Setup and Configuration

How to Connect the Canon Ts3722 to Wifi? Step-by-Step Setup Instructions

Introduction If you have recently purchased a Canon PIXMA TS3722, one of the first things you will want to do is connect it to your wireless network. Knowing How to Connect the Canon Ts3722 to Wifi? helps you print, scan, and copy from laptops, phones, and tab

HowToFixWiFi

Introduction

If you have recently purchased a Canon PIXMA TS3722, one of the first things you will want to do is connect it to your wireless network. Knowing How to Connect the Canon Ts3722 to Wifi? helps you print, scan, and copy from laptops, phones, and tablets without running cables across your home or office. This guide walks you through every reliable setup method, from WPS push-button pairing to manual SSID selection and app-based configuration. You will also find troubleshooting advice, practical tips, and answers to common questions so you can get your printer online with confidence.

Table of Contents

Before You Begin

Before learning How to Connect the Canon Ts3722 to Wifi?, make sure the printer is unpacked, powered on, and placed within a reasonable distance of your wireless router. A strong signal improves setup success and prevents printing delays later. Remove all packing materials, install the ink cartridges, load paper, and complete the initial printer setup prompts on the LCD screen. If the printer has already been used, you may want to reset its network settings so you are starting from a clean state.

What You Need

  • A Canon PIXMA TS3722 printer with power connected.
  • A wireless router with an active internet connection.
  • Your Wi-Fi network name, also called the SSID.
  • Your Wi-Fi password, also called the network key or passphrase.
  • A smartphone, tablet, or computer if you plan to use app-based or computer-based setup.
  • Access to the router if you plan to use WPS push-button pairing.

Network Requirements

The Canon TS3722 is designed primarily for 2.4 GHz wireless networks. Many modern routers broadcast both 2.4 GHz and 5 GHz bands under one network name, which usually works fine, but some routers separate them. If setup fails because the printer cannot find your network, check whether your router has a dedicated 2.4 GHz SSID and connect to that. Also avoid connecting to guest networks, captive portals, or networks that require browser-based login, because the printer cannot complete those authentication steps. If your router uses MAC address filtering, add the printer’s wireless MAC address before attempting setup.

Choose the Best Connection Method

There is more than one way to connect the Canon TS3722 to Wi-Fi. The best method depends on your router, your comfort level with printer menus, and whether you want to use a phone or computer. WPS is often the fastest when your router supports it. Standard setup gives you the most control. The Canon PRINT app is convenient for mobile-first users. Computer-based setup is useful when you want to install drivers and connect the printer in one workflow.

Method Best For Requires Router Access Difficulty
WPS Push Button Fast setup on WPS-enabled routers Yes Easy
WPS PIN Routers that use PIN pairing Sometimes Easy to Moderate
Standard Wireless Setup Manual control and hidden SSIDs No Moderate
Canon PRINT App Smartphone and tablet users No Easy
Computer Setup Driver installation and desktop printing No Moderate

Method 1: WPS Push Button Setup

WPS push-button setup is one of the simplest answers to How to Connect the Canon Ts3722 to Wifi? because it avoids typing the full password on the printer. This method works only if your router has a physical WPS button or a software WPS option in its admin panel. Keep the printer and router close enough to reach both during pairing.

  1. Make sure the printer is turned on and not in an error state.
  2. Press the Menu button on the printer.
  3. Use the arrow buttons to select Network, then press OK.
  4. Select Wireless LAN setup, then press OK.
  5. Choose WPS (Push button method) and press OK.
  6. When the printer displays a prompt to press the WPS button on the router, go to your router and press its WPS button.
  7. Return to the printer and wait while it searches for and connects to the network.
  8. When the connection succeeds, the Wi-Fi lamp or network status should indicate that the printer is connected.

If the connection fails, move the printer closer to the router, confirm that WPS is enabled in router settings, and try again. Some routers disable WPS by default for security reasons, so you may need to enable it temporarily.

Method 2: WPS PIN Setup

WPS PIN setup is useful when your router requires a PIN instead of a push button. In this method, the printer generates a PIN, and you enter that PIN into your router’s WPS or wireless settings page. The exact router interface varies by brand, but the printer steps are usually similar.

  1. Turn on the printer and press Menu.
  2. Navigate to Network and press OK.
  3. Select Wireless LAN setup and press OK.
  4. Choose WPS (PIN code method) and press OK.
  5. The printer displays an eight-digit PIN.
  6. Open your router’s administration page or WPS setup page on a computer or phone connected to the same network.
  7. Enter the printer’s PIN where requested and confirm.
  8. Wait for the router and printer to complete pairing.

Keep the PIN visible while you enter it, and do not let the printer time out. If it times out, restart the PIN setup process. If your router does not support WPS PIN entry, use standard wireless setup instead.

