How to Reset Hero3+ Wifi Password? Reset For Printer Recovery

Introduction

The GoPro Hero3+ is still a capable action camera, and one of its most useful features is built-in WiFi. That wireless connection lets you pair the camera with the GoPro app, preview shots, transfer footage, and control the camera remotely. But like any wireless device, the Hero3+ can become a source of frustration when you forget the WiFi password, buy a secondhand unit with unknown credentials, or run into connectivity problems after changing your home network.

If you are searching for How to Reset Hero3+ Wifi Password?, you are in the right place. This guide covers every practical method for resetting or changing the WiFi credentials on a GoPro Hero3+, from physical button resets to app-based recovery. It also explains how this process fits into a broader network recovery scenario, which is where the phrase Reset For Printer Recovery comes into play.

At first glance, a GoPro camera and a printer seem unrelated. However, many homes and small offices run multiple WiFi devices on the same network. If you reset your Hero3+ WiFi settings, or if you are troubleshooting a network after a router change, you may also need to recover or reconfigure a WiFi-enabled printer. This article walks through the camera reset process in detail and then shows how to handle printer recovery on the same network so that all your devices can communicate properly again.

By the end of this article, you will know exactly how to reset the Hero3+ WiFi password, how to reconnect the camera to your phone or tablet, and how to recover printer connectivity after a network reset. Let us begin with a quick overview of how the Hero3+ WiFi system works.

Table of Contents

• Introduction
• Understanding the GoPro Hero3+ WiFi System
• Why You Might Need to Reset the Hero3+ WiFi Password
• Printer Recovery and Network Context
• Pre-Reset Checklist
• Method 1: Physical Reset via Camera Buttons
• Method 2: Resetting Through the GoPro App
• Method 3: Manually Re-Entering WiFi Credentials
• Step-by-Step: Printer Recovery After WiFi Reset
• Comparison: Reset Methods at a Glance
• Troubleshooting Common Issues
• Tips and Best Practices
• Frequently Asked Questions
• Conclusion

Understanding the GoPro Hero3+ WiFi System

The GoPro Hero3+ was released as part of GoPro’s popular Hero3 lineup, and it includes integrated WiFi that works with the GoPro mobile app. When WiFi is enabled, the camera broadcasts its own wireless network, usually with an SSID that includes “GOPRO” and the camera’s model name. To connect, you select that network on your smartphone or tablet and enter the WiFi password.

Out of the box, the Hero3+ ships with a default WiFi password. Many users never change it, which is convenient until the password is forgotten or the camera is sold to someone else. The WiFi system operates on the 2.4 GHz band, which means it has decent range but can be affected by interference from microwaves, baby monitors, and other household electronics.

Understanding this system matters because How to Reset Hero3+ Wifi Password? is not just about typing a new code into a router. The camera itself stores the WiFi credentials, and the reset process happens either through the camera’s on-device menu or through the GoPro app. There is no physical reset pinhole specifically for WiFi on the Hero3+, so you must follow the correct menu sequence to restore default wireless settings.

It is also worth noting that the Hero3+ is older hardware. It does not support the latest WiFi security standards found on modern routers, and it may not appear on 5 GHz-only networks. If you are resetting the camera because it will not connect after a router upgrade, keep this limitation in mind. Your router may need to broadcast a 2.4 GHz network for the camera to see it at all.

Why You Might Need to Reset the Hero3+ WiFi Password

There are several common reasons why someone needs to perform a WiFi password reset on a GoPro Hero3+. The most frequent scenario is simply forgetting the current password. If you changed the default password months ago and did not write it down, the camera will refuse to pair with the GoPro app until you reset it.

Buying a used Hero3+ is another common trigger. The previous owner may have set a custom password and forgotten to remove it. In that case, you cannot connect the camera to your phone until you reset the WiFi settings to factory defaults and create your own credentials.

Selling or giving away the camera is the reverse situation. You should reset the WiFi password and remove all paired devices so the new owner starts with a clean slate. This protects your privacy and prevents someone else from accessing your camera remotely.

