Setup and Configuration

How to Connect Wifi to Brother Hl L2390dw? Brother Setup Steps

Introduction The Brother HL-L2390DW is a compact monochrome laser printer built for home offices and small workgroups. Although it supports a traditional USB connection, most users prefer the convenience of wireless printing. If you have been searching for how

HowToFixWiFi

Introduction

The Brother HL-L2390DW is a compact monochrome laser printer built for home offices and small workgroups. Although it supports a traditional USB connection, most users prefer the convenience of wireless printing. If you have been searching for how to connect Wifi to Brother Hl L2390dw?, this guide covers every step you need, from preparing your network to installing drivers and verifying that the printer is online.

Once the printer is connected to your WiFi network, you can print from laptops, desktops, smartphones, and tablets without running cables across the room. The Brother HL-L2390DW supports standard 2.4 GHz wireless networks using IEEE 802.11b/g/n. It does not connect to 5 GHz networks, so your router must have a 2.4 GHz band enabled or be running a mixed-mode network.

This article explains the three main ways to establish a wireless connection: WPS Push Button, the Wireless Setup Wizard, and WiFi Direct. It also walks you through driver installation, connection verification, troubleshooting, and best practices for keeping your printer online reliably.

Table of Contents

Why Go Wireless with Your Brother HL-L2390DW?

Connecting your Brother HL-L2390DW to WiFi offers several practical advantages over a USB-only setup. First, it eliminates the need for a physical cable between the printer and your computer, which means you can place the printer wherever there is a power outlet and a decent wireless signal. This is especially useful in shared spaces where multiple people need to print from different devices.

Second, wireless connectivity enables mobile printing. With the Brother iPrint&Scan app or built-in mobile printing features on iOS and Android, you can send documents and photos directly from your phone or tablet. You do not need to transfer files to a computer first.

Third, a wireless printer can serve multiple computers on the same network. Whether you have a Windows laptop, a MacBook, or a Linux machine, every device on the network can send print jobs to the HL-L2390DW as long as the correct drivers are installed. This makes the printer a true shared resource rather than a device tethered to a single PC.

If you are trying to figure out how to connect Wifi to Brother Hl L2390dw?, knowing these benefits can help you stay motivated through the setup process. Wireless printing is worth the initial configuration effort because it simplifies daily workflows and reduces cable clutter.

Prerequisites Before You Begin

Before you start the wireless setup, gather the following items and information. Having everything ready will make the process smoother and reduce the chance of errors.

  • Wireless router or access point: Your router must be powered on and broadcasting a 2.4 GHz WiFi network. The Brother HL-L2390DW does not support 5 GHz-only networks.
  • Network name (SSID): This is the name of your WiFi network as it appears when you search for wireless networks on a phone or laptop.
  • Network password: Also called the WPA/WPA2 key or passphrase. Have it handy because you will need to enter it during setup.
  • Power source: Place the printer near a power outlet and within reasonable range of your router.
  • Computer or mobile device: You will need a device on the same network to install drivers and test printing.
  • WPS button (optional): If you plan to use WPS Push Button mode, confirm that your router has a physical WPS button or a WPS option in its settings.

It is also a good idea to write down your printer’s model number, which is HL-L2390DW, so you can download the correct drivers from the Brother support website. If your router uses MAC address filtering, you may need to add the printer’s MAC address to the allowed list before it can join the network.

Overview of WiFi Connection Methods

The Brother HL-L2390DW supports more than one way to connect to a wireless network. Choosing the right method depends on your router’s features and your personal preference. Below is a brief overview of the three primary methods covered in this guide.

WPS Push Button Method

WiFi Protected Setup (WPS) Push Button is often the fastest way to connect a printer to WiFi. Instead of typing a password on the printer’s small control panel, you press a button on the printer and then press the WPS button on your router. The two devices exchange security credentials automatically. This method works best when your router has a physical WPS button and both devices are in the same room.

WiFi Direct Method

WiFi Direct allows your phone, tablet, or computer to connect directly to the printer without a wireless router. The printer creates its own wireless network, and your device joins that network just like it would join any other WiFi hotspot. This is useful if you do not have a router available or if you want to print from a mobile device in a location where the main network is unreliable.

Wireless Setup Wizard (Infrastructure Mode)

The Wireless Setup Wizard is the traditional method for connecting a printer to an existing WiFi network. Using the printer’s control panel, you select your network name from a list of available networks and enter the password manually. This method gives you full control over which network the printer joins and is ideal when WPS is not available or when you want to verify the exact SSID and password being used.

Step-by-Step: Connect via WPS Push Button

Follow these steps to connect your Brother HL-L2390DW to WiFi using WPS Push Button. This method is usually the quickest, but it requires that your router supports WPS and has an accessible WPS button.

