Setup and Configuration

How to Connect Ring Doorbell to New Wifi? Quick Doorbell Network Migration

Introduction A Ring Doorbell is only as useful as its internet connection. When that connection breaks—because you switched internet providers, replaced your router, changed your WiFi password, or moved to a new home—your doorbell stops streaming video, sendin

HowToFixWiFi

Introduction

A Ring Doorbell is only as useful as its internet connection. When that connection breaks—because you switched internet providers, replaced your router, changed your WiFi password, or moved to a new home—your doorbell stops streaming video, sending motion alerts, and answering calls from the Ring app. Knowing How to Connect Ring Doorbell to New Wifi? is an essential skill for any Ring owner, and fortunately, the process is straightforward once you know which steps to follow for your specific model.

This guide walks you through every stage of a Ring Doorbell network migration. You will learn what equipment and information to gather before you begin, how to use the Ring App to switch networks, how to put your doorbell into setup mode, what to do if your doorbell is battery-powered versus hardwired, and how to troubleshoot common connection errors. There is also a comparison table of popular Ring models, a list of best practices, and a FAQ section that answers the most common questions homeowners ask when changing their WiFi.

By the end of this article, you will be able to migrate your Ring Doorbell to a new wireless network with confidence, restore your video feed, and get your home security back online quickly.

Table of Contents

Why You Might Need to Change Your Ring Doorbell WiFi

There are several everyday situations that make it necessary to update your Ring Doorbell’s wireless network. The most common reason is getting a new router. When you replace your old router with a newer model, the network name (SSID) and password often change, even if you try to keep them the same. Your Ring Doorbell will not automatically recognize the new hardware, so you must manually reconnect it.

Another frequent scenario is switching internet service providers. A new ISP usually means a new gateway device and a new WiFi network. Similarly, if you move to a new house or apartment, you will need to set up your Ring Doorbell on the local network at that address. Changing your WiFi password for security reasons also breaks the connection until you update the credentials stored on the device.

Some users change networks to improve performance. If your doorbell is located far from your router, you might add a WiFi extender or mesh system and want to move the doorbell to that extended network for a stronger signal. Others create a separate guest network or a dedicated 2.4 GHz network for smart home devices and need to migrate their Ring Doorbell there to reduce congestion on the main band.

Regardless of the reason, the goal is the same: to get your Ring Doorbell back online so it can record video, detect motion, and notify you when someone presses the button. The following sections explain exactly how to do that.

What You Need Before You Start

Before you attempt to change your Ring Doorbell’s WiFi network, gather the following items. Having everything ready will make the process faster and prevent you from getting stuck halfway through setup.

  • The Ring App installed and logged in: Download the latest version of the Ring App from the Apple App Store or Google Play Store and sign in with the account that owns the doorbell.
  • Your new WiFi network name and password: You need the exact SSID and password for the network you want to use. Double-check capitalization, because WiFi passwords are case-sensitive.
  • A charged smartphone or tablet: Make sure your mobile device is connected to the new WiFi network before you start, or at least has a strong cellular signal if you need to look up information.
  • Physical access to the doorbell: For most models, you will need to press a setup button on the device itself. If the doorbell is mounted high, grab a ladder and a screwdriver.
  • A 2.4 GHz WiFi network: Most Ring Doorbells only support 2.4 GHz wireless networks. If your router only broadcasts a combined 2.4 GHz/5 GHz network under one name, you may need to split them in your router settings temporarily.
  • Power for the doorbell: Battery-powered models should have a decent charge. Hardwired models should be receiving power from your existing doorbell wiring or a Ring transformer.

It is also helpful to know where your doorbell is mounted and whether you can reach it safely. If your doorbell is hardwired and you are unsure about the wiring, turn off power at the breaker before removing the unit, then restore it once the unit is back in place.

Ring Doorbell Models and WiFi Compatibility

Ring has released many doorbell models over the years, and while the general process for changing WiFi is similar, there are small differences in buttons, setup modes, and supported wireless bands. The table below summarizes the most common models so you can identify which one you own and what to expect during migration.