Network changes can also force a reset. If you replaced your router, changed your WiFi network name, or updated your router’s security settings, the Hero3+ may no longer connect automatically. Resetting the camera’s WiFi lets you re-enter the correct credentials and re-establish the link.

Finally, there is the printer recovery angle. If your Hero3+ and your WiFi printer share the same network, a router reset or password change can break communication between devices. After resetting the camera’s WiFi, you may find that you also need to recover printer settings so that both devices can operate on the network again. We will cover that scenario in detail later in this guide.

Printer Recovery and Network Context

The title of this article mentions Reset For Printer Recovery, which might seem odd when discussing a GoPro camera. The connection is purely network-based. In many households, the GoPro Hero3+ is used to capture footage that is later transferred to a computer or sent to a WiFi-enabled printer for physical copies. If the network goes down or the WiFi credentials change, both the camera and the printer can lose their connection.

When you reset the Hero3+ WiFi password, you are essentially clearing the camera’s stored wireless identity. If your printer was configured to discover devices on the same network, it may no longer see the camera until both are reconnected to the router. Likewise, if you reset your router to recover printer access, the Hero3+ will lose its stored network information and need a fresh WiFi setup.

This guide treats the two tasks as related but separate. First, you reset the Hero3+ WiFi password using the methods below. Then, if your printer is also offline, you follow the printer recovery steps to restore network printing. Handling them in the right order prevents you from chasing the wrong problem.

Pre-Reset Checklist

Before you begin the actual reset process, gather a few items so you do not get stuck halfway through. A little preparation saves time and reduces frustration.

• Fully charged Hero3+ battery or a reliable power source.
• The GoPro app installed on your smartphone or tablet.
• Knowledge of your camera’s exact model (Hero3+ Black or Silver).
• A pen and paper to write down the new WiFi password.
• Access to your WiFi router’s network name and password, if you plan to reconnect the camera to your home network.
• Patience. Older GoPro menus respond slower than modern smartphone interfaces.

It is also smart to back up any important photos or videos stored on the camera’s microSD card. While a WiFi password reset should not delete your media, it is always good practice to have a copy before changing system settings.

Method 1: Physical Reset via Camera Buttons

The most direct way to answer How to Reset Hero3+ Wifi Password? is to use the camera’s own buttons and small LCD screen. This method does not require a smartphone, which makes it ideal if you cannot pair the camera with the GoPro app.

1. Power on the GoPro Hero3+ by pressing the Power/Mode button.
2. Press the Shutter/Select button to enter the main menu.
3. Use the Power/Mode button to cycle through the menu options until you reach Setup.
4. Press Shutter/Select to enter the Setup menu.
5. Scroll through the Setup options using the Power/Mode button until you find WiFi or Wireless.
6. Press Shutter/Select to enter the WiFi submenu.
7. Look for an option labeled Reset, Reset WiFi, or Reset Passcode.
8. Press Shutter/Select to confirm the reset.
9. If prompted, choose Yes or OK to restore default WiFi settings.
10. Power the camera off and back on to apply the changes.

After the reset, the camera should broadcast its default WiFi network again. You can connect using the factory default password, which is often printed on a sticker inside the battery compartment or listed in the user manual. Once connected, open the GoPro app and set a new custom password so you do not have to repeat this process soon.

If the camera’s menu is unresponsive, try a soft reset first. Remove the battery, wait about thirty seconds, and reinsert it. Then power the camera on and attempt the menu reset again. This clears temporary glitches without erasing any settings.

Method 2: Resetting Through the GoPro App

If you already have the GoPro app installed and the camera is currently paired, you can reset or change the WiFi password from your phone. This is usually the most user-friendly method because the app provides a visual interface instead of the camera’s tiny screen.