  1. Place the printer within range of your wireless router and plug it into a power outlet.
  2. Turn on the printer by pressing the power button. Wait for the ready LED to stop flashing and remain solid.
  3. Press and hold the WiFi button on the printer for about two seconds, then release it. The WiFi LED should start flashing.
  4. Within two minutes, press the WPS button on your wireless router. Hold it for a few seconds until the router’s WPS LED begins to flash.
  5. Wait for the printer’s WiFi LED to stop flashing and remain solid. This indicates a successful connection to the network.
  6. Print a network configuration page from the printer’s control panel to confirm the IP address and connection status.

If the WiFi LED continues to flash after a minute or two, the connection may have failed. Move the printer closer to the router and repeat the steps. Keep in mind that the two-minute window is strict, so be ready to press the router’s WPS button immediately after activating WPS on the printer.

Step-by-Step: Connect via Wireless Setup Wizard

If your router does not have a WPS button, or if you prefer to enter your network credentials manually, use the Wireless Setup Wizard. This method is reliable and works with virtually any 2.4 GHz WiFi network.

  1. Power on the Brother HL-L2390DW and make sure it is in the ready state.
  2. Press the Menu button on the printer’s control panel.
  3. Use the up or down arrow buttons to navigate to Network, then press OK.
  4. Navigate to WLAN and press OK.
  5. Select Setup Wizard and press OK.
  6. When prompted to enable WLAN, select Yes and press OK. The printer will search for available networks.
  7. From the list of detected networks, select your SSID (network name) and press OK.
  8. If your network uses authentication, enter the password using the control panel buttons. Press OK to confirm.
  9. The printer will attempt to connect. When successful, the display will show Connected and the WiFi LED will turn solid.
  10. Press Go or Home to return to the main screen.

Entering a WiFi password on a printer control panel can be tedious, so take your time and double-check uppercase and lowercase letters. If the printer says Connection Failed, verify that you entered the correct password and that your router is broadcasting a 2.4 GHz network.

Step-by-Step: Connect via WiFi Direct

WiFi Direct is helpful when you want to print from a mobile device without using a traditional wireless router. The Brother HL-L2390DW acts as its own access point, and your phone or laptop connects directly to it.

  1. Press the Menu button on the printer.
  2. Navigate to Network, then WiFi Direct, and press OK.
  3. Select On to enable WiFi Direct mode.
  4. The printer will display its WiFi Direct network name (SSID) and password. Write these down or keep the screen visible.
  5. On your smartphone, tablet, or computer, open the WiFi settings and look for the printer’s network name.
  6. Select the network and enter the password shown on the printer’s display.
  7. Once connected, open the document or photo you want to print and select the Brother HL-L2390DW as the printer.

Remember that while connected to WiFi Direct, your device may lose access to the internet because it is connected to the printer rather than your main router. If you need internet access at the same time, use the Wireless Setup Wizard or WPS method instead.

Installing Brother Drivers and Software

Connecting the printer to WiFi is only half the process. Your computer also needs the correct drivers to communicate with the Brother HL-L2390DW over the network.

  1. Open a web browser and go to the official Brother support website.
  2. Search for HL-L2390DW and select your exact model from the results.
  3. Choose your operating system, such as Windows 10, Windows 11, or macOS.
  4. Download the Full Driver & Software Package. Avoid downloading only the printer driver if you want scanning and utility software as well.
  5. Run the downloaded installer and follow the on-screen prompts.
  6. When asked how you want to connect the printer, select Wireless Network Connection or WiFi.
  7. The installer should detect the printer on your network. If it does not, make sure your computer is connected to the same WiFi network as the printer.
  8. Complete the installation and print a test page to confirm everything works.

Mac users may need to add the printer manually through System Settings > Printers & Scanners after installing the drivers. Windows users can usually find the printer under Settings > Bluetooth & devices > Printers & scanners.

Verifying the WiFi Connection

After setup, you should verify that the Brother HL-L2390DW is truly connected to your WiFi network and not just showing a false ready status.

Print a network configuration page directly from the printer. On the control panel, go to Menu > Print Reports > Network Configuration and press OK. The printed page will show the SSID, signal strength, IP address, and connection status.

Look for an IP address in the format 192.168.x.x or 10.0.0.x. If the IP address starts with 169.254, the printer did not receive a valid address from your router, which means the connection is not working properly.

You can also test the connection from your computer. Open a command prompt or terminal and type:

ping [printer-ip-address]

Replace [printer-ip-address] with the actual IP shown on the configuration page. If you receive replies, the computer can reach the printer over the network. Finally, send a test print from any application to ensure the full printing chain is functional.

Troubleshooting Common WiFi Connection Issues

Even with careful setup, wireless printers sometimes encounter issues. Below are common problems and how to resolve them.

Printer Not Found on the Network

If your computer cannot detect the Brother HL-L2390DW, confirm that both the printer and computer are on the same network. Restart the printer and the router, then wait a few minutes for the printer to reconnect. Check the printer’s WiFi LED; it should be solid, not flashing.

Incorrect WiFi Password

If the Wireless Setup Wizard fails, you may have entered the wrong password. WiFi passwords are case-sensitive. Re-run the wizard and carefully re-enter the network key. If you are unsure of the password, check the label on your router or log into the router’s admin page.

