
How to Connect Hp M140w to Wifi? Wi-Fi Direct Tips
Introduction The HP LaserJet M140w is a compact monochrome laser printer that is widely used for home offices, small businesses, and personal setups due to its small footprint and reliable printing. While it is designed to be simple to use, many users run into
Introduction
The HP LaserJet M140w is a compact monochrome laser printer that is widely used for home offices, small businesses, and personal setups due to its small footprint and reliable printing. While it is designed to be simple to use, many users run into confusion when trying to figure out How to Connect Hp M140w to Wifi? for the first time. Since this printer relies heavily on wireless connectivity for printing from laptops, smartphones, and tablets, getting the network setup right is the key to avoiding constant disconnection issues later on.
Unlike some older printers that only worked over USB, the M140w is built with wireless printing in mind. It supports standard Wi-Fi as well as Wi-Fi Direct, giving you more than one way to print depending on your setup. Whether you want your entire household to share one printer over your home router, or you want to print directly from a device without connecting to any router at all, understanding both options will save you a lot of time.
This guide will walk you through everything step by step. From checking requirements, to using different connection methods, to troubleshooting common errors, to useful Wi-Fi Direct tips, you will find all of the information needed to get your HP M140w connected and working as expected.
Table of Contents
- 1. Understanding HP M140w Connectivity Options
- 2. Prerequisites Before You Begin
- 3. Method 1: Using the HP Smart App to Connect to a Wi-Fi Network
- 4. Method 2: Using WPS Push Button to Connect to Wi-Fi
- 5. Method 3: Using WPS PIN Method (Where Available)
- 6. Understanding Wi-Fi Direct for the HP M140w
- 7. Method 4: Connecting to HP M140w Using Wi-Fi Direct
- 8. Printing After Connecting Your HP M140w
- 9. Wi-Fi Direct Tips That Actually Help
- 10. Comparison: Router Wi-Fi vs Wi-Fi Direct
- 11. Troubleshooting Common Issues
- 12. Network Best Practices For Long Term Stability
- 13. Frequently Asked Questions
- 14. Conclusion
1. Understanding HP M140w Connectivity Options
Before going through the steps for How to Connect Hp M140w to Wifi?, it is important to know the two main ways this printer can go online for printing.
1.1 Network Wi-Fi (Infrastructure Mode)
In this mode, the HP M140w connects directly to your existing wireless router. Once connected, any device that is also connected to the same router can discover and print to this printer. This is the most convenient option for shared use across multiple users and devices.
1.2 Wi-Fi Direct (Peer-to-Peer Mode)
Wi-Fi Direct allows your phone, tablet, or laptop to connect directly to the printer without using a router. The printer creates its own temporary wireless network. This is extremely useful if you are in a place with no internet, if your router is down, or if you only need to print from one device at a time.
Both methods are supported by the M140w, and knowing when to use each one will help you avoid unnecessary setup issues.
2. Prerequisites Before You Begin
To avoid failed attempts while learning How to Connect Hp M140w to Wifi?, gather the following items first:
- Wi-Fi details: Have your wireless network name and password ready if you plan to use your router.
- Compatible device: A Windows, macOS, Android, or iOS device to complete the setup.
- Power source: Plug the HP M140w into a stable power outlet and power it on.
- Network range: Keep your printer within a reasonable distance from your Wi-Fi router for the initial setup.
- Latest HP Smart app: Download the HP Smart app on your phone or computer from its official source for the smoothest guided setup.
It is also a good idea to temporarily disable any active VPN on the device you are using for setup, as VPNs can sometimes interfere with printer discovery.
3. Method 1: Using the HP Smart App to Connect to a Wi-Fi Network
This is the most recommended method for most users. The HP Smart app guides you through the process with on-screen prompts and works well for first-time wireless setup.
3.1 Prepare the printer
- Turn on your HP LaserJet M140w.
- Make sure there are no active USB cables connected to the printer at this time.
- Wait for the printer to fully boot up before moving to the next step.
3.2 Use HP Smart for network connection
- Open the HP Smart app on your computer or mobile device.
- Select the option to add a new printer.
