HowToFixWiFiSimple fixes  •  Better connection
Wifi Guide

How to Update My Ring Wifi? Change Your Doorbell Network Easily

Introduction Changing your internet service provider, upgrading to a new router, or simply renaming your home network can leave your smart devices offline—including your Ring doorbell or security camera. If you’ve found yourself wondering, “How to Update My Ri

HowToFixWiFi

Introduction

Changing your internet service provider, upgrading to a new router, or simply renaming your home network can leave your smart devices offline—including your Ring doorbell or security camera. If you’ve found yourself wondering, “How to Update My Ring Wifi?” you’re not alone. Keeping your Ring device connected to the right network is essential for real-time alerts, live video streaming, and reliable motion detection.

The good news is that updating your Ring Wi-Fi settings is a straightforward process you can complete in just a few minutes using the Ring app. This guide walks you through every step, from preparing your device to troubleshooting common connection issues. Whether you have a Ring Video Doorbell, a security camera, or a Ring Chime, you’ll find clear instructions to get your device back online quickly and securely.

Table of Contents

Why You Might Need to Change Your Ring Wi-Fi Network

There are several common situations that require you to update the Wi-Fi network on your Ring device. Understanding why a change is needed can help you prepare and avoid unnecessary frustration.

  • New router or modem: Upgrading your internet equipment often means setting up a new network name (SSID) and password.
  • Changed Wi-Fi password: If you’ve updated your network password for security reasons, your Ring device will lose its connection until you update the credentials.
  • Switching internet providers: A new provider typically comes with a new router and network settings.
  • Moving to a new home: Your Ring device will need to connect to the Wi-Fi network at your new location.
  • Network renaming: Even if your password stays the same, changing your network name will disconnect your Ring device.
  • Improving signal strength: You may want to switch your device to a different band or a closer access point for better performance.

In all of these cases, knowing how to update my Ring Wifi? ensures your home security system stays active without interruption.

Before You Begin: What You’ll Need

Before you start the process, gather a few things to make the update as smooth as possible:

  • Your smartphone or tablet: Make sure the Ring app is installed and you’re signed in to your account.
  • Your new Wi-Fi network name and password: Double-check the password for accuracy, as it is case-sensitive.
  • Physical access to your Ring device: You may need to press a setup button on the device, so have a ladder or step stool ready if it’s mounted high.
  • A charged battery (for battery-powered devices): If your Ring doorbell or camera runs on battery, ensure it has enough charge to complete the setup process.
  • A stable internet connection: Your phone should be connected to the internet so the Ring app can communicate with Ring’s servers during setup.

Taking a moment to prepare these items can save time and prevent interruptions during the network update.

How to Update My Ring Wifi? Step-by-Step Instructions

The Ring app makes it easy to change your device’s Wi-Fi network without removing the device from your account or losing your settings. Follow these steps to reconnect your Ring device to a new network.

Step 1: Open the Ring App and Select Your Device

Launch the Ring app on your smartphone or tablet. From the dashboard, tap the menu icon (three horizontal lines) or locate the specific device you want to update. Tap on the device to open its settings and control panel.

Step 2: Access Device Health and Network Settings

Once you’re on the device’s main screen, tap Device Health. This section displays information about your device’s battery level, signal strength, and current network status. Look for the option labeled Change Wi-Fi Network or Reconnect to Wi-Fi and tap it.

If your device is already offline, the app may prompt you to reconnect automatically. Follow the on-screen instructions to proceed.

Step 3: Put Your Ring Device into Setup Mode

The app will guide you to put your Ring device into setup mode. The exact method depends on your device model:

  • Ring Video Doorbell: Press and release the orange setup button on the back of the device. For some models, you may need to remove the faceplate to access the button.
  • Ring Security Camera: Press and hold the setup button (usually located on the top or back of the device) until the light begins to spin or flash.
  • Ring Chime: Press and hold the setup button on the side of the device for about five seconds until the light flashes.

Once the device enters setup mode, you’ll typically see a spinning or flashing light indicating it’s ready to connect.

Step 4: Connect to Your New Wi-Fi Network

After your device is in setup mode, the Ring app will scan for available Wi-Fi networks. Select your new network from the list and enter the correct password. Take care to type the password exactly as it appears, paying attention to uppercase and lowercase letters, numbers, and special characters.

If your router broadcasts both 2.4 GHz and 5 GHz bands under the same name, the app will typically connect your Ring device to the most compatible band. Some Ring models only support 2.4 GHz, so keep this in mind when selecting your network.

