
How to Connect Canon Tr4720 to Wifi? Duplex Pair Steps
Introduction The Canon TR4720 is a compact all-in-one inkjet printer built for home offices, students, and small workgroups. It handles printing, scanning, and copying in a single device, and its built-in wireless connectivity removes the need for tangled USB
Introduction
The Canon TR4720 is a compact all-in-one inkjet printer built for home offices, students, and small workgroups. It handles printing, scanning, and copying in a single device, and its built-in wireless connectivity removes the need for tangled USB cables. If you have ever wondered How to Connect Canon Tr4720 to Wifi?, you are in the right place.
Connecting your printer to a wireless network lets you send print jobs from a laptop, desktop, smartphone, or tablet without physically plugging anything into the printer. Once the connection is active, every device on the same network can discover the Canon TR4720 and use it as a shared resource. This guide walks you through every available method, explains how to verify the link, covers driver installation, and offers troubleshooting tips for when things do not go as planned.
We will also address the duplex pairing concept mentioned in the title. While the Canon TR4720 supports manual duplex printing, the wireless pairing process is what most users mean when they ask about connecting the device. We will cover both topics clearly so you can get wireless printing and two-sided document handling working without confusion.
Table of Contents
- Introduction
- Why Connect Your Canon TR4720 to Wi-Fi?
- What You Need Before You Start
- Method 1: Connect Using WPS (Push Button)
- Method 2: Connect Using Standard Wireless LAN Setup
- Method 3: Connect Using the Canon PRINT App
- Understanding Duplex Pair Steps for the TR4720
- How to Verify the Wi-Fi Connection
- Installing Drivers and Software on Your Computer
- Troubleshooting Common Wi-Fi Connection Issues
- Tips and Best Practices for Stable Wi-Fi Printing
- Comparison: Connection Methods at a Glance
- Frequently Asked Questions
- Conclusion
Why Connect Your Canon TR4720 to Wi-Fi?
Wireless printing changes the way you interact with your Canon TR4720. Instead of walking over to the printer with a USB cable every time you need a document, you can hit Print from anywhere in your home or office. This convenience is especially helpful if your printer sits in a closet, on a separate desk, or in another room entirely.
A Wi-Fi connection also enables mobile printing. You can send photos directly from your phone, print email attachments from a tablet, or submit school assignments from a laptop without transferring files to a single computer first. For households with multiple users, a shared wireless printer means no one has to monopolize one machine just to print a few pages.
When you learn How to Connect Canon Tr4720 to Wifi?, you are also future-proofing your setup. Most modern operating systems and mobile apps expect printers to be network-discoverable. A wired-only connection limits you to one computer and often requires extra configuration if you switch devices. Wireless setup removes those barriers and makes the TR4720 a true shared resource.
What You Need Before You Start
Before you begin the wireless setup, gather the following items so you do not have to pause in the middle of the process:
- Canon TR4720 printer powered on and loaded with paper.
- Wireless router that is turned on and broadcasting a signal.
- Network name (SSID) and Wi-Fi password for your router.
- A computer, smartphone, or tablet connected to the same network you want the printer to join.
- Printer driver software, which you can download from Canon’s official support site if you do not have the installation CD.
Make sure your router is using the 2.4 GHz band. The Canon TR4720 typically does not connect to 5 GHz-only networks, so if your router combines both bands under a single name, you may need to temporarily separate them or connect the printer before enabling band steering. Place the printer within reasonable range of the router to avoid weak signal issues during setup.
Method 1: Connect Using WPS (Push Button)
Wi-Fi Protected Setup (WPS) is often the fastest way to connect a printer to a wireless network. This method works best if your router has a physical WPS button. It avoids typing the network password on the printer’s small screen.
Follow these steps to connect using WPS:
- Press and hold the Wi-Fi button on the Canon TR4720 until the power lamp flashes. Release the button.
- Press the Color button, then press the Wi-Fi button again.
- Confirm that the Wi-Fi lamp flashes quickly and the power lamp is lit.
- Within two minutes, press and hold the WPS button on your wireless router. The exact timing varies by router model, so check your router documentation if you are unsure where the button is located.
- Wait for the Wi-Fi lamp on the printer to stop flashing and remain steadily lit. This indicates a successful connection.
- Print a network configuration page from the printer to confirm the connection details.
If the Wi-Fi lamp continues to flash or the power lamp flashes instead, the WPS handshake likely failed. Move the printer closer to the router and repeat the steps. WPS is convenient, but not all routers support it, especially older models or some ISP-provided gateways.