Method 3: Standard Wireless Setup from the Printer Menu

Standard wireless setup is the most dependable method when WPS is unavailable or when you want to choose a specific SSID. It also works well for hidden networks, although you will need to enter the SSID manually if it is not broadcast. This method requires entering your Wi-Fi password using the printer’s buttons, which can take a little patience.

  1. Turn on the printer.
  2. Press Menu.
  3. Select Network and press OK.
  4. Select Wireless LAN setup and press OK.
  5. Choose Standard setup and press OK.
  6. The printer searches for nearby wireless networks.
  7. Use the arrow buttons to highlight your SSID, then press OK.
  8. If your network is hidden, choose the option to enter the SSID manually and type it carefully.
  9. When prompted, enter your Wi-Fi password.
  10. Use the arrow buttons to select characters, switch case, or delete mistakes as needed.
  11. Press OK to confirm the password.
  12. Wait while the printer connects to the network.
  13. Confirm the connection status on the LCD or printed network settings page.

When entering the password, pay close attention to uppercase and lowercase letters, numbers, and special characters. A single incorrect character is the most common reason standard setup fails. If your password contains symbols that are difficult to enter, consider temporarily changing the Wi-Fi password to a simpler one, completing setup, and then restoring your preferred password.

Method 4: Setup with the Canon PRINT App

The Canon PRINT Inkjet/SELPHY app can guide you through wireless setup from a smartphone or tablet. This is often the easiest option for users who prefer mobile screens over printer button navigation. The app may also help install the printer on your device after the network connection is complete.

  1. Download and install the Canon PRINT Inkjet/SELPHY app from your device’s app store.
  2. Connect your phone or tablet to the same Wi-Fi network you want the printer to use.
  3. Turn on the Canon TS3722.
  4. Open the app and follow the on-screen printer setup instructions.
  5. If prompted, press the Wi-Fi button or use the printer menu to place the printer in setup mode.
  6. Allow the app to detect the printer.
  7. Enter your Wi-Fi password in the app when requested.
  8. Wait for the app to send the network settings to the printer.
  9. Confirm that the printer appears as online in the app.

For best results, keep your mobile device close to the printer during setup. If the app cannot find the printer, make sure mobile data is not interfering, disable VPNs temporarily, and verify that both devices are on the same local network. Some phones switch automatically between Wi-Fi and mobile data; turning off mobile data during setup can prevent detection issues.

Method 5: Connect Using a Computer

If you print mainly from a Windows PC or Mac, you can connect the Canon TS3722 during driver installation. Canon’s setup software may detect the printer over the network or guide you through a temporary USB or wireless connection. This approach is helpful because it installs the full driver package while also configuring the printer.

Windows Setup

  1. Visit Canon’s official support website and download the latest driver or setup package for the PIXMA TS3722.
  2. Run the installer and accept the license agreement.
  3. Choose the wireless connection option when prompted.
  4. Follow the installer instructions to place the printer in setup mode if needed.
  5. Select your SSID from the list or enter it manually.
  6. Enter your Wi-Fi password carefully.
  7. Allow the installer to complete driver and printer port configuration.
  8. Print a test page to confirm the connection.

macOS Setup

  1. Download the recommended Canon driver or setup utility for macOS from Canon’s support site.
  2. Install the software and open it.
  3. Choose wireless setup and follow the prompts.
  4. Place the printer in setup mode if the software requests it.
  5. Select your Wi-Fi network and enter the password.
  6. Wait for the printer to join the network.
  7. Add the printer in macOS System Settings or System Preferences under Printers & Scanners if it is not added automatically.
  8. Print a test page.

On macOS, AirPrint may allow basic printing even without a full driver, but installing Canon’s software gives you access to maintenance tools, scanning features, and advanced settings.

How to Verify the Connection

After setup, do not assume the connection is complete until you verify it. The printer’s LCD, network settings page, and a successful print job are the best confirmation methods. You can also check your router’s connected devices list for the Canon printer.

  • Print a network configuration page from the printer menu if available.
  • Confirm that the printer shows an IP address, such as 192.168.x.x.
  • Check that the SSID matches your home network.
  • Send a print job from a computer or phone.
  • Confirm that the printer responds without cable connections.
  • Check the Canon PRINT app to see whether the printer status is online.

If the printer has an IP address but will not print, the issue may be driver configuration, firewall settings, or the device sending the job. If it has no IP address, the Wi-Fi connection itself is not established.

Troubleshooting Common Wi-Fi Issues

Even when you follow every step correctly, wireless setup can fail due to router settings, signal strength, password errors, or temporary software glitches. The following troubleshooting steps solve most problems without requiring technical support.

