How to Connect Ts3722 Printer to Wifi? Easy Printer Connection

Introduction

If you recently purchased a Canon PIXMA TS3722 and want to print from your phone, tablet, or computer without cables, learning How to Connect Ts3722 Printer to Wifi? is the first step. A wireless connection lets you place the printer where it is convenient, share it across multiple devices, and use mobile printing features such as Canon PRINT, AirPrint, and Mopria. This guide explains the complete process in a clear, beginner-friendly way, including preparation, connection methods, verification, troubleshooting, and best practices. By the end, you should be able to connect the TS3722 to your Wi-Fi network and start printing reliably.

Table of Contents

• What You Need Before You Start
• Understanding the TS3722 Wireless Setup
• How to Connect Ts3722 Printer to Wifi?
• Method 1: Connect Using WPS Push Button
• Method 2: Connect Using the Canon PRINT App
• Method 3: Connect Using Standard Wireless Setup
• How to Add the Printer on Windows or Mac After Wi-Fi Setup
• Comparison of Connection Methods
• Troubleshooting Common Connection Problems
• Tips and Best Practices
• Frequently Asked Questions
• Conclusion

What You Need Before You Start

Before you begin, gather a few essentials so the setup process is smooth. You will need the Canon PIXMA TS3722 printer, a power outlet, your Wi-Fi router, the wireless network name, and the Wi-Fi password. Make sure the printer is placed within a reasonable distance of the router during setup, ideally in the same room. A weak signal can interrupt the connection process and cause the printer to fail during registration.

You should also check whether your router supports WPS. WPS, or Wi-Fi Protected Setup, allows devices to join a network by pressing a button instead of typing a password. If your router does not have a WPS button, you can still connect using the Canon PRINT app or a standard wireless setup method. A smartphone or tablet is helpful for app-based setup, while a Windows PC or Mac is useful for installing drivers and adding the printer after it joins the network.

It is also a good idea to update your router firmware if possible and restart the router before setup. Restarting clears temporary network issues and gives the printer a cleaner environment for discovery. If you are connecting the printer at a new location, confirm that the Wi-Fi network is active and that other devices can browse the internet normally.

Understanding the TS3722 Wireless Setup

The TS3722 is designed for home and small-office printing, scanning, and copying. Its wireless feature lets it communicate with devices over your local network. When you ask How to Connect Ts3722 Printer to Wifi?, you are really asking how to make the printer join the same network as your phone or computer and then how to tell your devices where to find it.

Most home printers in this class connect best to a 2.4 GHz Wi-Fi band. Some routers broadcast both 2.4 GHz and 5 GHz under the same network name, which can confuse setup. If your router allows separate names, connect the printer to the 2.4 GHz network. The 2.4 GHz band has longer range and better wall penetration, while 5 GHz is faster but less forgiving for older or compact printer radios.

Security settings also matter. WPA2 or WPA3 with a standard password is usually compatible. Guest networks, captive portals, and networks that require a browser login may not work well with a printer. For best results, connect the TS3722 to your primary home network and avoid complex enterprise authentication.

How to Connect Ts3722 Printer to Wifi?

The easiest answer to How to Connect Ts3722 Printer to Wifi? depends on your router and devices. If your router has a WPS button, WPS push-button setup is usually the fastest. If you prefer guided instructions on your phone, the Canon PRINT Inkjet/SELPHY app is a strong choice. If you need more control or WPS is unavailable, use standard wireless setup through the printer and your computer. All three methods can work; the best one is the one that matches your equipment and comfort level.

Regardless of method, the general flow is the same. First, put the printer into wireless setup mode. Second, connect it to the Wi-Fi network. Third, confirm that the Wi-Fi lamp or status indicator shows a stable connection. Fourth, add the printer to your computer or mobile device. Finally, print a test page to verify everything works.

Method 1: Connect Using WPS Push Button

WPS is often the quickest way to connect the TS3722 because you do not need to type the Wi-Fi password on the printer. This method is ideal when your router has a physical WPS button and both devices are close together.

WPS Step-by-Step Instructions

1. Turn on the printer and wait until it is fully ready.
2. Make sure the printer is not already connected to another network. If it is, reset the network settings first if necessary.
3. Press and hold the Wi-Fi button on the printer until the status lamp begins to flash. On many Canon models, this indicates that the printer is entering wireless setup mode.
4. Release the button and, if prompted by the printer’s button sequence, press the Color button to activate WPS mode. The Wi-Fi lamp should flash in a pattern that indicates it is waiting for the router.
5. Within two minutes, press the WPS button on your router. Do not hold it too long; a brief press is usually enough.
6. Wait while the printer and router negotiate the connection. The Wi-Fi lamp may flash during this process.
7. When the connection is successful, the Wi-Fi lamp should stay lit steadily instead of flashing.
8. Print a network status page or open the Canon app to confirm the printer has received an IP address.