Ring Doorbell Model Power Type WiFi Compatibility Setup Method Best For
Ring Video Doorbell (1st Gen) Battery or hardwired 2.4 GHz only Ring App + orange setup button Basic replacement doorbell
Ring Video Doorbell 2 Battery or hardwired 2.4 GHz only Ring App + orange setup button 1080p video, removable battery
Ring Video Doorbell 3 Battery or hardwired 2.4 GHz only Ring App + setup button Improved motion detection
Ring Video Doorbell 3 Plus Battery or hardwired 2.4 GHz only Ring App + setup button Pre-roll video capture
Ring Video Doorbell 4 Battery or hardwired 2.4 GHz only Ring App + setup button Color pre-roll, quick battery release
Ring Video Doorbell Pro Hardwired only 2.4 GHz and 5 GHz Ring App + side setup button Advanced motion zones, hardwired
Ring Video Doorbell Pro 2 Hardwired only 2.4 GHz and 5 GHz Ring App + side setup button 1536p HD video, Bird’s Eye View
Ring Video Doorbell Elite Hardwired Ethernet Wired Ethernet (no WiFi) Ethernet cable, Ring App Professional installation, no WiFi needed
Ring Battery Doorbell Plus Battery or hardwired 2.4 GHz only Ring App + setup button 1536p HD video, battery-powered

As the table shows, nearly all battery-powered Ring Doorbells work exclusively on 2.4 GHz networks. If your router broadcasts both 2.4 GHz and 5 GHz under a single network name, your doorbell might struggle to connect. In that case, you may need to log into your router and give the 2.4 GHz band its own name before beginning the migration.

How to Connect Ring Doorbell to New Wifi? Using the Ring App

The easiest way to change your Ring Doorbell’s network is through the Ring App. This method works for most models and does not require you to remove the doorbell from its mounting bracket unless the device cannot enter setup mode otherwise.

  1. Open the Ring App on your phone. Make sure you are logged into the account that is associated with the doorbell.
  2. Tap the Menu icon (three horizontal lines) in the top-left corner of the screen.
  3. Tap Devices. You will see a list of all Ring products on your account.
  4. Select your Ring Doorbell from the list. This opens the device dashboard.
  5. Tap Device Health. This section shows your current WiFi network, signal strength (RSSI), battery level, and firmware version.
  6. Look for the “Change WiFi Network” or “Reconnect to WiFi” option. Tap it to begin the network migration process.
  7. Follow the on-screen prompts. The app will ask you to put your doorbell into setup mode if it cannot connect automatically.
  8. Select your new WiFi network from the list of available networks.
  9. Enter the WiFi password carefully. Remember that it is case-sensitive.
  10. Wait for the doorbell to connect. The app will show a progress indicator and then confirm that the device is online.
  11. Test the connection. Press the doorbell button or trigger a motion event to verify that you receive a notification and can view the live video feed.

If the app does not show a “Change WiFi Network” option, your doorbell may need to be set up as a new device. In that case, remove the doorbell from the app by tapping Device Settings, then Remove This Device, and add it again using the setup mode method described below.

How to Connect Ring Doorbell to New Wifi? Using Setup Mode

Sometimes the Ring App cannot change the network remotely, especially if the doorbell is completely offline or if you are setting it up for the first time on a new network. In those situations, you need to put the doorbell into setup mode so it can communicate directly with your phone.

  1. Locate the setup button on your Ring Doorbell. On battery-powered models, this is usually an orange button on the back or under the faceplate. On hardwired Pro models, it is a small button on the side of the unit.
  2. Press and release the setup button. The doorbell should enter setup mode, indicated by a spinning white light or a specific pattern on the front LED ring.
  3. Open the Ring App and tap Set Up a Device. Select Doorbells and then choose your specific model from the list.
  4. Scan the QR code or MAC ID barcode on the back of the doorbell or on the product packaging if prompted.
  5. Put your phone on the temporary Ring network. The app may instruct you to join a WiFi network named something like Ring-XXXX. Do this through your phone’s WiFi settings, then return to the Ring App.
  6. Select your new home WiFi network from the list displayed in the app.
  7. Enter the password for your new network. Double-check for typos before submitting.
  8. Wait for the doorbell to connect to your network. The app will confirm when the connection is successful.
  9. Name your doorbell and assign it to a location if you are adding it as a new device.
  10. Test the doorbell by pressing the button and checking for a live video feed in the app.