- The app will begin searching for nearby HP printers.
- When your HP M140w appears in the list, select it.
- If prompted, choose the option to connect it to your Wi-Fi network.
- Select your home network name from the list and enter your Wi-Fi password when asked.
- Allow the app and printer a minute or two to complete the connection.
3.3 Verify the connection
Once the app confirms success, your printer is now on the same network as your device. You can print a test page directly from the HP Smart app to be sure everything is working.
4. Method 2: Using WPS Push Button to Connect to Wi-Fi
If your wireless router has a physical WPS button, this is a quick way to connect your printer without manually typing your Wi-Fi password. This method is very handy if you want to skip entering long credentials.
4.1 Check router compatibility
Look at your router and confirm it has a clearly labeled WPS button. Not all routers support this feature, but many home routers still do.
4.2 Start WPS from the router side
- With the HP M140w powered on, get within range of your router.
- Press and hold the WPS button on your router for a couple of seconds. On most routers, the WPS indicator will start blinking to show it is in discovery mode.
- Within two minutes of pressing the router WPS button, initiate the WPS connection on the printer. Depending on the exact state of your M140w, this is usually triggered by using HP Smart and selecting the WPS push button option, or by following the app’s prompt.
4.3 Wait for pairing
The printer and router will now negotiate and connect automatically. Once connected, the network indicator behavior will settle. You can confirm from the HP Smart app that the printer is now available on your Wi-Fi network.
5. Method 3: Using WPS PIN Method (Where Available)
Some routers prefer the WPS PIN method over the push button. With this approach, the printer generates a PIN and you enter that PIN into your router’s WPS settings page from another device.
5.1 Generate the PIN
- Use the HP Smart app and select your M140w during setup.
- When given wireless connection options, choose WPS PIN if present.
- The app will display an 8-digit PIN code for this connection attempt.
5.2 Enter the PIN on your router
- Open a browser on a device already connected to your router.
- Log into your router’s configuration page using its admin address and login details.
- Go to the WPS section and look for the option to add a device using a PIN.
- Enter the exact 8-digit PIN shown by HP Smart.
- Apply and wait for the router to register the printer.
After a short while, the HP M140w should connect to your Wi-Fi network. This method is less common for everyday users, but it is useful if the physical WPS button is missing or unresponsive.
6. Understanding Wi-Fi Direct for the HP M140w
Wi-Fi Direct is one of the most practical features of the M140w. It completely bypasses your router. Instead, the printer acts as a wireless access point. Your device connects straight to that printer network and prints without internet access or without joining your home Wi-Fi.
There are a few key things to know about Wi-Fi Direct:
- Separate network: When active, the printer broadcasts its own Wi-Fi Direct network name.
- No router needed: Ideal for travel, guest setups, or when troubleshooting router issues.
- Limited multi-device sharing: Depending on usage, direct connections work best for one or a couple of devices at a time.
- Still needs the right app: To print reliably, using the HP Smart app is strongly advised while on Wi-Fi Direct.
If you ever find yourself stuck trying to figure out How to Connect Hp M140w to Wifi? due to router restrictions, Wi-Fi Direct is your backup plan.
7. Method 4: Connecting to HP M140w Using Wi-Fi Direct
Connecting over Wi-Fi Direct is straightforward once you know where to look for the network details.
7.1 Find Wi-Fi Direct details
- Turn on your HP M140w.
- On many setups, Wi-Fi Direct is available by default. The Wi-Fi Direct name and password can often be found in printer information, or you can view them through the HP Smart app while the printer is powered on.
- Look for a network name that resembles something like the printer model or a unique name assigned to your unit.
7.2 Connect your device directly
- On your smartphone, tablet, or laptop, go to your Wi-Fi settings.
- Scan for available wireless networks.
- Select the Wi-Fi Direct network belonging to your HP M140w.
- Enter the Wi-Fi Direct password when prompted.
- Once connected, open the HP Smart app. It should detect the printer over this direct connection.
7.3 Start printing
With your device connected directly to the printer, you can now print from any supported app. Keep in mind that while connected to Wi-Fi Direct, your device will likely lose access to your regular internet connection unless your device supports using both networks at the same time, which is not available on many phones and laptops.