Step 5: Confirm the Connection

The app will attempt to connect your Ring device to the new network. This process may take a minute or two. Once the connection is successful, you’ll see a confirmation message in the app. Your device’s status should update to show it’s online, and you can test it by triggering a live view or checking the signal strength in Device Health.

If the connection fails, don’t worry—refer to the troubleshooting section below for solutions to common issues.

How to Update Wi-Fi on Different Ring Devices

While the general process is similar across all Ring products, there are small differences depending on the type of device you own. Here’s what to know for each category.

Ring Video Doorbells

Most Ring Video Doorbells have a setup button located on the back of the device. If your doorbell is hardwired, you don’t need to disconnect it to change the Wi-Fi settings. For battery-powered models, you may need to remove the device from its mounting bracket to access the setup button. After updating the network, your doorbell will retain all of its previous settings, including motion zones, alert preferences, and linked devices.

Ring Security Cameras

Ring cameras, including indoor, outdoor, and floodlight models, follow a similar process. The setup button is usually found on the top or back of the camera. For floodlight cameras, the button may be located under the camera unit. Make sure the camera has power—either through a wired connection or a charged battery—before starting the setup process.

Ring Chime and Chime Pro

The Ring Chime and Chime Pro plug directly into a wall outlet. To update the Wi-Fi on these devices, press and hold the setup button on the side until the indicator light flashes. The Chime Pro also acts as a Wi-Fi extender for other Ring devices, so reconnecting it to your new network is especially important if you rely on it to boost signal strength to your doorbell or cameras.

Wi-Fi Requirements and Compatibility for Ring Devices

Not all Wi-Fi networks are created equal, and Ring devices have specific requirements for optimal performance. Understanding these requirements can help you choose the right network settings and avoid connectivity problems.

Feature Requirement / Recommendation Notes
Frequency Band 2.4 GHz (required for most models); 5 GHz (supported on select newer models) 2.4 GHz offers better range; 5 GHz offers faster speeds but shorter range
Minimum Upload Speed 2 Mbps per device Higher speeds improve video quality and reduce buffering
Recommended Upload Speed 5 Mbps or higher per device Ideal for multiple Ring devices or HD video streaming
Security Protocol WPA2 or WPA3 WEP and open networks are not supported for security reasons
Network Type Standard home Wi-Fi network Guest networks, captive portals, and enterprise networks may cause issues
Signal Strength (RSSI) -60 dBm or better Values closer to 0 indicate a stronger signal; below -70 dBm may cause problems

If your Ring device struggles to maintain a stable connection, checking these requirements against your current network setup is a good first step.

Troubleshooting Common Wi-Fi Update Issues

Even with careful preparation, you may run into issues when trying to update your Ring device’s Wi-Fi settings. Here are solutions to the most common problems.

Ring Device Won’t Enter Setup Mode

If pressing the setup button doesn’t trigger setup mode, try the following:

  • Check the battery: A low battery can prevent the device from entering setup mode. Charge or replace the battery and try again.
  • Hold the button longer: Some models require you to hold the setup button for 15 to 20 seconds to initiate a full reset into setup mode.
  • Restart the device: For hardwired devices, briefly disconnect the power and reconnect it before attempting setup mode again.
  • Verify the button location: Consult your device’s manual or the Ring app for the exact location of the setup button, as it varies by model.

Wi-Fi Network Not Appearing in the App

If your new network doesn’t show up in the list of available networks, consider these fixes:

  • Move closer to the router: During setup, your phone and Ring device should be within range of the new Wi-Fi network.
  • Check that the network is broadcasting: If your router has SSID broadcast disabled, temporarily enable it during setup.
  • Confirm the frequency band: If your device only supports 2.4 GHz, make sure the 2.4 GHz band is enabled on your router.
  • Restart your router: A quick reboot can resolve temporary issues that prevent the network from appearing.

Connection Fails After Entering the Password

A failed connection after entering your password is often caused by one of these issues:

  • Incorrect password: Re-enter the password carefully. Remember that Wi-Fi passwords are case-sensitive.
  • Special characters: Some devices have trouble with certain special characters in Wi-Fi passwords. If your password contains unusual symbols, consider temporarily changing it to test the connection.
  • Network congestion: Too many devices on the same network can interfere with setup. Try disconnecting a few devices temporarily.
  • Router security settings: MAC address filtering or firewall settings on your router may block the Ring device. Check your router’s settings to ensure the device is allowed to connect.