Method 2: Connect Using Standard Wireless LAN Setup
If your router does not have a WPS button, or if WPS fails, you can use the standard wireless LAN setup through the printer’s control panel. This method requires you to select your network and type the password using the printer buttons.
Here is how to proceed:
- Make sure the printer is turned on and the Wi-Fi lamp is off.
- Press and hold the Stop button until the alarm lamp flashes 17 times, then release it. The wireless LAN setup mode should activate.
- Use the printer’s navigation buttons to select your Wi-Fi network name (SSID) from the list of available networks.
- Enter your Wi-Fi password carefully. The Canon TR4720 interface can be slow to navigate, so take your time with uppercase and lowercase letters.
- Confirm the settings and wait for the printer to attempt the connection.
- When the Wi-Fi lamp stops flashing and stays on, the printer is connected to your network.
This method is more universal than WPS because it works with nearly any router. The main drawback is entering a long password on a limited interface. If you make a mistake, you may need to restart the wireless setup and re-enter the credentials.
Method 3: Connect Using the Canon PRINT App
Canon offers a free mobile application called Canon PRINT Inkjet/SELPHY. This app simplifies wireless setup by letting you configure the printer from a smartphone or tablet. It is often the most user-friendly option for people who do not want to navigate printer menus.
To connect using the app:
- Download and install the Canon PRINT app from the Apple App Store or Google Play Store.
- Open the app and grant the necessary permissions for location and local network access.
- Tap Add Printer or Register Printer, depending on your app version.
- Select your Canon TR4720 from the list of detected devices.
- Choose your Wi-Fi network and enter the password when prompted by the app.
- Follow the on-screen instructions to complete the pairing process.
The app handles much of the technical handshake automatically. Once the setup finishes, you can print photos, documents, and web pages directly from your mobile device. This is an excellent choice if you primarily print from a phone or tablet and want to avoid using a computer for configuration.
Understanding Duplex Pair Steps for the TR4720
The phrase “duplex pair steps” can mean two different things. First, it may refer to pairing the printer to a wireless network so that duplex (two-sided) print jobs can be sent from any device. Second, it may refer to the actual process of printing on both sides of the paper.
It is important to know that the Canon TR4720 supports manual duplex printing, not automatic duplexing. The printer does not flip the page for you. Instead, when you select duplex printing in the driver settings, the printer will print one side, prompt you to remove the pages, reinsert them, and then print the reverse side.
To use duplex printing after you connect the printer to Wi-Fi:
- Open the document you want to print on your computer or mobile device.
- Select Print and choose the Canon TR4720 as your printer.
- Open Printer Properties or Preferences.
- Look for the Duplex Printing or Two-Sided Printing option and enable it.
- Choose the binding orientation (long-edge or short-edge binding) based on how you want the document to flip.
- Send the print job. Follow the on-screen instructions to reload the paper when the printer pauses.
If your goal was simply to pair the printer wirelessly so that duplex jobs can be submitted remotely, any of the three connection methods described earlier will accomplish that. The wireless link does not change how duplex works; it only removes the cable between your device and the printer.
How to Verify the Wi-Fi Connection
After completing any setup method, you should confirm that the Canon TR4720 is actually on the network. Do not assume the connection is active just because the setup wizard finished.
The easiest way to verify is to print a network configuration page:
- Load a few sheets of plain paper into the rear tray.
- Press and hold the Resume or Stop button until the alarm lamp flashes 15 times, then release it.
- The printer will print a network setup page that includes the SSID, signal strength, and IP address.
Check that the SSID matches your router’s network name. If the page shows an IP address such as 192.168.x.x, the printer has successfully joined the network. You can also look at the Wi-Fi lamp on the printer itself; a steady light generally means the connection is active, while a flashing light means it is still searching or has failed.
As a final check, try printing a test page from a computer or phone that is on the same network. If the job completes, you have successfully answered the question of How to Connect Canon Tr4720 to Wifi? and can proceed to install drivers on your other devices.
Installing Drivers and Software on Your Computer
Connecting the printer to Wi-Fi is only half the process. Your computer still needs the correct driver to communicate with the Canon TR4720 over the network.
For Windows:
- Visit the official Canon support website and search for the TR4720 model.
- Download the full driver and software package for your version of Windows.
- Run the installer and choose Wireless LAN Connection when prompted.
- Follow the on-screen instructions to detect the printer on your network.
- Complete the installation and print a test page.
For Mac:
- Download the Canon TR4720 driver for macOS from Canon’s support site.
- Open the downloaded file and follow the installation steps.
- Go to System Settings or System Preferences, then Printers & Scanners.
- Click the + button to add a printer.
- Select the Canon TR4720 from the network list and click Add.
