HowToFixWiFiSimple fixes  •  Better connection
Setup and Configuration

How to Setup Canon Ts3722 Printer to Wifi? TS3722 Network Setup

Introduction Setting up a wireless printer for the first time can feel confusing, especially if you are not sure where to start or which method works best for your home network. The Canon PIXMA TS3722 is a compact, affordable inkjet printer that is designed to

HowToFixWiFi

Introduction

Setting up a wireless printer for the first time can feel confusing, especially if you are not sure where to start or which method works best for your home network. The Canon PIXMA TS3722 is a compact, affordable inkjet printer that is designed to connect to a wireless network with ease once you know the correct steps. Learning How to Setup Canon Ts3722 Printer to Wifi? is important if you want to print from your Windows PC, Mac, smartphone, or tablet without the hassle of a USB cable.

This guide is built to walk you through every working method, from the standard setup using the Canon software to mobile printing, troubleshooting, and long term network tips. Whether you are connecting for the first time, moving to a new router, or reconnecting after a network change, the steps below are written for both beginners and those with a little technical experience. By the end of this article, you will have a stable wireless connection and know how to fix most common issues on your own.

Table of Contents

Before You Begin The Setup

Taking a few minutes to prepare will save you from unnecessary errors while learning How to Setup Canon Ts3722 Printer to Wifi?. The TS3722 is designed for home networks, so having the right items ready is the easiest way to get through the process without restarting from scratch.

Items You Will Need

  • Your Canon PIXMA TS3722 printer: Unbox it completely and remove any packing tape from the outside and inside access areas.
  • Ink cartridges: Have the correct cartridges installed before starting network setup. Some wireless prompts will not complete until ink is ready.
  • Power source: Plug the printer directly into a wall outlet instead of a power strip for the most stable startup.
  • Wireless network details: Know your WiFi network name (SSID) and password exactly as they appear, paying attention to uppercase, lowercase, and symbols.
  • A device for setup: A Windows PC, Mac, Android phone, or iPhone/iPad connected to the same WiFi network you want the printer to join.
  • Stable internet/router: Have access to your home router within a reasonable range of the printer for the initial connection.

Quick Prep Steps

  1. Place the TS3722 close to your WiFi router for the first setup. You can move it farther away after a successful connection.
  2. Turn on your router and let it fully boot if you recently restarted it.
  3. Load plain paper into the rear tray or front tray depending on your current configuration.
  4. Power on the printer by pressing the power button and wait until it is idle with no error lights flashing.
  5. Make sure the device you plan to use for setup is already connected to your 2.4GHz network. The TS3722 works best with most home 2.4GHz networks and has limited compatibility in mixed band confusion scenarios.

Check Network Requirements For The TS3722

Not every network setup behaves the same way. Before moving forward, it is worth checking a few requirements to avoid connection timeouts. For most households, the Canon TS3722 is built to work with standard wireless networks, but small router settings can block discovery.

  • Frequency band: Most users will connect over 2.4GHz. If your router uses a single combined name for 2.4GHz and 5GHz, temporarily separating them or moving the setup device to the 2.4GHz band often helps during discovery.
  • Security type: WPA2-PSK (AES) is the most compatible. Very old WEP networks are not recommended for modern printing apps.
  • SSID visibility: Keep your network name visible during setup. Hidden SSIDs can be used later, but discovery is easier with visibility on.
  • Router isolation/AP isolation: If this setting is enabled on your router, devices on the same network cannot talk to each other. Turn this off for printer setup and use.
  • MAC filtering: If enabled, either disable it temporarily or allow the TS3722’s MAC address once it is detected.

Keeping these in mind will make the process for How to Setup Canon Ts3722 Printer to Wifi? much smoother with fewer retries.

Method 1: Standard Setup Using Canon’s Official Setup Software

This is the most reliable all-in-one method for connecting the TS3722 to WiFi and installing the full set of drivers and utilities for your computer. It works well for Windows and macOS users who want the complete setup package.

Step 1: Download The Setup Installer

  1. On the computer you want to print from, open your web browser.
  2. Go to the official Canon support/setup page for the PIXMA TS3722 and download the latest setup installer for your operating system.
  3. Save the file to an easy to find location, such as your Downloads folder.

Step 2: Run The Installer And Start Wireless Setup

  1. Run the downloaded installer by double clicking it. Allow any permission prompts that appear.
  2. Accept the license terms when prompted.
  3. Select the region/country if asked.
  4. Choose Wireless LAN Connection or Network Connection when asked for the connection method.
  5. The installer will begin searching for available Canon printers near your computer.

