, if you are already connected via Ethernet or a previously saved device, you can view the password in the app.

How to Connect to Starlink Wi-Fi for the First Time

Connecting for the first time is straightforward. Follow these steps:

  1. Power on the Starlink dish and router. Wait for the system to boot. The status light on the router will indicate when it is ready.
  2. On your phone, tablet, or computer, open the Wi-Fi settings and look for a network named STARLINK.
  3. Select it and enter the default password from the router label.
  4. Open the Starlink app. It should detect the connection automatically and guide you through alignment, setup, and account linking.
  5. Once setup is complete, you can rename the network and change the password if desired.

If your device does not see the network right away, wait a few minutes. The router may still be booting, or the dish may be searching for satellites.

How to Change Your Starlink Wi-Fi Name and Password

After initial setup, most users want a custom name. Here is how to change it using the Starlink app:

  1. Open the Starlink app and make sure you are connected to your Starlink network.
  2. Tap the settings icon, then select Router or Wi-Fi.
  3. Tap the current network name field and enter your new SSID.
  4. Enter a new password. Use at least 12 characters with a mix of letters, numbers, and symbols.
  5. Save the changes. The router will briefly restart, and all devices will need to reconnect using the new credentials.

You can also change these settings from the web dashboard if your router supports it. After changing, update the saved network on all your devices to avoid connection errors.

Starlink Router Models and Default Naming

Starlink has shipped several router versions, and the default naming behavior is consistent across most of them. The standard SSID remains “STARLINK” unless you customize it. However, hardware differences affect features like mesh support, Ethernet ports, and Wi-Fi standards.

  • Gen 1 Router: Included with the original round dish. Basic Wi-Fi, limited advanced features.
  • Gen 2 Router: Shipped with the rectangular dish. Improved performance and app integration.
  • Gen 3 Router: The newest model with better Wi-Fi coverage, mesh support, and modern standards.
  • Starlink Mini: Portable unit with built-in router, ideal for travel and RV use.

Regardless of model, the answer to What Is Starlink Wifi Called? at first boot is still “STARLINK.” Customization happens in the app after setup.

Router Comparison Table

Router Model Default SSID Wi-Fi Standard Mesh Support Ethernet Ports
Gen 1 Router STARLINK Wi-Fi 5 No 1
Gen 2 Router STARLINK Wi-Fi 5 Limited 1 (with adapter)
Gen 3 Router STARLINK Wi-Fi 6 Yes 2
Starlink Mini STARLINK Wi-Fi 5/6 Limited 1

Troubleshooting: Cannot Find the Starlink Network

Sometimes the “STARLINK” network does not appear in your Wi-Fi list. Here are the most common causes and fixes.

Router Not Powered or Booting

Ensure the router is plugged in and the dish is connected. The router may take several minutes to boot. Watch the status LED for solid white or green, which indicates readiness.

Network Was Already Renamed

If someone previously set up the kit, the SSID may no longer be “STARLINK.” Check the router label for the default, or look for a custom name in your saved networks. You can reset the router to factory defaults to restore “STARLINK.”

Device Wi-Fi Issues

Toggle Wi-Fi off and on, restart your device, or “forget” old Starlink networks and rescan. Interference from other electronics can also hide the signal.

Performing a Factory Reset

If all else fails, reset the router. The method varies by model but generally involves holding the reset button or power-cycling in a specific pattern. After reset, the SSID returns to “STARLINK” and the password returns to the label value.

Setting Up a Starlink Guest Network

Starlink routers support a guest network, which is useful for visitors. You can enable it in the app under Wi-Fi settings. The guest network gets its own name and password, separate from your main network. This keeps your primary devices and files safer while still sharing internet access.

Give the guest network a clear name like “Starlink-Guest” and a strong password. You can disable it when not needed.

Starlink Mesh Nodes and Network Names

If you use Starlink mesh nodes to extend coverage, they broadcast the same SSID as your main router. Devices roam between nodes automatically. You do not need separate names for each node. If you rename the main network, the mesh nodes follow.

Placement matters. Put nodes within range of the main router and avoid thick walls or metal obstacles. The Starlink app includes a mesh placement tool to help.

Tips and Best Practices

  • Change the default password immediately after setup. Default credentials are a security risk.
  • Choose a unique SSID that does not include personal information like your address or full name.
  • Use WPA2 or WPA3 encryption, which Starlink enables by default.
  • Keep the router firmware updated via the Starlink app.
  • Place the router centrally for even coverage.
  • Write down your new credentials and store them securely.
  • If you have multiple Starlink kits, give each a distinct name to avoid confusion.

Security Best Practices

Because the default name “STARLINK” is public knowledge, leaving it unchanged makes your network easier to identify. Combine a custom SSID with a strong password and regular updates. Disable WPS if available, and consider using the guest network for visitors. Review connected devices in the app periodically and remove any you do not recognize.

For advanced users, you can place the Starlink router behind your own firewall or use Ethernet to connect a third-party router, giving you more control over security and naming.

Frequently Asked Questions

What Is Starlink Wifi Called by default?

By default, Starlink Wi-Fi is called STARLINK. This is the SSID broadcast when the router is first powered on or after a factory reset.

Can I change the Starlink Wi-Fi name?

Yes. Use the Starlink app to rename your network to anything you prefer, as long as it follows length and character rules.

Is the default Starlink password the same for everyone?

No. The default password is unique to each router and printed on its label. It is not a universal password.

Why do I see multiple STARLINK networks?

If neighbors also use Starlink and have not renamed their networks, you will see duplicates. Rename yours to stand out and avoid connecting to the wrong one.

Does Starlink support 5 GHz and 2.4 GHz under one name?

Yes. Starlink routers typically use a single SSID for both bands, letting devices choose the best connection automatically.

What happens to my Wi-Fi name after a firmware update?

Firmware updates do not reset your custom name or password. They persist unless you factory reset the router.

Conclusion

To summarize, the answer to What Is Starlink Wifi Called? is simple: the default network name is “STARLINK.” You can find it on the router label, in the Starlink app, or on your account dashboard. From there, you can connect, customize the name and password, set up guest access, and extend coverage with mesh nodes. Taking a few minutes to secure and personalize your Starlink Wi-Fi ensures a faster, safer, and more reliable experience for every device in your home.