1. Make sure the Hero3+ is powered on and WiFi is enabled.
2. Open the GoPro app on your smartphone or tablet.
3. Connect to the camera’s WiFi network from your device’s wireless settings if you are not already connected.
4. In the GoPro app, select your Hero3+ from the camera list.
5. Navigate to the camera settings or setup menu within the app.
6. Locate the WiFi Settings, Wireless Settings, or Password option.
7. Choose Change Password or Reset WiFi.
8. Enter your desired new password. Use something memorable but hard to guess.
9. Save the changes and wait for the app to confirm that the camera has updated.
10. Reconnect your phone to the camera using the new password.

One limitation of this method is that it requires the camera and app to already be communicating. If you have completely forgotten the password and cannot pair the app, you must use Method 1 (physical buttons) or Method 3 (manual credential re-entry) instead.

Method 3: Manually Re-Entering WiFi Credentials

Sometimes the issue is not the camera’s password but the network it is trying to join. If you reset your router or changed your home WiFi name, the Hero3+ may still be trying to connect to the old network. In this case, you need to manually re-enter the correct credentials.

Start by turning on the camera and entering the WiFi setup menu as described in Method 1. Instead of choosing Reset, look for an option to Add Network, Connect to Network, or Manual Setup. Enter your router’s SSID exactly as it appears, including capitalization. Then enter your WiFi password. Save the settings and test the connection.

This method is especially useful during printer recovery scenarios. If your router was reset to restore printer access, every WiFi device on the network—including the Hero3+—must be told to reconnect. Manually entering credentials ensures the camera joins the correct network and does not keep broadcasting an outdated SSID.

Step-by-Step: Printer Recovery After WiFi Reset

Once you have reset the Hero3+ WiFi password, turn your attention to the printer if it is also offline. Network printers often lose their connection after a router reset, password change, or IP address conflict. Follow these steps to recover printer functionality:

1. Identify your printer model and locate its network settings menu. This is usually found on the printer’s control panel under Network, Wireless Settings, or Setup.
2. Print a network configuration page from the printer’s menu. This page shows the current IP address, SSID, and signal strength.
3. If the printer is not connected to your WiFi, choose Wireless Setup Wizard or WiFi Setup and select your home network.
4. Enter your WiFi password carefully. Printers are often case-sensitive.
5. Wait for the printer to confirm a successful connection. Print another network configuration page to verify the new IP address.
6. On your computer or mobile device, remove the old printer entry and add the printer again using its new IP address or automatic discovery.
7. Send a test print to confirm that the recovery was successful.
8. Reconnect the GoPro Hero3+ to the same network if you plan to transfer files wirelessly.

If the printer still does not appear, power cycle both the printer and the router. Unplug them for at least thirty seconds, plug the router in first, wait for it to fully boot, and then plug in the printer. This sequence often resolves lingering IP conflicts.

Comparison: Reset Methods at a Glance

The table below summarizes the three main approaches to answering How to Reset Hero3+ Wifi Password? so you can choose the one that fits your situation.

Method	Difficulty	Time Required	Best For	Pros	Cons
Physical Reset via Camera Buttons	Easy	2–3 minutes	Forgot password, no smartphone available	No app needed; works even if pairing failed	Small screen; slower menu navigation
Resetting Through the GoPro App	Easy	3–5 minutes	Already paired camera and phone	Visual interface; easy to set custom password	Requires app and existing connection
Manually Re-Entering WiFi Credentials	Moderate	5 minutes	Router or network name changed	Full control over which network the camera joins	Need to know router SSID and password
Factory Reset (Full Camera Reset)	Moderate	5–10 minutes	Selling camera or major software issues	Wipes all settings; fresh start	Erases custom preferences; takes longer

Troubleshooting Common Issues

Even after following the reset steps, you may run into a few hiccups. Here are the most common problems and how to fix them.

Camera will not enter the WiFi menu. Make sure the camera is fully powered on and not in recording mode. Some menu options are hidden while the camera is actively capturing video. Stop recording, return to the main screen, and try again.

GoPro app cannot find the camera. Verify that WiFi is enabled on the Hero3+. Then check your phone’s WiFi settings and make sure you are connected to the camera’s network, not your home router. If you recently changed the password, forget the old network on your phone and reconnect using the new credentials.

