
How to Reconnect Ring Devices to New Wifi? Easy Instructions for Reconnect
Introduction Changing your home WiFi network is a common occurrence. You might have upgraded to a faster internet plan, switched internet service providers, moved to a new house, or simply replaced an old router with a newer model. Whatever the reason, one thi
Introduction
Changing your home WiFi network is a common occurrence. You might have upgraded to a faster internet plan, switched internet service providers, moved to a new house, or simply replaced an old router with a newer model. Whatever the reason, one thing often gets overlooked in the process: your smart home devices. If you own Ring video doorbells, security cameras, chimes, or alarm components, changing your WiFi can leave them offline and unable to record, stream, or send alerts.
This guide walks you through How to Reconnect Ring Devices to New Wifi? step by step. Whether you are dealing with a battery-powered doorbell, a hardwired camera, or a Ring Chime, the instructions below will help you get your devices back online quickly. You will also learn what to do if the standard process fails, what WiFi settings Ring devices require, and how to prevent connection problems in the future.
Reconnecting Ring devices is not difficult, but it does require patience and the right information. By the end of this article, you will know exactly how to move your Ring ecosystem from an old network to a new one without losing your settings, recorded videos (stored in the cloud if you have a subscription), or device configurations.
Table of Contents
- Introduction
- Why You Might Need to Reconnect Ring Devices to New WiFi
- Before You Start: What You’ll Need
- How to Reconnect Ring Devices to New WiFi: General Overview
- Reconnecting a Ring Doorbell to New WiFi
- Reconnecting a Ring Security Camera to New WiFi
- Reconnecting a Ring Chime to New WiFi
- Reconnecting Ring Alarm Components to New WiFi
- Using the Ring App to Change WiFi Network
- Troubleshooting Common Reconnection Issues
- WiFi Requirements for Ring Devices
- Ring Device Reconnection Comparison
- Tips and Best Practices for Stable Ring WiFi Connection
- When to Contact Ring Support
- Frequently Asked Questions
- Conclusion
Why You Might Need to Reconnect Ring Devices to New WiFi
Ring devices rely on a wireless internet connection to communicate with Ring’s cloud servers. When that connection changes, the devices do not automatically know how to find the new network. Unlike a smartphone or laptop, which can often remember multiple networks, most Ring devices store only one set of WiFi credentials at a time.
Here are the most common situations where you will need to learn How to Reconnect Ring Devices to New Wifi?:
- You replaced your router or modem.
- You switched to a new internet service provider.
- You changed your WiFi network name (SSID) or password.
- You moved to a new home and brought your Ring devices with you.
- Your router was reset to factory settings, erasing custom network names.
- You created a separate guest network and want to move Ring devices onto it.
- Your Ring device went offline after a power outage and will not reconnect automatically.
In each case, the device will typically show as “Offline” in the Ring app. You may also notice that live view stops working, motion alerts stop arriving, and recorded events are no longer uploaded. Reconnecting the device restores these features.
Before You Start: What You’ll Need
Before you begin the process of reconnecting your Ring devices, gather the following items. Having everything ready will make the job faster and reduce frustration.
- The Ring app: Installed on your smartphone or tablet and logged into your Ring account.
- New WiFi network name and password: Make sure you know the exact SSID and password for the network you want to use.
- Physical access to the device: You may need to press a setup button on the doorbell, camera, or chime.
- A charged smartphone: Reconnection can take several minutes per device.
- Knowledge of your WiFi band: Most Ring devices connect only to 2.4 GHz networks, not 5 GHz.
- Patience: Some older Ring devices take longer to join a network than newer ones.
It is also a good idea to place your phone near the Ring device during setup. This ensures a strong signal between your phone, the device, and your router.
How to Reconnect Ring Devices to New WiFi: General Overview
While exact steps vary slightly by device type, the general workflow for How to Reconnect Ring Devices to New Wifi? follows the same pattern:
- Open the Ring app and select the offline device.
- Go to Device Health.
- Choose the option to change or reconnect the WiFi network.
- Put the Ring device into setup mode by pressing its setup button.
- Connect your phone to the temporary Ring WiFi network if prompted.
- Select your new home network from the list and enter the password.
- Wait for the device to confirm it is online.
