HowToFixWiFiSimple fixes  •  Better connection
Setup and Configuration

How to Connect Canon Ts3322 Printer to Wifi? Ink Alert Steps

Introduction If you have just unboxed a Canon PIXMA TS3322 or you are trying to get your existing printer back online, one of the first questions you will ask is How to Connect Canon Ts3322 Printer to Wifi?. This compact, budget-friendly inkjet printer is desi

HowToFixWiFi

Introduction

If you have just unboxed a Canon PIXMA TS3322 or you are trying to get your existing printer back online, one of the first questions you will ask is How to Connect Canon Ts3322 Printer to Wifi?. This compact, budget-friendly inkjet printer is designed for home and small-office use, and once it is connected to your wireless network, you can print from laptops, smartphones, and tablets without a single cable. In this guide, we walk you through every reliable method of connecting the Canon TS3322 to Wi-Fi, explain what the ink alert messages mean, and show you the exact steps to check, reset, and manage ink levels so you never get caught off guard mid-print.

We also cover troubleshooting for the most common connection errors, compare the different setup methods side by side, and answer the questions users ask most often. By the end, you will know not only How to Connect Canon Ts3322 Printer to Wifi? but also how to keep the printer running smoothly for months to come.

Table of Contents

What Is the Canon TS3322 Printer?

The Canon PIXMA TS3322 is an all-in-one inkjet printer that prints, copies, and scans. It uses a two-cartridge system (one black, one color) and supports wireless printing over a 2.4 GHz Wi-Fi network. It does not have an Ethernet port or a touchscreen, so all network setup is done either through the physical buttons on the front panel or through the Canon PRINT app on your phone. Because the panel is minimal, knowing the exact button sequence matters a lot, which is why so many users search for How to Connect Canon Ts3322 Printer to Wifi? before their first print.

The printer is aimed at students, families, and light home-office users. Its low upfront cost makes it attractive, but like most entry-level inkjets, it relies on genuine or compatible cartridges and will warn you aggressively when ink runs low.

Before You Begin: What You Need

Before attempting any wireless setup, gather the following items so you do not have to stop midway:

  • A working 2.4 GHz Wi-Fi network (the TS3322 does not support 5 GHz).
  • Your Wi-Fi network name (SSID) and password.
  • The Canon TS3322 powered on and in standby mode.
  • A smartphone with the Canon PRINT Inkjet/SELPHY app installed, or a computer with Canon’s setup software.
  • A USB cable (optional, only for the manual fallback method).

Make sure the printer is placed within reasonable range of your router. Thick walls and metal cabinets can weaken the signal and cause intermittent disconnections.

How to Connect Canon Ts3322 Printer to Wifi?

There are three reliable ways to answer How to Connect Canon Ts3322 Printer to Wifi?: the WPS push-button method, the Canon PRINT app method, and the manual panel method. Choose the one that matches your router and comfort level. All three result in the printer joining your wireless network and being discoverable by your devices.

Method 1: WPS Push Button Connection

WPS (Wi-Fi Protected Setup) is the fastest option if your router has a WPS button. Follow these steps:

  1. Make sure the printer is turned on and idle.
  2. Press and hold the Wi-Fi button on the printer until the power lamp flashes blue.
  3. Within two minutes, press the WPS button on your router.
  4. Wait while the blue Wi-Fi lamp flashes. When it stops flashing and stays solid, the connection is complete.
  5. Print a network configuration page to confirm the IP address.

If the lamp keeps flashing for more than two minutes, the pairing failed. Restart both devices and try again, making sure no other WPS session is running.

Method 2: Canon PRINT Inkjet/SELPHY App

The app method is the most user-friendly and is recommended for first-time setup. Here is the exact process:

  1. Download and install the Canon PRINT Inkjet/SELPHY app from the App Store or Google Play.
  2. Open the app and tap Add Printer, then choose Register Printer.
  3. Select Wireless LAN Connection and follow the on-screen prompts.
  4. When prompted, press and hold the printer’s Wi-Fi button until the lamp flashes.
  5. Temporarily connect your phone to the printer’s temporary access point if the app instructs you to.
  6. Enter your home Wi-Fi SSID and password in the app.
  7. Wait for the app to confirm that the printer has joined your network.

Once registered, the printer appears in the app and you can print, scan, and check ink levels directly from your phone.

Method 3: Manual Wireless Setup From the Printer Panel

If WPS is unavailable and you prefer not to use the app, you can configure the network manually using the printer’s buttons:

  1. Press and hold the Wi-Fi button until the power lamp flashes.
  2. Press the Color button (or follow the button sequence in your manual) to enter setup mode.
  3. Use the router’s WPS or enter the SSID by printing a network list and selecting your network.
  4. Enter the Wi-Fi password using the on-screen or button-driven input method.
  5. Confirm and wait for the Wi-Fi lamp to turn solid.

Because the TS3322 has no display, manual entry can be tedious. The app method is generally faster and less error-prone.

Connecting From Windows or Mac

After the printer is on Wi-Fi, your computer still needs a driver and a queue entry. On Windows, open Settings > Bluetooth & devices > Printers & scanners, click Add device, and select the Canon TS3322 when it appears. On Mac, go to System Settings > Printers & Scanners, click the plus icon, and choose the printer from the list. macOS usually auto-downloads the driver; on Windows you may need to install Canon’s full driver package for scanning features.