Step 3: Connect The Printer To Your WiFi

  1. Make sure the TS3722 is powered on and within range of your router.
  2. When your printer appears in the list, select it. If it does not appear, the installer will walk you through putting the printer into a network connection mode.
  3. Select your WiFi network name (SSID) from the list shown.
  4. Enter your WiFi password carefully and confirm.
  5. Wait for the connection test. The printer and computer will exchange information and complete the network registration.

Step 4: Finish Driver Installation

  1. Allow the installer to add the printer to your system and install required software.
  2. Run a test print when prompted to confirm a successful connection.
  3. Close the installer once complete.

Tip: Keep both your computer and printer on the same network throughout this entire process. Switching to mobile data or a different WiFi band mid-installation is one of the most common causes of failure.

Method 2: Connect Using The Canon PRINT Inkjet/SELPHY App

If you would rather use your phone or tablet to handle How to Setup Canon Ts3722 Printer to Wifi?, the Canon PRINT Inkjet/SELPHY app is a great option. This method is ideal for mobile-first users or for adding the printer without using a full desktop installer.

Step 1: Prepare The App

  1. Connect your smartphone or tablet to the WiFi network you want the TS3722 to use.
  2. Download and install Canon PRINT Inkjet/SELPHY from your device’s app store.
  3. Open the app and grant any requested local network permissions when prompted.

Step 2: Add The Printer

  1. In the app, look for Add Printer or the + option on the home screen.
  2. The app will scan for nearby Canon printers that are in setup mode or already powered on.
  3. Power on your TS3722 and wait for it to become discoverable.
  4. Select Canon TS3722 from the list if it appears.

Step 3: Complete Wireless Connection

  1. If the printer is not yet connected, the app will guide you to connect it to WiFi.
  2. Select your network and enter the password when asked.
  3. Follow on-screen prompts until the app confirms the printer is registered to the network.
  4. You can now use the app to print, scan (where supported), check ink levels, or run basic maintenance.

This app-based route is very convenient and is often the quickest way for mobile users to get connected with minimal steps.

Method 3: Manual WiFi Setup From A Computer

In some cases, the automatic discovery might fail due to network layout or temporary wireless interference. A more manual approach can help. The goal with this method is to use your computer’s printer discovery to connect the TS3722 by guiding it through the network selection via the setup flow.

When To Use This Method

  • The installer cannot find the printer after multiple scans.
  • Your router uses advanced settings and automatic broadcast detection is slow.
  • You are setting up on a slightly restricted home network.

Steps

  1. Reset awareness: Power off the TS3722, wait for 10 to 15 seconds, and power it back on.
  2. Prepare the computer: Connect your PC or Mac to the exact WiFi network you want the printer to join.
  3. Launch setup: Run the Canon setup software and choose wireless connection.
  4. Force detection: If the automatic search times out, use the option for Set up using a USB cable temporarily only if shown as a fallback, or follow the on-screen instructions to put the printer into a connectable state.
  5. Select network manually: From the list, choose your SSID and enter your password exactly.
  6. Complete and test: Finish the wizard and print a test page to verify.

While less common, this fallback is useful to know when tackling How to Setup Canon Ts3722 Printer to Wifi? in trickier network environments.

Method 4: Connecting To A New Router Or Changing WiFi

Moving homes, upgrading your router, or changing your WiFi name/password means your TS3722 will lose its old connection. You cannot just change it from the printer panel alone in most cases, so you need to run a network reset and reconnect from scratch.

Step 1: Prepare For Reconnection

  1. Have your new WiFi name and password ready.
  2. Connect your setup device to the new network.
  3. Power on the TS3722 near your new router.

Step 2: Reset Network Settings On The TS3722

  1. With the printer powered on, locate the controls on the top panel.
  2. Access the network-related options or use the button sequence for network settings as shown in the current on-screen prompts for your unit.
  3. Choose the option to clear or reset the LAN/network settings. This will remove the old wireless profile.
  4. Wait until the printer returns to an idle state. It may briefly show network related indicators as it clears previous data.

Step 3: Reconnect Using Any Preferred Method

  1. Use Method 1 (installer), Method 2 (Canon PRINT app), or Method 3 to reconnect to the new WiFi.
  2. Select the new SSID and enter the new password.
  3. Confirm connection and run a test print.
  4. If you had the printer shared on other devices, you may need to add it again on those devices as well.

Note: After a router change, devices that were previously printing may show “offline”. Removing and re-adding the printer on those systems is the cleanest fix.

