Setup and Configuration

How to Connect Brother Mfc 7840w to Wifi? Fax Link Steps

Introduction If you own a Brother MFC-7840W multifunction printer, you already know it’s a reliable workhorse capable of printing, scanning, copying, and faxing. But to get the most out of it, you’ll want it connected to your wireless network so every device i

HowToFixWiFi

Introduction

If you own a Brother MFC-7840W multifunction printer, you already know it’s a reliable workhorse capable of printing, scanning, copying, and faxing. But to get the most out of it, you’ll want it connected to your wireless network so every device in your home or office can print without cables. This guide walks you through exactly How to Connect Brother Mfc 7840w to Wifi? step by step, including the lesser-known fax link steps that many users overlook.

Whether you’re setting up the printer for the first time or reconnecting after a router change, the process is straightforward once you understand the menu system. We’ll cover every available method — control panel setup, WPS, computer-assisted installation, and fax link configuration — so you can choose the one that fits your situation best.

Table of Contents

Understanding the Brother MFC-7840W

The Brother MFC-7840W is a monochrome laser multifunction center designed for small offices and home offices. It supports printing, copying, scanning, and faxing, and it includes built-in wireless (802.11b/g) connectivity. The printer also features an Ethernet port and a USB port, giving you flexibility in how you connect it to your network.

Because it’s a slightly older model, the interface is menu-driven rather than touchscreen-based. You navigate using the arrow keys and the OK button on the control panel. Once you’re familiar with this navigation, connecting to WiFi becomes a quick task.

The printer supports several wireless security protocols, including WEP, WPA, and WPA2. This means it should work with virtually any modern router, although you may need to adjust a few settings if your router uses newer standards exclusively.

Before You Begin: Prerequisites

Before attempting to connect your Brother MFC-7840W to WiFi, gather the following information and items:

  • Your wireless network name (SSID)
  • Your wireless network password (security key/passphrase)
  • The printer powered on and in a ready state
  • A clear line of sight or proximity to the router for best signal strength
  • For computer-assisted setup: a USB cable and the Brother installation CD or downloaded driver package
  • For fax link setup: a working phone line and the recipient fax number

It’s also a good idea to print a network configuration report from the printer first. This report shows the current network status and helps you confirm whether the printer is already connected or needs configuration. To print it, press Menu, navigate to Network, then select Network Config, and press OK or Start.

Method 1: Connect Using the Control Panel

This is the most direct method and doesn’t require a computer. You’ll enter your WiFi credentials directly using the printer’s control panel.

Step-by-Step: Wireless Setup via Control Panel

  1. Press the Menu button on the control panel.
  2. Use the arrow keys to select Network and press OK.
  3. Select WLAN and press OK.
  4. Select Setup Wizard and press OK.
  5. The printer will search for available wireless networks. Wait for the list to populate.
  6. Use the arrow keys to select your network’s SSID and press OK.
  7. When prompted for the password, use the keypad to enter your wireless security key. Press the appropriate key multiple times to cycle through letters, numbers, and symbols.
  8. Press OK to confirm.
  9. The printer will attempt to connect. If successful, you’ll see a “Connected” message.
  10. Press Stop/Exit to return to the ready state.

If your network doesn’t appear in the list, ensure your router is broadcasting its SSID and that the printer is within range. You can also try the “Manual” option instead of “Setup Wizard” to enter the SSID manually.

Manual SSID Entry

If the automatic search doesn’t find your network, follow these steps:

  1. Press Menu, then navigate to Network > WLAN > Setup Wizard.
  2. When the list appears, scroll to the bottom and select <Manual>.
  3. Enter your SSID exactly as it appears, including case sensitivity.
  4. Select the authentication method (WPA2-PSK is most common).
  5. Enter the password.
  6. Confirm and wait for the connection.

Method 2: Connect Using WPS

WPS (Wi-Fi Protected Setup) allows you to connect without typing a password, provided your router supports it and WPS is enabled.

WPS Push Button Method

  1. Press the Menu button on the printer.
  2. Navigate to Network > WLAN > WPS.
  3. Select Push Button Mode and press OK.
  4. The printer will display a message asking you to press the WPS button on your router.
  5. Within two minutes, press the WPS button on your router.
  6. The printer and router will negotiate the connection automatically.
  7. Once connected, a confirmation message appears.

Note: WPS is convenient but has known security limitations. If your router allows it, consider disabling WPS after connecting, or use the password method instead for better security.

Method 3: Connect Using a Computer

If you prefer a guided setup or are having trouble with the control panel method, you can use the Brother installation software on a computer.