Some devices allow you to change WiFi entirely within the app without pressing a physical button, while others require you to enter setup mode first. The sections below cover each device category in detail.
Reconnecting a Ring Doorbell to New WiFi
Ring doorbells are among the most popular Ring products, and they come in several versions: battery-powered, hardwired, Pro, Elite, and more. The reconnection process is similar across models, but the setup button location differs.
Step-by-Step Instructions for Ring Doorbells
- Open the Ring app. Tap the three-line menu in the top left corner, then tap Devices.
- Select your doorbell. Choose the specific Ring doorbell that is offline.
- Go to Device Health. Tap the Device Health tile.
- Change WiFi Network. Look for Change WiFi Network or Reconnect to WiFi and tap it.
- Put the doorbell in setup mode.
- For most battery-powered Ring doorbells, press and release the small black or orange button on the back or side.
- For Ring Video Doorbell Pro, press the button on the side of the unit.
- For Ring Video Doorbell Elite, use the setup button inside the mounting bracket.
- Connect to the temporary Ring network. Your phone may disconnect from your home WiFi and join a network named something like
Ring-123456. This is normal. - Select your new network. In the app, choose your new home WiFi from the list of available networks.
- Enter the password. Type the WiFi password carefully. Passwords are case-sensitive.
- Wait for confirmation. The doorbell will attempt to connect. Once successful, the app will show the device as online.
If your doorbell is hardwired and does not enter setup mode, make sure the power is on at the breaker and that the chime kit is compatible. A doorbell without power cannot reconnect to WiFi.
Reconnecting a Ring Security Camera to New WiFi
Ring security cameras include indoor cameras, stick-up cameras, spotlight cameras, and floodlight cameras. Like doorbells, most cameras operate on 2.4 GHz WiFi only. If your router broadcasts a combined 2.4 GHz and 5 GHz network under the same name, the camera should still connect, but you may need to temporarily separate the bands if you experience issues.
Step-by-Step Instructions for Ring Cameras
- Open the Ring app and go to Devices.
- Select the camera that needs reconnecting.
- Tap Device Health and choose Change WiFi Network.
- Press the setup button. The location depends on the model:
- Indoor Cam: Setup button is usually on the top or back.
- Stick Up Cam: Button is on the side or under the back cover.
- Spotlight Cam: Button is on the top or side of the housing.
- Floodlight Cam: Button is typically under the bottom cover or near the mounting bracket.
- Wait for the pulsing light. Many Ring cameras flash a white or blue light when in setup mode.
- Join the temporary Ring network on your phone if the app asks you to.
- Pick your new WiFi network and enter the password.
- Confirm the connection. The camera should reboot and come back online.
For hardwired cameras like the Floodlight Cam, turn off power at the breaker before adjusting the device, then restore power once it is remounted. Safety comes first when working with electrical fixtures.
Reconnecting a Ring Chime to New WiFi
The Ring Chime and Chime Pro plug into a wall outlet and extend your WiFi signal while also sounding an alert when someone presses your doorbell. Because they have no battery, they must remain plugged in during the entire reconnection process.
Step-by-Step Instructions for Ring Chime
- Plug the Chime into a wall outlet near your router during setup.
- Open the Ring app and select your Chime from Devices.
- Tap Device Health and look for Change WiFi Network.
- Press and hold the side button on the Chime until it enters setup mode. The light should begin to flash.
- Follow the in-app prompts to connect to the temporary Ring network.
- Select your new WiFi network and enter the password.
- Wait for the Chime to reboot and show as online in the app.
If you have a Chime Pro, it also acts as a WiFi extender. After reconnecting it to your new network, place it halfway between your router and your farthest Ring device for the best coverage.
Reconnecting Ring Alarm Components to New WiFi
Ring Alarm is a little different from cameras and doorbells. The Alarm Base Station connects to your internet either through an Ethernet cable or WiFi. Sensors, keypads, and motion detectors communicate with the Base Station using Z-Wave, not your home WiFi directly. Therefore, you usually only need to reconnect the Base Station itself.
Step-by-Step Instructions for Ring Alarm Base Station
- Open the Ring app and select your Base Station.
- Go to Device Health and choose Change WiFi Network if the Base Station is using WiFi.