How To Add The TS3722 To Windows And macOS

Even after a successful WiFi connection, some computers will not list the printer automatically. Adding it manually ensures it is properly registered and set as the default when needed.

Adding To Windows (Windows 10 & Windows 11)

  1. Open Settings and go to Bluetooth & devices > Printers & scanners.
  2. Click Add a printer or scanner.
  3. Windows will search for available printers on the network. Wait for Canon TS3722 to appear.
  4. Select it and follow the prompts to complete installation.
  5. To test, print a page or use Manage > Print a test page.

Adding To macOS

  1. Open System Settings (or System Preferences on older versions) and go to Printers & Scanners.
  2. Click the + button at the bottom of the printer list.
  3. Select the Default tab and wait for your network to be scanned.
  4. Choose Canon TS3722 from the list. macOS will usually select the correct driver automatically.
  5. Click Add and run a quick test print.

If the printer appears but shows as “offline”, confirm both devices are on the same WiFi network and that the printer is powered on and idle.

Printing From Mobile Devices (Android And iOS)

Once the network setup is done, printing from mobile is straightforward. Depending on your device, you can use the Canon app or built in printing features.

Using The Canon PRINT Inkjet/SELPHY App (Recommended)

  1. Ensure your phone/tablet is on the same WiFi as the TS3722.
  2. Open the app and select your TS3722 if not already selected.
  3. Choose the document, photo, or web content you want to print.
  4. Adjust paper size, copies, or layout as needed.
  5. Tap Print to send the job.

Using Android’s Default Print Service

  1. Open the item you want to print (document, photo, email, or webpage).
  2. Tap the menu and select Print.
  3. Under printer selection, choose Canon TS3722 from the available network printers.
  4. Adjust settings and tap the print icon.

Using AirPrint On iOS/iPadOS

  1. Connect your iPhone or iPad to the same WiFi network as the TS3722.
  2. Open the photo, file, or webpage you want to print.
  3. Tap Share > Print.
  4. Tap Select Printer and choose Canon TS3722 if it appears.
  5. Set copies/options and tap Print.

All of these work once the core connection from How to Setup Canon Ts3722 Printer to Wifi? is complete.

Comparing Setup Methods To Pick The Right One

With multiple options available, choosing the right path depends on your device and situation. Use this comparison to decide quickly.

Method Best For Devices Pros Possible Drawbacks
Method 1: Canon Setup Software First time full installation Windows, macOS Most complete, installs drivers and utilities, reliable for new setups Needs a computer and downloading the installer
Method 2: Canon PRINT App Mobile setup with no desktop needed Android, iOS Fast, easy, great for managing printer from phone Some advanced settings easier on desktop
Method 3: Manual PC Setup Auto-discovery fails Windows, macOS Works around discovery issues, uses existing installer flow Less direct, may require more attention to prompts
Method 4: Router Change New network/moved location Any setup device Correct way to fully replace old network profile Requires network reset and reconnecting on all devices

Network Optimization Tips For Better Printing

A strong connection does more than just complete setup. These tips will help keep your TS3722 stable for everyday use after learning How to Setup Canon Ts3722 Printer to Wifi?.

  • Keep it close initially: For the first connection, place within 10 to 15 feet of the router with minimal walls in between.
  • Prefer 2.4GHz when far or through walls: 5GHz is faster but has shorter range. For most home printing, 2.4GHz is more reliable across rooms.
  • Avoid printer far from router: If you must place it in another room, consider router placement or a simple WiFi extender designed for home use.
  • Use the same network for all devices: Printing across guest networks often fails as guest networks block device to device communication.
  • Restart periodically: If you notice rare drops, restarting your router and printer once every couple of weeks can clear minor wireless glitches.
  • Limit heavy congestion: Large downloads on many devices at the same time can slow network discovery, though printing usually recovers once free.
  • Update setup tools: Keep the Canon PRINT app and your printer’s installed software reasonably up to date when prompted.

Troubleshooting Common Issues

Even with careful steps, small issues can pop up. Work through the list below in order for the fastest results.

1. Printer Not Found During Setup

  • Check proximity: Move printer and setup device closer to the router.
  • Confirm same network: Verify the setup device is on the WiFi you want the printer to join.
  • Restart devices: Power off router for 30 seconds, turn back on. Power off TS3722 for 30 seconds, turn back on.
  • Disable isolation: Check router settings for AP/Client isolation and disable if active.
  • Try the app: Switch from desktop installer to Canon PRINT app as an alternative discovery method.