If the lamp continues flashing or turns off, the WPS attempt may have timed out. Repeat the process, making sure you press the router’s WPS button within the allowed window. Also verify that WPS is enabled in your router settings, because some routers disable it by default for security reasons.

Method 2: Connect Using the Canon PRINT App

The Canon PRINT Inkjet/SELPHY app provides guided setup and is especially useful for smartphone and tablet users. It can detect the printer, help you select the correct network, and install the necessary mobile printing profile. This method is a good answer to How to Connect Ts3722 Printer to Wifi? if you want visual instructions and do not want to use WPS.

Canon PRINT App Step-by-Step Instructions

1. Download and install the Canon PRINT Inkjet/SELPHY app from the Apple App Store or Google Play Store.
2. Connect your smartphone or tablet to the same Wi-Fi network you want the printer to use.
3. Turn on the printer and place it near the router.
4. Open the app and tap the option to add a printer or start printer setup.
5. Follow the on-screen prompts. The app may ask you to put the printer into setup mode by pressing and holding the Wi-Fi button.
6. Select your Wi-Fi network from the list when prompted.
7. Enter the Wi-Fi password carefully, paying attention to uppercase letters, numbers, and symbols.
8. Wait for the app to send the network settings to the printer.
9. Confirm the connection status in the app. A successfully connected printer should appear in the device list.
10. Print a test document from the app to confirm mobile printing works.

The app method is helpful because it reduces guesswork. However, it requires your phone and printer to be on the same network during setup. If the app cannot find the printer, temporarily disable mobile data, restart Wi-Fi on your phone, and make sure no VPN is active. A VPN can prevent local device discovery.

Method 3: Connect Using Standard Wireless Setup

Standard wireless setup is useful when WPS is unavailable or when you want to manage the connection from a computer. Depending on your operating system and Canon software, you may use the printer’s built-in setup mode plus Canon’s setup utility or your operating system’s printer settings.

Standard Setup Step-by-Step Instructions

1. Install the latest Canon TS3722 driver or setup software from Canon’s official support website.
2. Turn on the printer and start wireless setup mode using the printer’s button sequence.
3. On your computer, open the Canon setup utility or network setup tool included with the driver package.
4. Choose the option to connect via wireless LAN.
5. Select your Wi-Fi network from the detected list.
6. Enter the Wi-Fi password if requested.
7. Allow the utility to transmit settings to the printer.
8. Wait for confirmation that the printer has joined the network.
9. Complete the driver installation, which may include selecting the printer from the network list.
10. Print a test page from your computer.

If your computer uses a wired Ethernet connection, it can still discover the printer on the same router. The important requirement is that both devices share the same local network. If your router has client isolation enabled, devices may not see each other, so disable that feature temporarily during setup.

How to Add the Printer on Windows or Mac After Wi-Fi Setup

Connecting the TS3722 to Wi-Fi is only part of the process. You also need to add it to each computer that will print. On Windows, open Settings, go to Bluetooth and devices, then Printers and scanners, and choose Add device. Windows may detect the TS3722 automatically. If not, use the Canon driver installer or add it manually by IP address.

On macOS, open System Settings, go to Printers and Scanners, click the add button, and select the TS3722 from the list. macOS may use AirPrint, which often requires no additional driver. For advanced features such as scanning or ink level monitoring, installing Canon’s full software package is recommended.

After adding the printer, print a test page from a simple application such as Notepad or TextEdit. A successful test page confirms that the printer is online, reachable, and ready for normal use. If the test page fails, check the printer queue, confirm the selected printer is the wireless one, and verify that the printer has not gone to sleep.

Comparison of Connection Methods

The table below compares the main ways to answer How to Connect Ts3722 Printer to Wifi?. Use it to choose the method that best fits your setup.

Method	Best For	Requirements	Speed	Difficulty
WPS Push Button	Users with a WPS-enabled router	Router WPS button and printer setup mode	Fast	Easy
Canon PRINT App	Smartphone and tablet users	Compatible phone, app, same Wi-Fi network	Moderate	Easy
Standard Wireless Setup	Users without WPS or needing manual control	Computer, Canon setup utility, Wi-Fi password	Moderate	Moderate
USB-Assisted Setup	Difficult wireless discovery situations	USB cable, Canon software, temporary wired connection	Slower initially	Moderate

For most home users, WPS or the Canon PRINT app is the best starting point. Standard setup is better when you need to choose a specific network or troubleshoot discovery issues. USB-assisted setup is less common but can be useful if wireless discovery is unreliable.