If you are replacing the network on an existing device, you do not need to scan the QR code again unless the app asks for it. Simply entering setup mode and choosing the new network is usually enough.

Battery-Powered vs. Hardwired Ring Doorbells

The process for connecting to new WiFi is mostly the same whether your Ring Doorbell is battery-powered or hardwired, but there are a few practical differences worth noting.

Battery-powered models (such as the Ring Video Doorbell 2, 3, 3 Plus, 4, and Battery Doorbell Plus) rely on an internal rechargeable battery. Before starting the WiFi migration, check the battery level in the Device Health section of the Ring App. If the battery is low, charge it fully using the included USB cable. A low battery can cause the doorbell to drop offline during setup, forcing you to start over. These models only support 2.4 GHz WiFi.

Hardwired models (such as the Ring Video Doorbell Pro and Pro 2) connect to your existing doorbell wiring and do not have a removable battery. They support both 2.4 GHz and 5 GHz networks, which gives you more flexibility. However, if your home’s doorbell transformer is not providing enough voltage, the doorbell may reboot or disconnect during setup. Use the Device Health page to check the voltage reading before and after changing the network.

If you own a Ring Video Doorbell Elite, it does not use WiFi at all. It connects via Ethernet cable, so there is no wireless network to migrate. If your Elite loses connectivity, check the Ethernet cable and network switch instead.

Troubleshooting Common Connection Issues

Even when you follow the steps correctly, you might run into problems. Below are the most common issues and how to fix them.

Doorbell Not Found During Setup

If the Ring App cannot find your doorbell, make sure the device is actually in setup mode. Press the setup button firmly and wait for the light pattern to change. Move your phone closer to the doorbell during setup, and turn off cellular data on your phone so it does not interfere with the temporary Ring network.

Wrong WiFi Password

A single typo will prevent the doorbell from connecting. If you are unsure of the password, connect another device—like a laptop or tablet—to the new network first to confirm the credentials work. Then enter the exact same password in the Ring App.

5 GHz Network Not Showing Up

Most Ring Doorbells do not support 5 GHz WiFi. If your router only broadcasts a 5 GHz network or uses a single name for both bands, the doorbell may not see the network at all. Log into your router’s admin panel and create a separate 2.4 GHz SSID, or disable band steering temporarily so the doorbell can connect to the 2.4 GHz band.

Weak WiFi Signal

Check the RSSI value in Device Health. An RSSI between -40 and -60 is strong. Anything weaker than -70 may cause video delays or disconnections. Move your router closer to the doorbell, remove obstructions, or install a Ring Chime Pro or WiFi extender near the doorbell to boost the signal.

VPN or Proxy Interference

If your phone has a VPN enabled, the Ring App may have trouble communicating with the doorbell during setup. Turn off any VPN or proxy services on your phone before starting the migration.

Doorbell Goes Offline After Changing Networks

If the doorbell connects but then drops offline, power-cycle your router by unplugging it for 30 seconds and plugging it back in. Then restart the doorbell by pressing the setup button or temporarily removing power. Check for firmware updates in the Ring App and install any that are available.

How to Remove the Old WiFi Network from Your Ring Doorbell

Ring Doorbells generally store only one WiFi network at a time. When you successfully connect the doorbell to a new network, the old credentials are automatically replaced. You do not need to manually delete the old network in most cases.

However, if the doorbell keeps trying to connect to the old network and fails, you may need to remove the device from your Ring App and set it up again as new. To do this, open the app, select the doorbell, go to Device Settings, choose General Settings, and tap Remove This Device. Then put the doorbell into setup mode and add it back using the new WiFi credentials.