Incorrect Password or Typing Errors

The most common issue is an incorrect Wi-Fi password. Passwords are case-sensitive, and special characters can be easy to mistype on the printer’s small display. Re-enter the password slowly, or use the Canon PRINT app or computer setup if typing on the printer is difficult. You can also temporarily simplify the password on your router, complete setup, and then restore the original password.

Router, Band, and Signal Issues

If the printer cannot find your network, make sure the router is broadcasting a 2.4 GHz signal. Move the printer closer to the router during setup. Avoid thick walls, metal cabinets, microwaves, and other sources of interference. Restarting the router can also clear temporary network problems. If your router combines 2.4 GHz and 5 GHz under one SSID, try separating the bands or connecting through a dedicated 2.4 GHz network.

Reset Network Settings

If the printer remembers an old or incorrect network, reset its network settings and start over. The exact menu path may vary slightly by firmware, but it is usually found under the network or device settings menu.

  1. Press Menu on the printer.
  2. Navigate to Network or Device settings.
  3. Select the option to reset network settings.
  4. Confirm the reset.
  5. Wait for the printer to restart or return to the home screen.
  6. Repeat your preferred setup method.

Resetting network settings does not erase print history or ink levels; it only removes saved wireless configuration. After the reset, the printer should behave like a new device during setup.

Firewall and Security Software

Sometimes the printer connects to Wi-Fi but your computer cannot detect it. In that case, check firewall, antivirus, or VPN settings. Temporarily disabling VPNs or allowing Canon software through the firewall may resolve detection issues. Also make sure the computer and printer are on the same local network and not separated by guest network isolation.

Tips and Best Practices

Once you understand How to Connect the Canon Ts3722 to Wifi?, a few habits can keep your wireless printing reliable. Place the printer in a location with good signal, keep firmware and drivers updated, and avoid frequently changing your Wi-Fi password. If you rename your network or replace your router, you will need to reconnect the printer using one of the methods above.

  • Keep the printer within a reasonable distance of the router.
  • Use a stable 2.4 GHz network for best compatibility.
  • Print a network status page after successful setup.
  • Update Canon drivers and the Canon PRINT app regularly.
  • Restart the printer and router if printing becomes intermittent.
  • Use WPS only on trusted home networks.
  • Store your Wi-Fi password in a secure password manager.
  • Check for firmware updates through Canon’s official support tools.

Security is also important. WPS can be convenient, but it may be less secure than manual password entry on some older routers. If you use WPS, disable it after setup if your router allows it. Always use a strong Wi-Fi password and avoid open networks for printer connections.

Frequently Asked Questions

Does the Canon TS3722 support WPS?

Yes, the Canon TS3722 supports WPS push-button and PIN methods when your router also supports WPS. If your router does not have WPS, use standard wireless setup, the Canon PRINT app, or computer-based setup.

Can I connect the Canon TS3722 to a 5 GHz Wi-Fi network?

The TS3722 is designed for 2.4 GHz wireless networks. If your router broadcasts a combined network, it may connect successfully, but a dedicated 5 GHz-only network is not suitable. Use a 2.4 GHz SSID for the most reliable setup.

What if I do not know my Wi-Fi password?

Check the router label, your internet provider’s app, or your router’s administration page. You can also ask the person who set up the network. Without the correct password, standard and app-based setup cannot complete successfully.

Can I connect to a hidden SSID?

Yes, use standard wireless setup and choose the manual SSID entry option. Enter the exact network name and password. Hidden networks require careful typing because the printer cannot auto-detect them.

Can multiple devices use the printer after Wi-Fi setup?

Yes. Once the printer is on the network, multiple computers, phones, and tablets can print to it, provided they are connected to the same network and the printer is installed or discovered on each device.

Will resetting network settings delete my printer data?

No. Resetting network settings removes saved wireless configuration only. It does not delete ink levels, print counts, or basic printer preferences.

Why does my printer show offline after connecting?

The printer may be asleep, on a different network, blocked by a firewall, or assigned a changed IP address. Restart the printer and computer, check the network status, and reinstall or re-add the printer if needed.

Conclusion

Learning How to Connect the Canon Ts3722 to Wifi? is straightforward when you choose the method that matches your setup. WPS push-button pairing is the fastest for compatible routers, standard setup gives you full manual control, the Canon PRINT app is ideal for mobile users, and computer-based setup combines connection with driver installation. Before you begin, gather your SSID and password, place the printer near the router, and use a reliable 2.4 GHz network. If setup fails, reset the network settings, check for typing errors, and verify signal strength. With the steps and troubleshooting tips in this guide, your Canon TS3722 should be ready for wireless printing, scanning, and copying in just a few minutes.