Tips and Best Practices for a Strong Ring Wi-Fi Connection

Once you’ve successfully updated your Ring device’s Wi-Fi network, a few best practices can help you maintain a reliable connection over time:

  • Position your router centrally: Place your router in a central location to provide even coverage throughout your home.
  • Minimize interference: Keep your router away from thick walls, metal objects, microwaves, and other electronics that can interfere with the Wi-Fi signal.
  • Use a dedicated network name for 2.4 GHz: If your router supports both bands, giving them separate names can help you ensure your Ring device connects to the most reliable band.
  • Keep firmware updated: Regularly update your router’s firmware and keep the Ring app up to date to benefit from performance improvements and security patches.
  • Monitor signal strength: Check the Device Health section in the Ring app periodically to monitor your RSSI (Received Signal Strength Indicator). If the signal weakens, consider repositioning your router or adding an extender.
  • Limit bandwidth-heavy activities: If multiple devices are streaming or downloading large files simultaneously, your Ring device’s video quality may suffer. Quality of Service (QoS) settings on your router can help prioritize Ring traffic.

How to Optimize Your Home Network for Ring Devices

Optimizing your home network goes beyond simply connecting your Ring device. A well-configured network ensures consistent performance, faster alerts, and smoother live video.

Start by running a speed test near the location of your Ring device. Compare the results to Ring’s recommended upload speeds. If speeds fall short, contact your internet provider to discuss upgrade options or troubleshoot your connection.

Next, review your router’s settings. Enabling QoS can prioritize video traffic from your Ring devices, reducing lag during peak usage times. If your router supports it, assigning a static IP address to your Ring device can also improve connection stability.

Finally, consider the total number of devices on your network. Smart homes often have dozens of connected devices competing for bandwidth. Upgrading to a router designed for high device counts can make a noticeable difference in reliability.

When to Consider a Wi-Fi Extender or Mesh System

If your Ring device is located far from your router—such as a front door at the edge of your home’s Wi-Fi range—a Wi-Fi extender or mesh system can help bridge the gap.

A Wi-Fi extender rebroadcasts your existing signal to reach farther areas. The Ring Chime Pro, for example, doubles as an extender specifically designed for Ring devices. This is a convenient option if you only need to boost the signal to one or two devices.

A mesh Wi-Fi system uses multiple access points placed throughout your home to create a seamless, unified network. Mesh systems are ideal for larger homes or properties with dead zones. They automatically route your devices to the strongest access point, which can significantly improve the performance of Ring doorbells and cameras installed outdoors or on different floors.

Before investing in new hardware, try repositioning your existing router and eliminating sources of interference. In many cases, small adjustments can resolve signal issues without additional equipment.

Frequently Asked Questions

Do I need to remove my Ring device from the app to change the Wi-Fi?

No. You can change the Wi-Fi network directly through the Device Health section in the Ring app. Your device settings, video history (if you have a subscription), and preferences will remain intact.

Will I lose my recordings when I update my Ring Wi-Fi?

No. Changing your Wi-Fi network does not delete your recorded videos or event history. However, your device will not record new events while it is offline, so it’s best to update the network as soon as possible.

Can I update my Ring Wi-Fi without being near the device?

You need to be physically near the device to press the setup button and put it into setup mode. However, once setup mode is active, you can complete the rest of the process through the Ring app on your phone.

Why does my Ring device keep disconnecting from Wi-Fi?

Frequent disconnections can be caused by a weak signal, network interference, router issues, or outdated firmware. Check the signal strength in Device Health, move your router closer if possible, and ensure both your router and Ring app are up to date.

Does Ring work with 5 GHz Wi-Fi?

Some newer Ring devices support 5 GHz networks, but many models only work with 2.4 GHz. Check your device’s specifications in the Ring app or product documentation to confirm which bands are supported.

How long does it take to update the Wi-Fi on a Ring device?

The process typically takes between two and five minutes. Most of that time is spent waiting for the device to enter setup mode and connect to the new network.

What should I do if I forgot my new Wi-Fi password?

You can usually find your Wi-Fi password on a label on your router, in your router’s admin settings, or by contacting your internet service provider. Make sure you have the correct password before starting the update process.

Conclusion

Learning how to update my Ring Wifi? is a simple but essential skill for any Ring device owner. Whether you’ve changed your router, updated your password, or moved to a new home, the Ring app provides a clear, guided process to get your doorbell or camera back online in minutes. By preparing in advance, following the step-by-step instructions, and applying a few network optimization tips, you can ensure your Ring device stays connected and your home remains protected.

If you encounter issues along the way, the troubleshooting steps and best practices in this guide should help you resolve the most common problems. And if your device is consistently struggling with signal strength, consider investing in a Wi-Fi extender or mesh system to create a more reliable connection. With the right setup, your Ring device will continue to deliver the security and peace of mind you depend on.