Weak Wireless Signal

The HL-L2390DW has a modest wireless antenna. If the printer is far from the router or separated by thick walls, the connection may drop frequently. Move the printer closer to the router or use a WiFi extender. Avoid placing the printer near microwaves, cordless phones, or other electronics that can cause interference.

Router Compatibility Issues

Some modern routers broadcast only 5 GHz WiFi or use WPA3 security, which the Brother HL-L2390DW may not support. Log into your router settings and ensure that a 2.4 GHz network is enabled and using WPA2 or WPA/WPA2 mixed mode. You may also need to disable AP isolation, which prevents wireless devices from communicating with each other.

Printer Shows as Offline

If the printer shows as offline on your computer, the IP address may have changed. Most routers assign dynamic IP addresses, which can change when the printer reconnects. To fix this, set a static IP or DHCP reservation for the printer in your router settings, then reinstall the printer using the fixed IP address.

Resetting Network Settings

If nothing else works, you can reset the printer’s network settings to factory defaults. Press and hold the WiFi button on the printer for several seconds until the LEDs flash, then release. This clears saved network information, allowing you to start the setup process fresh.

Tips and Best Practices for Stable Wireless Printing

Once you know how to connect Wifi to Brother Hl L2390dw?, keeping the connection stable is the next priority. Follow these best practices to avoid frequent disconnections and offline errors.

  • Use a static IP address: Reserve an IP address for the printer in your router’s DHCP settings so the address never changes.
  • Keep firmware updated: Periodically check the Brother support website for firmware updates for the HL-L2390DW. Updated firmware can improve wireless stability.
  • Stay on 2.4 GHz: Remember that this printer only supports 2.4 GHz WiFi. Do not attempt to connect it to a 5 GHz-only network.
  • Position the router well: Place your router in a central location, elevated off the floor, and away from large metal objects.
  • Reduce interference: Keep the printer away from microwaves, baby monitors, and Bluetooth devices that operate on the same frequency.
  • Restart regularly: If you notice occasional offline issues, restarting the printer and router once every few weeks can clear temporary glitches.
  • Label your network: If you have multiple networks (guest, IoT, main), make sure the printer joins the correct one where your computers are also connected.

Comparison: WiFi Connection Methods

The table below compares the three main wireless setup methods for the Brother HL-L2390DW so you can choose the one that fits your situation.

Method Ease of Setup Best For Requirements Potential Downsides
WPS Push Button Very Easy Quick setup when router has a WPS button WPS-enabled router, physical access to router Two-minute time window; not all routers support WPS
Wireless Setup Wizard Moderate Connecting to an existing home or office network Network name (SSID) and password Typing password on printer control panel can be slow
WiFi Direct Easy Printing from mobile devices without a router Printer’s WiFi Direct SSID and password Device loses internet access while connected to printer

Frequently Asked Questions

Does the Brother HL-L2390DW support 5 GHz WiFi?

No. The Brother HL-L2390DW supports IEEE 802.11b/g/n, which operates on the 2.4 GHz band only. If your router broadcasts only 5 GHz, the printer will not detect the network. You need a 2.4 GHz network or a mixed-mode router.

How do I find my printer’s IP address?

Print a network configuration page from the printer’s control panel under Menu > Print Reports > Network Configuration. The IP address will be listed on that page. You can also check your router’s admin page for a list of connected devices.

Can I connect the printer without a wireless router?

Yes. You can use WiFi Direct to connect a phone, tablet, or computer directly to the printer. Alternatively, you can connect the printer to a computer via USB, though that removes the wireless sharing benefits.

Why does my Brother HL-L2390DW keep going offline?

Common causes include a dynamic IP address that changed, weak wireless signal, router AP isolation, or the printer losing connection to the network. Setting a static IP and improving signal strength usually resolves this.

How do I reset the network settings on the printer?

Press and hold the WiFi button on the printer until the LEDs flash, then release. This restores network settings to factory defaults. Afterward, you can run the Wireless Setup Wizard or WPS setup again.

Can I print from my phone after connecting to WiFi?

Yes. Once the printer is on your WiFi network, you can use the Brother iPrint&Scan app, Apple AirPrint, or Android printing services to send print jobs from your mobile device.

Conclusion

Learning how to connect Wifi to Brother Hl L2390dw? is straightforward when you break it into manageable steps. Whether you choose WPS Push Button for speed, the Wireless Setup Wizard for control, or WiFi Direct for mobile convenience, the Brother HL-L2390DW gives you flexible options for wireless printing.

After connecting the printer, take time to install the correct drivers, verify the connection with a network configuration page, and apply best practices such as using a static IP and keeping firmware updated. These steps will help ensure that your printer remains reliable and ready to use whenever you need it.

If you run into trouble, refer back to the troubleshooting section or reset the network settings and start over. With a little patience, your Brother HL-L2390DW can become a dependable wireless printing hub for your entire home or office.