Password is rejected after reset. Double-check capitalization and special characters. WiFi passwords are case-sensitive. If you are using the default password, look for it inside the battery compartment or on the original packaging.

Printer does not appear after network reset. Print a network configuration page from the printer to confirm its IP address. If the IP address changed, remove and re-add the printer on your computer. Power cycle the router and printer if necessary.

Connection drops frequently. The Hero3+ uses 2.4 GHz WiFi, which can be crowded. Move the camera closer to the router, or temporarily turn off other 2.4 GHz devices like microwaves during setup.

Tips and Best Practices

Resetting a WiFi password is only half the battle. Keeping your Hero3+ and printer on a stable network requires a few ongoing habits.

• Write down your WiFi password and store it in a safe place. You will need it if you ever reset the camera again.
• Use a strong but memorable password. Avoid default passwords if you plan to keep the camera long term.
• Update the GoPro app whenever a new version is available. Older app versions may not pair reliably with the Hero3+.
• Turn off WiFi on the camera when you are not using it. This conserves battery life and reduces unwanted network traffic.
• Label secondhand cameras with the date you reset them, so you know when the credentials were last changed.
• If you have multiple WiFi devices, keep a simple list of which devices are connected to which network. This makes printer recovery and camera setup much faster after a router change.

Frequently Asked Questions

What is the default WiFi password for the Hero3+?

The default password varies by region and unit, but it is often printed on a label inside the battery compartment or included in the printed manual. If you cannot find it, a physical WiFi reset through the camera menu should restore the factory default.

Can I reset the Hero3+ WiFi password without the GoPro app?

Yes. Method 1 in this guide uses only the camera’s buttons and screen. You do not need a smartphone to reset the WiFi password, although the app makes it easier to set a new custom password afterward.

Will resetting the WiFi password delete my videos and photos?

No. A WiFi password reset only affects wireless network settings. Your photos and videos stored on the microSD card remain untouched. A full factory reset might clear custom preferences, but it still should not delete media files.

How does resetting the Hero3+ WiFi help with printer recovery?

It does not directly fix the printer, but both devices often share the same network. If you reset your router or change WiFi credentials to recover printer access, the Hero3+ will lose its connection too. Resetting and reconfiguring the camera’s WiFi ensures both the camera and printer can operate on the same network again.

How often should I reset the Hero3+ WiFi password?

Only when necessary. Reset it if you forget the password, buy or sell a used camera, change your router, or experience persistent connection problems. There is no need to reset it on a regular schedule.

What should I do if the camera freezes during the reset?

Remove the battery, wait thirty seconds, and reinsert it. Power the camera back on and retry the reset process from the beginning. If the problem persists, check for firmware updates using the GoPro app or GoPro’s website.

Can I use the same WiFi password for my camera and printer?

You can, but it is not required. Each device stores its own credentials independently. Using the same password can make things easier to remember, but using unique passwords for each device is slightly more secure.

Is the GoPro Hero3+ still supported?

GoPro no longer provides active software updates for the Hero3+, but the camera still works for basic recording and WiFi pairing. You may need to rely on older versions of the GoPro app or third-party tools for some features.

Conclusion

Resetting the WiFi password on a GoPro Hero3+ is a straightforward process once you know where to look. Whether you use the camera’s physical buttons, the GoPro app, or manual credential re-entry, the goal is the same: restore wireless connectivity so you can control the camera and transfer your footage without hassle.

If your network troubles extend beyond the camera, remember that printer recovery often follows the same logic. After resetting your router or changing WiFi settings, both the Hero3+ and any WiFi printers on your network may need to be reconnected. By handling the camera reset first and then verifying printer connectivity, you can get your entire wireless setup back online efficiently.

Keep your new password written down, keep your app updated, and turn off WiFi when you do not need it. With those habits in place, you will spend less time troubleshooting and more time capturing the moments that matter.