Wifi Guide

How to Reset Wifi Brother Printer? Reconnect Your Printer Fast

Introduction If your Brother printer keeps dropping offline, shows a wireless connection error, or refuses to join a new router, you may need to learn How to Reset Wifi Brother Printer? Resetting the wireless settings clears old network information and gives t

HowToFixWiFi

Introduction

If your Brother printer keeps dropping offline, shows a wireless connection error, or refuses to join a new router, you may need to learn How to Reset Wifi Brother Printer? Resetting the wireless settings clears old network information and gives the printer a clean starting point. This guide explains when a reset is useful, how to perform it safely, and how to reconnect your printer to Wi-Fi without losing time or patience.

Brother printers are popular because they are reliable, affordable, and easy to set up, but wireless networking can still become complicated after a router change, password update, firmware issue, or network interference. A reset is not always the first step, but it is one of the most effective solutions when simpler troubleshooting fails. By the end of this article, you will understand the difference between restarting and resetting, the safest reset methods, and the exact reconnection process for Windows, macOS, and mobile devices.

Table of Contents

What Does Resetting Wi-Fi on a Brother Printer Mean?

A Wi-Fi reset is not the same as turning the printer off and on. Restarting the printer simply refreshes its temporary state. Resetting wireless settings removes saved network names, passwords, IP details, and sometimes other network-related preferences. After the reset, the printer behaves as if it is connecting to Wi-Fi for the first time.

There are usually two levels of reset. A network-only reset clears wireless and wired network settings while keeping print quality settings, paper settings, and user preferences. A full factory reset restores the printer to its original condition. For most users asking How to Reset Wifi Brother Printer?, the network-only reset is the better choice because it solves connection problems without erasing every personal setting.

Brother printers vary by model. Some have a color touchscreen, some have a small LCD, and some use LED indicators. The exact menu names may differ slightly, but the overall process is similar: open the network menu, choose reset or setup, confirm, and then reconnect to your wireless network.

When Should You Reset the Wi-Fi Connection?

You should consider a wireless reset when the printer was previously connected but now cannot communicate with your computer or phone. Common situations include changing your router, changing your Wi-Fi password, upgrading to a mesh network, moving the printer to a new room, or adding a new internet provider. These changes can cause the printer to keep trying an old network configuration.

A reset may also help if the printer shows messages such as “Connection failed,” “Unable to connect,” “Offline,” or “Authentication error.” If the printer connects to Wi-Fi but printing is slow, unreliable, or interrupted, the issue may be signal strength rather than settings. In that case, moving the printer closer to the router or reducing interference may be more useful than a reset.

Before resetting, try simpler steps such as restarting the router, restarting the printer, checking the Wi-Fi password, and printing a network configuration page. If those steps do not work, a reset becomes a smart next move. Understanding How to Reset Wifi Brother Printer? helps you avoid unnecessary factory resets and protects your preferred printer settings.

Before You Begin: Safety and Preparation

Prepare a few details before you reset anything. Write down your Wi-Fi network name, often called the SSID, and your current Wi-Fi password. Make sure the printer is powered on and has paper loaded. If your printer uses a touchscreen, ensure it is responsive. If it uses buttons, keep the user guide nearby because button combinations can vary by model.

It is also helpful to know whether your network uses 2.4 GHz, 5 GHz, or both. Many Brother printers connect most reliably to 2.4 GHz networks, especially older models. If your router broadcasts separate network names for each band, choose the 2.4 GHz option during setup. If your router uses one combined name, the printer may still connect, but band steering can occasionally cause issues.

Do not perform a reset while the printer is updating firmware or printing an important job. Wait until it is idle. If you are in an office, inform other users because the printer will temporarily disappear from the network. Also, avoid resetting during a storm or unstable power condition, since an interrupted reset can create more problems.

How to Reset Wifi Brother Printer? Step-by-Step Methods

The best reset method depends on your printer model and control panel. Most Brother printers allow you to reset network settings directly from the device. Some models support WPS, which can reconnect without typing a password. Others work well with Brother software on a computer. Use the method that matches your situation.