If your computer cannot find the printer over Wi-Fi, make sure both devices are on the same network and that the printer’s Wi-Fi lamp is steady. You may also need to temporarily disable firewall software during the initial driver installation.
Troubleshooting Common Wi-Fi Connection Issues
Even with careful setup, wireless printers can occasionally refuse to connect or drop offline. Below are the most common problems and how to fix them.
- Printer does not appear on the network: Restart the printer, router, and computer. Verify that the printer is connected to the 2.4 GHz band, not 5 GHz.
- Wi-Fi lamp keeps flashing: The connection attempt failed. Re-enter your Wi-Fi password or try the WPS method again.
- Print jobs send but nothing prints: Check that the Canon TR4720 is set as the default printer. Clear any stuck jobs in the print queue.
- Printer goes offline after sleeping: Some routers assign dynamic IP addresses that change. Assign a static IP to the printer through your router settings or use the printer’s hostname if supported.
- Weak signal or slow printing: Move the printer closer to the router or remove physical obstructions like metal cabinets and thick walls.
- Mobile app cannot find the printer: Ensure your phone is on the same Wi-Fi network and that location services are enabled for the Canon PRINT app.
If none of these steps work, reset the printer’s network settings to factory defaults and start the wireless setup from the beginning. The reset procedure usually involves holding a specific button combination until the alarm lamp flashes a set number of times. Consult your user guide for the exact sequence.
Tips and Best Practices for Stable Wi-Fi Printing
Once your Canon TR4720 is online, a few habits will keep the connection reliable:
- Place the printer in an open area rather than inside a closed cabinet. Wireless signals travel better through open space.
- Avoid placing the printer next to microwaves, cordless phones, or baby monitors, which can cause interference on the 2.4 GHz band.
- Keep your router firmware updated. Older firmware can cause compatibility issues with wireless printers.
- Print a network configuration page every few months to confirm the IP address has not changed unexpectedly.
- Use the Canon PRINT app for quick mobile printing instead of emailing files to yourself first.
- If you change your Wi-Fi password, remember to update the printer’s saved credentials or reconnect it from scratch.
- For duplex jobs, fan the paper stack before loading it to prevent multiple sheets from feeding at once during the manual flip process.
Comparison: Connection Methods at a Glance
The table below summarizes the three main ways to connect your Canon TR4720 to a wireless network so you can choose the one that fits your situation.
| Connection Method | Difficulty | Setup Speed | Best For |
|---|---|---|---|
| WPS Push Button | Easy | Fast | Routers with a physical WPS button |
| Standard Wireless LAN Setup | Moderate | Medium | Networks without WPS or when WPS fails |
| Canon PRINT App | Easy | Fast | Smartphones, tablets, and mobile-first users |
Frequently Asked Questions
Does the Canon TR4720 support automatic duplex printing?
No. The Canon TR4720 supports manual duplex printing. You will need to remove the pages and reinsert them to print on the reverse side.
Can the TR4720 connect to a 5 GHz Wi-Fi network?
Generally, no. The printer is designed for 2.4 GHz wireless networks. If your router uses a single name for both bands, you may need to split them or connect the printer before enabling band steering.
What if I do not know my Wi-Fi password?
Check the sticker on your router, log into your router’s admin page, or contact your internet service provider. You will need the password to complete standard wireless setup.
Can I print from multiple computers after connecting to Wi-Fi?
Yes. Once the printer is on the network, any computer or mobile device on the same network can install the driver and send print jobs to the Canon TR4720.
Why does my printer show as offline?
This usually happens if the printer loses its wireless connection, goes to sleep, or if the computer is looking at an old IP address. Restart both the printer and router, then verify the printer is still connected to the correct SSID.
Is WPS better than the standard setup method?
WPS is faster if your router supports it, but standard wireless LAN setup is more reliable across different router brands. Use whichever works for your equipment.
Conclusion
Learning How to Connect Canon Tr4720 to Wifi? gives you the freedom to print from anywhere in your home or office without hunting for a USB cable. Whether you choose the WPS push-button method, the standard wireless LAN setup through the printer’s control panel, or the Canon PRINT app on your phone, the process is straightforward when you follow the steps in order.
After the wireless connection is active, remember to install the correct drivers on each computer, verify the link with a network configuration page, and configure manual duplex settings if you plan to print two-sided documents. If you run into trouble, the troubleshooting section above covers the most common issues, from weak signals to offline status.
With your Canon TR4720 successfully paired to your Wi-Fi network, you can enjoy wireless printing, scanning, and copying from every device in your household. Take a moment to print a test page, and you will be ready to start your next project without delay.