8. Printing After Connecting Your HP M140w
After completing any of the above methods, you should be able to print without repeating the full setup. Here is how to approach printing from different devices.
8.1 From a Windows PC
After network setup, Windows should automatically discover the HP M140w if both are on the same Wi-Fi network. If not, open Settings, go to printers and scanners, and add the printer manually by searching. The HP Smart app can also handle adding it with minimal effort.
8.2 From a macOS device
Open System Settings, go to printers and scanners, and add a printer. Your M140w should appear on the list if it is on the same network. Using HP Smart is also a reliable route on macOS.
8.3 From Android and iOS
The easiest way is through the HP Smart app. You can also use the print option from many built-in apps, which will show the printer once discovered over the same network or over Wi-Fi Direct.
9. Wi-Fi Direct Tips That Actually Help
Wi-Fi Direct is convenient, but a few small adjustments can make it far more reliable. These are practical Wi-Fi Direct tips that apply directly to the HP M140w.
9.1 Keep distance minimal
Since there is no router acting as a repeater, the range of Wi-Fi Direct is shorter than your normal network. Keep your device within a few meters of the printer for stable printing.
9.2 Use HP Smart while connected
For the smoothest experience, always use the HP Smart app when printing over Wi-Fi Direct. Some third-party print dialogs can struggle to discover the printer in peer-to-peer mode.
9.3 Reconnect intentionally
If you switch back and forth between your home Wi-Fi and Wi-Fi Direct often, your device can get confused about which network to use. Manually switching in Wi-Fi settings is often more reliable than letting it auto-join.
9.4 Only use it when needed
For everyday use, router-based Wi-Fi is almost always better. It allows sharing, better range, and keeps your internet connection active at the same time on most devices.
9.5 Note the password
If you plan to use Wi-Fi Direct on multiple occasions, keep the Wi-Fi Direct network name and password noted somewhere safe. This avoids having to hunt for them each time.
10. Comparison: Router Wi-Fi vs Wi-Fi Direct
To help you decide which path to take when figuring out How to Connect Hp M140w to Wifi?, use this comparison as a quick reference.
| Feature | Router Wi-Fi (Infrastructure) | Wi-Fi Direct (Peer-to-Peer) |
|---|---|---|
| Needs a router | Yes | No |
| Multiple users can print | Yes, anyone on the same network | Usually limited, best for one active device |
| Internet access while printing | Yes, stays connected to the internet | Often lost on phones/laptops while connected to the printer |
| Range | Better, depends on router coverage | Shorter, closer to printer required |
| Setup for first time | Slightly longer with network selection | Very fast once you know the network name |
| Best use case | Home or office with shared printing | On-the-go, no router, or quick emergency printing |
11. Troubleshooting Common Issues
Even with the correct steps, a few issues can pop up. Work through these in order to get your HP M140w back online.
11.1 Printer not found during setup
- Proximity: Move the printer and device closer to each other or closer to the router.
- USB check: Ensure no USB cable is plugged in, as it can block wireless discovery.
- Restart: Power off the printer, router, and setup device for about 30 seconds, then power back on.
- Network band: If your router uses both 2.4GHz and 5GHz with very different names, try connecting the setup device to the 2.4GHz network. The M140w is most reliably used on 2.4GHz for initial setup.
11.2 Connected but not printing
- Same network: Confirm the printing device and HP M140w are on the exact same Wi-Fi network. If one is on Wi-Fi Direct and the other is still on home Wi-Fi, they will not see each other.
- Default printer: On Windows or macOS, make sure the M140w is set as the default printer.
- Queue stuck: Clear any stuck print jobs from the print queue and try again.
- Re-add printer: Remove and re-add the printer through HP Smart or your system settings.
11.3 Wi-Fi keeps dropping
- Signal strength: Thick walls, microwaves, and large distances can weaken the signal. Try relocating the printer closer to the router.
- Channel congestion: In dense apartment buildings, nearby networks can interfere. If possible, try switching your router to a less crowded 2.4GHz channel from its settings.