If you are unsure which method to choose, start with the control panel reset. It is the most direct and usually the most reliable. It clears old wireless data and lets you enter fresh network details. If you only need to reconnect after a router change, WPS can be faster, but it may not work with every router or network security setup.

Method 1: Reset Network Settings from the Control Panel

This method is ideal for most users. It clears saved wireless information while keeping other printer settings intact. The exact labels may vary, but the path is usually similar.

  1. Turn on the Brother printer and wait until it is idle.
  2. Press the Menu or settings icon on the control panel.
  3. Navigate to Network, WLAN, or Wireless LAN.
  4. Select Network Reset, Reset Network Settings, or Factory Reset if no network-only option is available.
  5. Confirm the reset when prompted.
  6. Wait for the printer to restart. This may take one to three minutes.
  7. When the printer returns to the home screen, begin the wireless setup process.

On touchscreen models, you may see options such as Setup Wizard after the reset. Select it, choose your Wi-Fi network, and enter the password carefully. Pay attention to uppercase letters, symbols, and spaces. A single incorrect character is enough to cause an authentication failure.

If your model has no touchscreen, use the arrow buttons to scroll and the OK or Set button to confirm. Some printers ask you to choose between Infrastructure and Ad-hoc. For normal home or office Wi-Fi, choose Infrastructure.

Method 2: Use WPS for a Quick Wireless Reconnection

WPS, or Wi-Fi Protected Setup, allows devices to connect without manually entering a password. This method is useful when you know your router supports WPS and you want a faster setup. However, WPS is not available on every router, and some networks disable it for security reasons.

  1. Make sure the printer is powered on and near the router.
  2. Press the WPS or Wi-Fi button on the router if it has one.
  3. On the Brother printer, open the wireless setup menu.
  4. Select WPS, Push Button Method, or Auto.
  5. Wait for the printer and router to negotiate the connection.
  6. Look for a confirmation message or steady wireless light.

If WPS fails, do not keep pressing the button repeatedly. Wait a minute and try again, or switch to manual setup. Repeated attempts can temporarily lock the router’s WPS feature. If your router requires a PIN instead of a push button, use the printer’s WPS PIN method and enter that PIN in your router settings.

Method 3: Temporarily Use USB or Ethernet to Restore Wireless Settings

If the control panel is difficult to use, or if you need to configure advanced network settings, connect the printer temporarily with USB or Ethernet. This method can be especially helpful in offices where multiple computers need access to the printer.

  1. Connect the printer to a computer using a USB cable or to the router using an Ethernet cable.
  2. Install or open Brother printer software on the computer.
  3. Find the network configuration or wireless setup tool.
  4. Reset or reconfigure the wireless settings through the software.
  5. Enter the correct SSID and password.
  6. Disconnect the cable after the wireless connection is confirmed.

This method is also useful when the printer’s small screen makes password entry frustrating. Typing a long password on a tiny keypad can lead to mistakes. Using a computer keyboard reduces errors and lets you verify the network name before saving.

Method 4: Use Brother Software or Web-Based Tools

Brother provides utilities that can help manage network settings. Depending on your model and operating system, you may use Brother iPrint&Scan, BRAdmin Light, BRAdmin Professional, or a web-based configuration page. These tools can display the printer’s IP address, connection status, and wireless settings.

To use a web-based tool, first print a network configuration page from the printer. Find the IP address, enter it into a web browser on the same network, and log in if required. From there, you may be able to reset or update wireless settings. Always use the official Brother software or documentation for your model, because menu paths and default passwords can differ.

Software-based setup is convenient, but it should not replace a basic control panel reset when the printer is completely disconnected. If the printer has no IP address or is not visible on the network, start with the physical reset method first.

How to Reconnect Your Brother Printer to Wi-Fi

After resetting, the printer is ready for a fresh connection. The general process is to select your Wi-Fi network, enter the password, and wait for confirmation. Once connected, the printer receives an IP address from the router. That IP address is important for computer and mobile setup.

If your printer has a touchscreen, use the wireless setup wizard. If it has buttons, use the network menu. If your router has separate 2.4 GHz and 5 GHz names, choose the band your printer supports. For most Brother printers, especially older models, 2.4 GHz is the safest choice. If the printer supports 5 GHz, the manual or specification sheet will usually say so.