- If using Ethernet, simply plug the Ethernet cable into your new router. The Base Station should reconnect automatically.
- If switching to WiFi, press the setup button on the Base Station (consult your model’s manual for the exact location).
- Select your new network and enter the password in the app.
- Wait for the Base Station to show online. Once it is back, all paired sensors and keypads should resume normal operation.
If your Base Station has a cellular backup subscription, it may remain active even if WiFi is down, but you should still restore the WiFi connection to avoid using cellular data unnecessarily.
Using the Ring App to Change WiFi Network
The Ring app is the central hub for managing device connections. Knowing how to navigate it makes How to Reconnect Ring Devices to New Wifi? much easier.
Start by opening the app and confirming you are logged into the correct account. From the main dashboard, tap the menu icon and select Devices. You will see a list of all Ring products associated with your account. Tap the device that is offline.
Inside the device dashboard, look for the Device Health section. This screen shows signal strength, battery status, and the current WiFi network name. If the network listed is your old one, tap Change WiFi Network. The app will guide you through putting the device into setup mode and entering the new credentials.
If you do not see a Change WiFi Network option, try removing the device from the app and re-adding it as a new device. This forces a fresh setup and lets you choose the new WiFi from the beginning. Only do this if the standard change option fails, as removing a device may delete some local event history depending on your subscription.
Troubleshooting Common Reconnection Issues
Even with clear instructions, things can go wrong. Below are common problems and how to fix them.
Device Will Not Enter Setup Mode
If pressing the setup button does not trigger a flashing light, the device may not have power. Check the battery level in the app for battery-powered devices. For hardwired devices, check the breaker and wiring. Press the button firmly and release it; you do not need to hold it down unless the manual says so.
Wrong WiFi Password
Double-check that you are entering the password for the correct network. Remember that WiFi passwords are case-sensitive. If you recently changed your router’s password, make sure all devices are using the new one.
Router Is Broadcasting Only 5 GHz
Most Ring devices do not support 5 GHz WiFi. If your router is set to 5 GHz only, the Ring device will not see the network. Log into your router settings and ensure a 2.4 GHz network is enabled. Some routers use “smart steering” to combine bands; if possible, temporarily give the 2.4 band a unique name during setup.
Weak Signal or Poor RSSI
If the device connects but shows a poor signal strength (RSSI) in Device Health, move the router closer to the device or install a Ring Chime Pro or WiFi extender. Thick walls, metal objects, and appliances like microwaves can interfere with the signal.
App Cannot Find the Device
Force-close the Ring app and reopen it. Toggle your phone’s WiFi off and on again. If the device still does not appear, perform a factory reset on the Ring device (usually by holding the setup button for 15–20 seconds) and add it as a new device in the app.
Router Security Settings Blocking Ring
Ring devices generally work best with WPA2 security. If your router is set to WPA3 only or has MAC address filtering enabled, the device may fail to connect. Temporarily adjust these settings if needed, then reconnect the Ring device.
WiFi Requirements for Ring Devices
Understanding what your Ring device needs from your network can prevent future disconnections. Here are the general requirements:
- Frequency: 2.4 GHz (802.11 b/g/n). A few newer models support 5 GHz, but 2.4 GHz is safest.
- Security: WPA or WPA2. WPA3-only networks may cause compatibility issues.
- Internet speed: Ring recommends at least 2 Mbps upload and download per device for video streaming.
- Signal strength: An RSSI value between -40 and -60 is good. Anything worse than -70 may cause video lag or disconnections.
You can check RSSI in the Ring app under Device Health. If the number is high (closer to -70 or -80), consider relocating your router or adding a mesh node.