- Power saving interference: Avoid placing the printer in a location where it may be disconnected from power frequently.
- Router reboot: A simple router restart can resolve many temporary connection drops.
11.4 Wi-Fi Direct fails to connect
- Forget old network: If your device has connected to that Wi-Fi Direct network before with incorrect details, forget it and reconnect fresh.
- Use correct password: Double check the Wi-Fi Direct password exactly as shown.
- Disable mobile data conflict: On some phones, mobile data can interfere. Try with mobile data temporarily disabled while setting up over Wi-Fi Direct.
- Close HP Smart and retry: Force close the app, reconnect to the direct network, and reopen HP Smart.
12. Network Best Practices For Long Term Stability
Getting connected is only half the job. Following these practices will help your HP M140w stay connected for months without needing to redo the setup.
- Stick to 2.4GHz when possible: For laser printers like the M140w, the 2.4GHz band offers better range and wall penetration than 5GHz, which is ideal for most home layouts.
- Keep firmware-aware updates: Use the HP Smart app periodically to check for any available printer updates. Updates can improve wireless stability.
- Use a fixed spot: Avoid moving the printer between rooms often. Consistent placement reduces reconnection attempts.
- Limit router changes: Changing your router name or password will require reconnecting the printer. If you must change them, use HP Smart to reconnect it to the new network.
- Reduce network overload: While not always possible, extremely overcrowded networks can cause discovery delays. This is rare, but more common in very large shared networks.
13. Frequently Asked Questions
Q1: Can I use the HP M140w without any Wi-Fi network?
Yes. You can use Wi-Fi Direct to connect your device directly to the printer and print without a router or internet connection. This is perfect for offline printing.
Q2: Why does my phone lose internet when I connect to Wi-Fi Direct?
This is normal for most mobile devices. When you connect to a peer-to-peer network like Wi-Fi Direct, your phone prioritizes that connection. Unless your device supports dual Wi-Fi connections, your regular internet access will be unavailable until you switch back to your home Wi-Fi.
Q3: What is the easiest way for How to Connect Hp M140w to Wifi? as a complete beginner?
The HP Smart app with your router Wi-Fi is the easiest and most forgiving approach. It walks you through each step, finds the printer, and handles most of the technical details for you.
Q4: Will WPS work if my router has WPS but it is hidden in settings?
In most cases, the physical button is the one that matters. If your router’s menu hides WPS or it has been disabled by default, try the physical WPS push button first. If neither works, use the HP Smart app method with manual network selection instead.
Q5: Can I switch from Wi-Fi Direct back to router Wi-Fi later?
Yes. Using the HP Smart app, you can reconnect the printer to your home Wi-Fi network at any time. After that, your devices can print over the router as long as they are on the same network.
Q6: Does the HP M140w support 5GHz Wi-Fi?
The M140w is primarily designed to work best with 2.4GHz wireless networks. Some routers combine both bands under one name, which can cause confusion during setup. If discovery fails, try connecting your setup device to the separate 2.4GHz network manually.
Q7: Do I need internet to complete the wireless setup?
For router-based Wi-Fi, you do not need an active internet connection for the printer to join your local network. You just need the router to be powered on and broadcasting. For the HP Smart app, initial download requires internet, but the actual printer-to-router pairing does not strictly require internet access once the app is installed.
14. Conclusion
Connecting the HP M140w wirelessly does not have to be complicated. As covered throughout this guide, the answer to How to Connect Hp M140w to Wifi? depends entirely on your situation. If you want shared printing across multiple devices, connecting to your home router through the HP Smart app or WPS is the right choice. If you need a quick, offline solution, Wi-Fi Direct is more than capable.
The key is to start simple. For most users, Method 1 using the HP Smart app will get the job done with the least amount of guesswork. Keep your printer close to the router during setup, use the 2.4GHz band where possible, and stick to router Wi-Fi for long-term everyday use.
With the Wi-Fi Direct tips, comparison chart, and troubleshooting advice above, you now have a complete roadmap to get your HP M140w connected, stay connected, and print with minimal hassle going forward.