After connecting, print a test page or network configuration report. This confirms that the printer has joined the network and can communicate with other devices. If the test page prints but your computer still cannot find the printer, the issue may be driver or firewall related rather than Wi-Fi related.

Reconnecting on Windows

Windows users can reconnect through the Brother software, Windows settings, or the printer installation wizard. The easiest option is often to run the Brother installation software again. The software can search for the printer on the network and install or update the driver.

  1. Ensure the printer is connected to Wi-Fi.
  2. Open Settings and go to Bluetooth & devices or Devices, depending on your Windows version.
  3. Select Printers & scanners.
  4. Click Add device or Add a printer or scanner.
  5. Wait for Windows to detect the Brother printer.
  6. Select the printer and follow the prompts to install the driver.

If Windows does not detect the printer, use the Brother installer or enter the printer’s IP address manually. Some Brother models support a standard TCP/IP port, which can be added through the printer properties. You may also need to allow the printer through Windows Defender Firewall. If the printer appears offline, check whether “Use Printer Offline” is enabled in the print queue.

When multiple Brother printers have been installed over time, old printer entries can confuse Windows. Remove outdated printer entries before adding the freshly reset device. This keeps the system clean and prevents sending jobs to a printer that no longer exists on the network.

Reconnecting on macOS

On a Mac, you can add the printer through System Settings. macOS usually detects AirPrint-compatible Brother printers automatically, but installing the Brother driver may provide more features, such as duplex settings, toner monitoring, and maintenance tools.

  1. Connect the printer to Wi-Fi first.
  2. Open System Settings on your Mac.
  3. Go to Printers & Scanners.
  4. Click the add button, usually shown as a plus icon.
  5. Select the Brother printer from the list.
  6. Choose the appropriate driver or AirPrint option.
  7. Click Add.

If the printer does not appear, click the IP tab and enter the printer’s IP address manually. Use the correct protocol, such as AirPrint or Line Printer Daemon, depending on your model. After adding the printer, print a test page from a simple application such as TextEdit or Preview.

macOS can sometimes hold onto old printer queues. If printing fails, remove the old Brother printer entry and add it again. Restarting the Mac after a network reset can also clear stale connection data.

Reconnecting from a Mobile Device

Mobile printing is convenient, especially for quick documents, photos, boarding passes, and school forms. After resetting the printer, install the official Brother app on your phone or tablet. The app can guide you through wireless setup and may detect the printer automatically once it is on the same network.

Make sure your mobile device is connected to the same Wi-Fi network as the printer. If your phone is on mobile data or a different network, the app may not find the printer. Turn off mobile data temporarily if needed, or connect to the correct Wi-Fi network before opening the app.

After setup, try printing a small test document. If the app reports that the printer is offline, check whether the printer is in sleep mode, whether the app has local network permission, and whether the router isolates devices from each other. Some guest networks block device-to-device communication, so avoid using a guest network for printing.

How to Verify the Printer Is Connected

Verification prevents false assumptions. A printer can appear connected to Wi-Fi but still fail to print because of driver, firewall, or IP issues. Start by checking the printer’s control panel. Most Brother printers show a wireless icon or network status. A steady light or “Connected” message is a good sign.

Next, print a network configuration page. This page usually includes the SSID, signal strength, IP address, subnet mask, and gateway. Confirm that the SSID matches your current network. If the IP address starts with 169.254, the printer did not receive an address from the router and may still be disconnected.

Then, send a test print from a computer and a mobile device. If both work, your reset and reconnection were successful. If only one works, the printer is likely connected, but the failing device has a driver, app, or network issue.

Troubleshooting Common Wi-Fi Reset Problems

Even after a reset, issues can occur. The most common problem is entering the wrong Wi-Fi password. Passwords are case-sensitive, and hidden characters can cause confusion. If possible, type the password into a text editor first, then copy it carefully into the printer or software setup field.