Ring Device Reconnection Comparison
The table below summarizes how different Ring device types reconnect to a new WiFi network.
| Device Type | Setup Button Location | Reconnection Method | Temporary Network Name | Notes |
|---|---|---|---|---|
| Ring Video Doorbell (Battery) | Back or side button | App > Device Health > Change WiFi | Ring-XXXXXX | Needs charged battery |
| Ring Video Doorbell Pro | Side button | App > Device Health > Change WiFi | Ring-XXXXXX | Hardwired power required |
| Ring Indoor Cam | Top or back button | App > Device Health > Change WiFi | Ring-XXXXXX | Plug-in power |
| Ring Spotlight Cam | Top or side button | App > Device Health > Change WiFi | Ring-XXXXXX | Battery or hardwired |
| Ring Floodlight Cam | Under bottom cover | App > Device Health > Change WiFi | Ring-XXXXXX | Turn off breaker before handling |
| Ring Chime / Chime Pro | Side button | App > Device Health > Change WiFi | Ring-XXXXXX | Must stay plugged in |
| Ring Alarm Base Station | Varies by model | App > Device Health or Ethernet | N/A (usually) | Sensors use Z-Wave, not WiFi |
Tips and Best Practices for Stable Ring WiFi Connection
Reconnecting once is helpful, but keeping your Ring devices online is even better. Follow these tips to minimize future connection drops.
- Keep the same network name and password. If you replace a router, configure it with the same SSID and password as your old one. Your Ring devices may reconnect automatically without any manual steps.
- Use 2.4 GHz for Ring devices. Even if your router supports 5 GHz, Ring devices usually perform better on 2.4 GHz because it penetrates walls more effectively.
- Place the router centrally. Avoid putting the router inside a cabinet, behind a TV, or in a basement corner.
- Add a Chime Pro or extender. If you have a large home, a Ring Chime Pro can extend WiFi to doorbells and cameras at the edge of your property.
- Update the Ring app regularly. App updates often include connectivity improvements and bug fixes.
- Check Device Health monthly. Look at RSSI and battery levels so you can catch problems before a device goes fully offline.
- Power cycle your router occasionally. Unplugging the router for 30 seconds once every few weeks can clear temporary glitches.
When to Contact Ring Support
Most reconnection issues can be solved with the steps above. However, you should reach out to Ring Support if:
- The device will not enter setup mode after multiple attempts.
- The app consistently fails to detect the temporary Ring network.
- You suspect hardware damage, such as a doorbell that will not power on after a storm.
- You have tried a factory reset and the device still will not connect to any network.
- You see error codes in the app that are not explained in Ring’s help center.
Ring Support can run remote diagnostics and, if your device is under warranty, arrange a replacement if necessary.
Frequently Asked Questions
Do I need to remove the device from the app before reconnecting to new WiFi?
No. In most cases, you can use the Change WiFi Network option in Device Health without removing the device. Removing the device should be a last resort.
Will my recorded videos be lost when I reconnect to new WiFi?
No. Recorded videos are stored in Ring’s cloud servers (if you have a Ring Protect subscription), not on the device itself. Once the device reconnects, your video history remains accessible in the app.
Can Ring devices connect to 5 GHz WiFi?
Most Ring devices support only 2.4 GHz WiFi. A few newer models may support 5 GHz, but for the best compatibility, keep your Ring devices on a 2.4 GHz network.
How long does it take to reconnect a Ring device?
The process usually takes two to five minutes per device. Most of that time is spent waiting for the device to join the new network and confirm the connection.
Can I reconnect Ring devices without the app?
No. The Ring app is required to enter credentials and complete the WiFi change. There is no way to reconnect using only the physical device.
What does a flashing white light mean during setup?
A flashing white light generally means the device is in setup mode and ready to connect to a network. If the light flashes red or does not light up, check power and try pressing the setup button again.
Do Ring devices support WPA3 security?
Ring devices typically work best with WPA2. If your router is set to WPA3 only, you may need to switch to WPA2 or a mixed WPA2/WPA3 mode for Ring devices to connect.
Conclusion
Learning How to Reconnect Ring Devices to New Wifi? is an essential skill for anyone who owns Ring smart home security products. Whether you changed your router, updated your network password, or moved to a new home, the process is straightforward when you know where to look in the Ring app and which buttons to press on your devices.
Start by gathering your new WiFi name and password, then use the Device Health section in the Ring app to initiate the change. Put your doorbell, camera, chime, or alarm base station into setup mode, connect to the temporary Ring network, and enter your new credentials. If something goes wrong, check your router’s 2.4 GHz band, verify your password, and confirm the device has power.
By following the steps and best practices in this guide, you can keep your Ring devices online and your home protected. A stable WiFi connection means reliable motion alerts, clear video recordings, and peace of mind knowing your smart security system is working as it should.