Troubleshooting Common Connection Problems

Even with careful setup, wireless printing can encounter issues. The most common problem is an incorrect Wi-Fi password. Passwords are case-sensitive, and special characters can be mistyped on a phone or computer. Re-enter the password slowly and, if possible, copy it from a secure password manager.

Another common issue is connecting to the wrong band. If your router uses one network name for both 2.4 GHz and 5 GHz, the printer may attempt to join a band it cannot use. Temporarily separate the bands in router settings, connect the printer to 2.4 GHz, and then recombine the names if desired. You can also move the printer closer to the router during setup.

If the printer is not found during discovery, restart the printer, router, and phone or computer. Power cycling often resolves temporary DHCP or discovery problems. Make sure the printer is in setup mode and that its Wi-Fi lamp is flashing. If setup mode times out, restart it.

Firewalls and security software can also block printer discovery. Temporarily disable the firewall or allow Canon software through it. On Windows, ensure network discovery is turned on. On macOS, check that the firewall is not blocking local network access for Canon utilities.

If the printer connects but cannot print, check the IP address. The printer may have joined the network but your computer may be pointing to an old queue. Remove the old printer entry and add it again. Also ensure the printer is not paused, offline, or out of paper. A low ink warning usually does not prevent printing, but an empty cartridge or open cover can.

For persistent failures, reset the printer’s network settings and start over. This removes old network profiles and gives you a clean setup. After resetting, choose one method and follow it completely rather than mixing multiple methods.

Tips and Best Practices

To keep your TS3722 reliably connected, place it in a location with stable Wi-Fi coverage. Avoid placing it behind large metal objects, inside cabinets, or near microwaves and cordless phone bases. These can interfere with the 2.4 GHz signal. If the printer is far from the router, consider a Wi-Fi extender or mesh node, but make sure the printer connects to the main network rather than a guest network.

Keep the printer firmware and Canon software updated. Manufacturers release updates that improve compatibility, security, and wireless stability. Check Canon’s support website periodically or use the Canon PRINT app to see whether updates are available.

Use a clear and memorable printer name if the software allows it. This makes it easier to identify the TS3722 when multiple Canon printers are on the same network. Also print a network configuration page after setup and store it in a safe place. It contains the IP address, MAC address, and network status, which are useful for troubleshooting.

Do not change your Wi-Fi password frequently without updating the printer. If you rename the network or change security settings, the printer will lose its connection and must be set up again. When upgrading routers, use the same network name and password if possible, or plan to reconnect the printer after the change.

Finally, test printing from every device you plan to use. A phone may print through the Canon app, a Mac may use AirPrint, and a Windows PC may use a Canon driver. Testing each path early prevents surprises later.

Frequently Asked Questions

Can I connect the TS3722 to a 5 GHz Wi-Fi network?

In most cases, the TS3722 is intended for 2.4 GHz networks. If your router broadcasts both bands under one name, the printer may fail to connect. Separate the bands or use the 2.4 GHz network name during setup.

Do I need a computer to connect the printer to Wi-Fi?

No. You can use WPS or the Canon PRINT app from a smartphone. A computer is helpful for installing drivers and adding the printer, but it is not required for the wireless connection itself.

Why does the Wi-Fi lamp keep flashing?

A flashing Wi-Fi lamp usually means the printer is in setup mode or attempting to connect. If it flashes for a long time, the connection may have failed. Restart setup, check the password, and ensure the router is within range.

What should I do if WPS does not work?

Some routers disable WPS by default. Enable it in router settings or switch to the Canon PRINT app or standard wireless setup. Also make sure you press the router’s WPS button within the time limit.

How do I reset the TS3722 network settings?

The exact reset sequence can vary by model, so consult the user manual. Generally, you can reset network settings through the printer’s setup menu or a button combination. After resetting, reconnect using one method from this guide.

Can I print from an iPhone without installing an app?

Yes. Once the TS3722 is on the same Wi-Fi network, iPhones and iPads can often print using AirPrint. Select the printer from the print dialog in supported apps.

Why does my computer say the printer is offline?

The printer may be asleep, disconnected, or assigned a new IP address. Wake the printer, check the Wi-Fi lamp, and re-add the printer if necessary. Also ensure the computer is on the same network.

Conclusion

Now you know How to Connect Ts3722 Printer to Wifi? using WPS, the Canon PRINT app, or standard wireless setup. Start by preparing your network and placing the printer near the router. Then choose the method that best matches your equipment. After the printer joins the network, add it to your computer or mobile device and print a test page. If problems occur, check the password, band, signal strength, firewall settings, and printer status. With the right preparation and a methodical approach, the TS3722 can become a convenient wireless printer for your home or small office.