Another common issue is router band incompatibility. If your printer only supports 2.4 GHz but you selected a 5 GHz network, the connection will fail. Check your router settings and choose the correct band. If your router uses band steering, temporarily disable it or connect through a dedicated 2.4 GHz network name.

Signal strength matters. If the printer is far from the router, behind thick walls, or near microwaves, cordless phones, or other electronics, the connection may be unstable. Move the printer closer during setup, then test whether it remains stable in its final location. A Wi-Fi extender or mesh node can help in large homes.

If the printer repeatedly disconnects, update its firmware if Brother provides an update. Also check whether your router has MAC address filtering enabled. If it does, add the printer’s MAC address to the allowed list. The MAC address is usually printed on the network configuration page.

When all else fails, perform a full factory reset and set the printer up again from scratch. This takes longer but can resolve stubborn configuration conflicts. Keep in mind that a factory reset may erase custom settings, so use it only when a network-only reset does not solve the problem.

Comparison of Brother Wi-Fi Reset Methods

Method Best For Difficulty Keeps Other Settings?
Control panel network reset Most users and most models Easy to moderate Yes, usually
WPS setup Quick reconnection with supported routers Easy Yes
USB or Ethernet setup Difficult passwords or office setups Moderate Yes
Software or web-based tools Advanced configuration and monitoring Moderate to advanced Usually yes
Full factory reset Persistent or complex network issues Moderate No

This comparison shows that you do not always need the most aggressive reset. Start with the simplest method that matches your situation. If a network-only reset and fresh setup solve the issue, you avoid unnecessary changes to print settings, paper settings, and user preferences.

Tips and Best Practices

  • Write down your Wi-Fi password before starting so you do not have to search for it mid-setup.
  • Use the 2.4 GHz band unless your Brother model clearly supports 5 GHz.
  • Place the printer within a reasonable distance of the router during setup.
  • Print a network configuration page after connecting to confirm the IP address and SSID.
  • Remove old printer entries from Windows or macOS to prevent confusion.
  • Update printer firmware and drivers when possible.
  • Avoid guest networks for printing because they may block device communication.
  • Use a UPS or stable power source in areas with frequent power interruptions.
  • Keep the Brother manual or model support page available for exact menu names.
  • Do not reset the printer repeatedly in a short time; give the router and printer time to reconnect.

These best practices make the process smoother and reduce the chance of recurring connection problems. A reset is only one part of reliable wireless printing; network quality, router settings, and device configuration also matter.

Frequently Asked Questions

Will resetting Wi-Fi erase my printer settings?

A network-only reset usually clears wireless settings but keeps print quality, paper size, and other preferences. A full factory reset can erase more settings, so choose carefully.

How long does a Brother printer Wi-Fi reset take?

The reset itself often takes one to three minutes. Reconnecting and installing drivers may take additional time depending on your computer and network.

Why does my Brother printer connect to Wi-Fi but still show offline?

The printer may be connected, but the computer may use an old driver, wrong IP address, or outdated printer queue. Remove old entries and add the printer again.

Can I reset a Brother printer without a screen?

Some models use button combinations or LED indicators. Check the user guide for your specific model, as the process varies.

Should I use 2.4 GHz or 5 GHz?

Many Brother printers work best on 2.4 GHz. Use 5 GHz only if your model supports it and your router provides a compatible connection.

What if I forgot my Wi-Fi password?

You will need to recover or reset the router password first. The printer cannot connect without the correct network credentials.

Is WPS safe to use?

WPS is convenient, but some security professionals recommend disabling it when not needed. If your network requires strong security, use manual password entry instead.

Do I need to reinstall drivers after a reset?

Not always. If the printer keeps the same IP address and the computer already has the correct driver, it may continue working. If not, reinstall or re-add the printer.

Conclusion

Learning How to Reset Wifi Brother Printer? is a practical skill for anyone who relies on wireless printing at home or in the office. A reset clears outdated network data, resolves many connection errors, and gives you a clean path to reconnect. Start with a network-only reset when possible, use WPS or manual setup based on your router, and verify the connection with a test print. By following the methods, troubleshooting tips, and best practices in this guide, you can reconnect your printer quickly and get back to productive printing with minimal frustration.