This clean-slate approach is especially useful if you moved to a new home and the old network no longer exists. It ensures there are no stale network settings causing conflicts.

Tips and Best Practices for Ring Doorbell WiFi

To keep your Ring Doorbell connected reliably after the migration, follow these best practices.

  • Use a dedicated 2.4 GHz network for smart home devices if your router supports separate band names. This prevents the doorbell from accidentally trying to connect to 5 GHz.
  • Keep your router firmware updated. Router updates often improve compatibility with IoT devices like Ring Doorbells.
  • Mount your router in a central location and avoid placing it inside a cabinet or behind large metal objects.
  • Check RSSI regularly in the Device Health section. If the signal weakens over time, something may have changed in your home, such as new furniture or a new appliance causing interference.
  • Use a WiFi extender like the Ring Chime Pro if your doorbell is more than 30 feet from the router or separated by thick walls.
  • Do not hide your SSID. Hidden networks make it harder for the Ring Doorbell to connect and reconnect after a power outage.
  • Keep the Ring App updated. New versions of the app fix bugs related to WiFi setup and device connectivity.
  • Write down your new WiFi password and store it somewhere safe. You will need it again if you ever reset the doorbell or add another Ring device.
  • Test motion zones and video quality after the migration to ensure the new network can handle the upload bandwidth required for live view and recordings.

Frequently Asked Questions

Can Ring Doorbell connect to 5 GHz WiFi?

Most Ring Doorbells, including all battery-powered models, support only 2.4 GHz WiFi. The Ring Video Doorbell Pro and Pro 2 are exceptions and support both 2.4 GHz and 5 GHz. If you are unsure which model you have, check the Device Health screen or look at the model number on the back of the unit.

How do I put my Ring Doorbell in setup mode?

Press the setup button on the doorbell. On battery models, this is typically an orange button under the faceplate or on the back. On Pro models, it is a small button on the side. The front light will begin to spin or flash, indicating that the device is ready to connect to a new network.

Will changing WiFi delete my recorded videos?

No. Changing your WiFi network does not delete videos stored in the cloud. Your recordings are tied to your Ring account, not to a specific WiFi network. As long as you log into the same account, your video history remains available.

How long does it take to connect Ring Doorbell to new WiFi?

The process usually takes five to fifteen minutes. Most of that time is spent gathering your network credentials and walking through the app prompts. The actual connection happens in under a minute once you enter the correct password.

Do I need to reset my Ring Doorbell to change WiFi?

Not usually. You can change the network through the Ring App without a full factory reset. A reset is only necessary if the doorbell is unresponsive, if you cannot access the app, or if you are giving the doorbell to someone else.

What if I forgot my WiFi password?

Look for the password on a sticker on your router, or log into your router’s admin panel using a computer that is already connected to the network. From there, you can view or reset the WiFi password.

Can I connect multiple Ring devices to the same new network?

Yes. You can connect as many Ring devices as your router can handle. Repeat the setup process for each doorbell, camera, or chime, selecting the same new WiFi network for every device.

Why does my Ring Doorbell keep disconnecting?

Frequent disconnections are usually caused by a weak WiFi signal, interference from other electronics, low battery voltage, or router settings that block IoT devices. Check the RSSI in Device Health, move the router closer, or use a WiFi extender to stabilize the connection.

Conclusion

Changing the WiFi network on your Ring Doorbell does not have to be complicated. Whether you are using the Ring App’s built-in network change feature or putting the doorbell into setup mode manually, the steps are straightforward as long as you have your new network name and password ready. Remember that most Ring Doorbells work only on 2.4 GHz networks, so check your router settings if the new network does not appear during setup.

By following the instructions in this guide, you now know How to Connect Ring Doorbell to New Wifi? quickly and safely. You also have the tools to troubleshoot common problems, remove old network credentials, and keep your doorbell online with best practices for signal strength and router placement. Once your Ring Doorbell is back on the network, you can resume monitoring your front door, receiving motion alerts, and enjoying the peace of mind that comes with a connected home security system.