2. Wrong Password Or Connection Timeout

  • Recheck password: Type slowly, check for spaces or case sensitivity.
  • Use 2.4GHz band: Connect setup device to 2.4GHz if router is band combined.
  • Forget and retry: On your phone, forget the network and reconnect before retrying app setup.
  • Reset network on printer: Clear old settings and run setup again from scratch.

3. Printer Shows Offline On Computer

  • Confirm powered on: Make sure the TS3722 is on and not showing any major error.
  • Same network check: Printer and PC must be on the same wireless network.
  • Resume/Use printer: On Windows, open Printers & Scanners > TS3722 > Open queue and ensure “Use Printer Offline” is unchecked.
  • Remove and re-add: Remove the printer from the list and add it again using the default/network discovery.
  • Restart print spooler: If using Windows, restarting the print spooler can clear stuck jobs.

4. Mobile Printing Not Working

  • Same WiFi: Switch mobile data off and confirm WiFi is active on the same network.
  • Use the app: Try Canon PRINT app if AirPrint or default print service fails.
  • Re-discover: Close and reopen the printing menu or app.
  • Router guest block: Ensure you are not on a guest network that blocks local devices.

5. Slow Discovery Or Intermittent Drops

  • Reduce distance: Move router or printer to a more central location.
  • Change channel lightly: If advanced, try a less crowded 2.4GHz channel on your router (only if comfortable).
  • Power cycle: Full power cycle of router and printer often restores stable discovery.
  • Wired test idea: If possible, test proximity by placing right next to router for a short verification.

Long Term Maintenance Checklist

After successfully completing How to Setup Canon Ts3722 Printer to Wifi?, a little upkeep will keep things running well for years. Use this simple checklist as a reminder.

Task Frequency Purpose
Check network connection Monthly Confirm printer is online and responds to print jobs from all devices.
Run a test print Monthly Catch connectivity or nozzle issues early before an urgent print.
Update apps/tools Every 1-2 months Keep Canon PRINT app and your OS updated for better compatibility.
Clean power/router cycle Quarterly Clear minor wireless buildup and refresh network sessions.
Review router settings After any router update/change Ensure AP isolation, MAC filtering, or band steering haven’t re-enabled by default.
Keep paper/ink ready Ongoing Prevents workflow delays and helps avoid repeated error states.

Frequently Asked Questions

Q1: Can I setup the Canon TS3722 to WiFi without a computer?

A: Yes. Using the Canon PRINT Inkjet/SELPHY app on an Android or iOS device is fully capable of connecting the TS3722 to your wireless network without needing a Windows or Mac computer.

Q2: Does the TS3722 support 5GHz WiFi?

A: The TS3722 is primarily designed for 2.4GHz networks. Many routers with combined band names can work if the setup device stays on the 2.4GHz side, but for the smoothest experience during setup, use a 2.4GHz network directly.

Q3: What if my printer was previously connected and I changed my WiFi password?

A: You will need to reset the network settings on the printer and run the setup again with your new network name and password. Old saved profiles will not update automatically.

Q4: Why does my printer disappear after a router restart?

A: This is usually due to IP assignment changes. Ensure both devices reconnect to the same network. If it stays missing, remove and re-add the printer on your computer or use the app to rediscover it.

Q5: Is it okay to use a WiFi extender for the TS3722?

A: Yes, in many cases. For best results, use a extender that shares the same network name and password, or one that creates a seamless network. Some cheap extenders create isolated networks which can block device discovery.

Q6: Can multiple devices print to the TS3722 at the same time?

A: Multiple devices can send print jobs to the same printer on the same network, but only one job prints at a time. Jobs will queue up and print in order.

Q7: Do I need to keep the setup app after installation?

A: No, it is not required for basic printing once installed on your computer. The app is very useful for mobile printing, ink level checks, and quick re-setup later.

Q8: What should I do if I get stuck on “Connecting to the network” for a long time?

A: Stop the process, power cycle everything, move closer to the router, and switch to the Canon PRINT app. Also confirm your password and that AP isolation is disabled.

Conclusion

Getting your printer online does not have to be a frustrating task. With the right preparation and method, How to Setup Canon Ts3722 Printer to Wifi? can be done in just a few minutes from either a computer or a mobile device. The key is to keep both devices on the same network, use the correct setup path for your situation, and fall back to a network reset when moving to a new router.

Start with the method that fits you best: the full installer for a complete desktop setup, or the Canon PRINT app for a quick mobile connection. If you run into any roadblocks, the troubleshooting section above is built to guide you step by step until your TS3722 is back online. Once connected, you can print freely from all of your devices with a stable, reliable wireless setup.