If the printer does not appear, ensure your computer and printer are on the same network and that no VPN is blocking local discovery.

Troubleshooting Wi-Fi Connection Issues

Even after following the steps, you may hit a snag. Here are the most common problems and fixes:

  • Printer not found: Restart the router and printer, then retry. Confirm both are on the same band (2.4 GHz).
  • Wrong password: Re-enter the Wi-Fi password carefully; the TS3322 is case-sensitive.
  • IP conflict: Power-cycle the printer to obtain a fresh DHCP address.
  • Weak signal: Move the printer closer to the router or reduce interference from microwaves and cordless phones.
  • App cannot detect printer: Disable mobile data temporarily so the phone stays on Wi-Fi.

If all else fails, perform a network reset on the printer by holding the Wi-Fi button for the specified duration until the lamp blinks in a reset pattern, then start fresh.

Ink Alert Steps for Canon TS3322

Once printing works, the next recurring issue is the ink alert. Canon printers are known for warning early, and the TS3322 is no exception. Understanding these alerts prevents wasted trips to the store and avoids unnecessary cartridge replacements.

Understanding the Ink Alert Messages

The TS3322 communicates ink status through the Canon PRINT app and through blinking lamps on the printer. Common alerts include:

  • Low ink: One cartridge is running low but printing can continue.
  • Ink empty: The cartridge is depleted; printing may be blocked until replaced or acknowledged.
  • Cartridge not recognized: The printer cannot read the chip, often with third-party cartridges.
  • Wrong cartridge: An incompatible cartridge has been installed.

These alerts are designed to protect print quality, but they sometimes trigger prematurely, especially with refilled or compatible cartridges.

How to Check Ink Levels

To check ink levels accurately, use one of these methods:

  1. Open the Canon PRINT app, select your printer, and view the ink level graphic on the home screen.
  2. On Windows, open Devices and Printers, right-click the TS3322, choose Printing Preferences, and open the Maintenance tab to see estimated ink levels.
  3. On Mac, open System Settings > Printers & Scanners, select the printer, and click Options & Supplies to view ink information.

Note that ink levels are estimates based on page count and droplet usage, not a direct measurement of remaining fluid.

How to Reset or Clear Ink Alerts

If you have replaced a cartridge or you are using a compatible cartridge that the printer refuses to accept, you may need to clear the alert. Follow these careful steps:

  1. Open the printer cover and remove the cartridge that triggered the alert.
  2. Press and hold the Stop/Reset button on the printer for about five seconds until the alert lamp stops blinking.
  3. Reinstall the cartridge firmly until it clicks.
  4. Close the cover and wait for the printer to initialize.
  5. If the alert persists, remove the cartridge again, clean the chip contacts with a lint-free cloth, and reinstall.

Be cautious: resetting alerts on an actually empty cartridge can damage the print head. Only reset when you are confident ink remains or you have installed a new cartridge.

Comparison of Connection Methods

Method Speed Difficulty Best For
WPS Push Button Fast (under 1 minute) Easy Users whose router has a WPS button
Canon PRINT App Medium (3-5 minutes) Easy First-time setup and mobile printing
Manual Panel Setup Slow (5-10 minutes) Moderate Users without WPS or app access

Tips and Best Practices

To get the most from your Canon TS3322 after learning How to Connect Canon Ts3322 Printer to Wifi?, keep these habits in mind:

  • Print at least once a week to prevent ink from drying in the nozzles.
  • Keep the printer firmware updated through the Canon PRINT app.
  • Use genuine cartridges for the most reliable ink alerts, or buy reputable compatible brands with good chip quality.
  • Store spare cartridges in a cool, dry place and do not remove them from packaging until needed.
  • Run the nozzle check and cleaning cycle from the maintenance menu if prints show streaks.
  • Assign a static IP to the printer in your router settings to avoid rediscovery issues.

Frequently Asked Questions

Can the Canon TS3322 connect to a 5 GHz network?

No. The TS3322 supports only 2.4 GHz Wi-Fi. If your router broadcasts both bands under one name, temporarily separate them or connect the printer to the 2.4 GHz SSID.

Why does my printer keep disconnecting from Wi-Fi?

Common causes include a weak signal, router firmware changes, or the printer entering sleep mode. Move the printer closer to the router and disable aggressive power-saving on the printer if possible.

How do I reset the Canon TS3322 to factory settings?

Hold the Stop/Reset button along with the power button as described in the manual until the lamp sequence confirms a reset. This clears network settings and ink alert history in some cases.

Are compatible ink cartridges safe to use?

Yes, from reputable brands, but ink alerts may behave differently and print quality can vary. Always check chip compatibility for the TS3322.

What should I do if an ink alert will not clear?

Remove and reinstall the cartridge, clean the chip contacts, and reset the alert using the Stop/Reset button. If it persists, the cartridge may be faulty.

Conclusion

Setting up wireless printing does not have to be frustrating. Whether you choose WPS, the Canon PRINT app, or manual configuration, the process for How to Connect Canon Ts3322 Printer to Wifi? is straightforward once you know the button sequences and network requirements. Pair that with a clear understanding of ink alerts, and you will spend far less time troubleshooting and far more time printing. Keep your cartridges healthy, run occasional maintenance, and your Canon TS3322 will remain a reliable everyday printer for home and study.