Computer-Assisted Wireless Setup

  1. Download the latest driver and software package from the Brother support website for the MFC-7840W.
  2. Install the software on your computer.
  3. When prompted, choose the wireless network connection option.
  4. Connect the printer to your computer temporarily using a USB cable.
  5. The software will detect the printer and transfer your wireless settings to it.
  6. When prompted, disconnect the USB cable.
  7. The printer will connect to your WiFi network automatically.
  8. Complete the installation on your computer by selecting the network printer.

This method is especially helpful for users who find the printer’s keypad difficult to use for entering long passwords. The software handles the credential transfer securely.

Setting Up Fax Link

The Brother MFC-7840W includes fax capability, and the “fax link” feature allows you to forward incoming faxes to another number or email, or to link fax settings between devices. Many users search for How to Connect Brother Mfc 7840w to Wifi? specifically because they want to use fax-over-IP or forward faxes through their network. While the MFC-7840W’s fax is primarily analog, you can configure fax link settings to route faxes efficiently.

Fax Link Prerequisites

  • A working analog phone line connected to the printer’s LINE port
  • The fax number you want to link or forward to
  • Access to the printer’s menu system

Fax Link Steps in Detail

Follow these steps to configure fax link on your Brother MFC-7840W:

  1. Press the Menu button on the control panel.
  2. Select Fax and press OK.
  3. Select Miscellaneous and press OK.
  4. Select Fax Forward or PC Fax Receive depending on your goal.
  5. For fax forwarding: select On, then enter the destination fax number using the keypad.
  6. For PC fax receive: select On, then choose the PC where faxes should be received.
  7. Press OK to save the setting.
  8. Press Stop/Exit to return to ready state.

If you want to link the fax to an email address (for receiving faxes as PDFs), you’ll need to configure the PC Fax Receive feature with the Brother PC-Fax software installed on your computer. This routes incoming faxes to your computer over the network, which is especially useful now that the printer is on WiFi.

Configuring PC Fax Receive

  1. Install the Brother PC-Fax software from the driver package.
  2. On the printer, go to Menu > Fax > Miscellaneous > PC Fax Receive.
  3. Set it to On.
  4. Select the destination PC from the list (the PC must be on the same network).
  5. Choose whether to print a copy as well.
  6. Save and exit.

Comparison of Connection Methods

Here’s a quick comparison to help you choose the right method:

Method Requires Computer Requires Password Entry Speed Best For
Control Panel No Yes Medium Quick setup, no PC needed
WPS No No Fast Routers with WPS button
Computer-Assisted Yes No (auto-transfer) Slowest Long passwords, guided setup

Troubleshooting Common Issues

Even with careful setup, you may encounter issues. Here are the most common problems and their solutions:

Printer Won’t Connect to WiFi

  • Check the password: Re-enter it carefully. Passwords are case-sensitive.
  • Check the SSID: Ensure you selected the correct network, especially if you have multiple networks or a guest network.
  • Check router settings: The MFC-7840W supports 802.11b/g. If your router is set to 802.11n/ac/ax only, the printer may not connect. Enable mixed mode or 802.11g compatibility.
  • Check the distance: Move the printer closer to the router temporarily.
  • Restart both devices: Power cycle the printer and router.

Weak or Intermittent Signal

  • Relocate the printer to reduce interference from walls or metal objects.
  • Avoid placing the printer near microwaves or cordless phones.
  • Consider a WiFi extender if the printer must stay in a low-signal area.

Fax Not Sending or Receiving

  • Verify the phone line is connected to the LINE port, not the EXT port.
  • Check that the phone line has a dial tone.
  • Adjust the ECM (Error Correction Mode) setting if faxes are failing over noisy lines.
  • Ensure the fax speed is set appropriately (try 9600 bps for long-distance lines).

Tips and Best Practices

  • Print a network report: After connecting, print a network configuration page to confirm the IP address and connection status.
  • Set a static IP: For reliable printing, consider assigning a static IP address to the printer in your router’s DHCP settings.
  • Keep firmware updated: Check the Brother website periodically for firmware updates that improve wireless stability.
  • Use WPA2: If your router supports it, use WPA2-PSK with AES for the best security.
  • Label your network: If you have multiple SSIDs, name them clearly to avoid confusion during setup.
  • Test printing: After connecting, print a test page from each device to confirm everything works.
  • Document your settings: Write down your IP address, SSID, and password in a secure location for future reference.

Frequently Asked Questions

Can I connect the Brother MFC-7840W to a 5GHz network?

No. The MFC-7840W supports only 2.4GHz wireless networks (802.11b/g). If your router broadcasts both bands, connect to the 2.4GHz SSID.

How do I find my WiFi password?

Check the label on your router, or log into your router’s admin panel. You can also find it on a connected Windows PC by going to Network Settings > WiFi > Manage Known Networks > Properties > Security.

Why does my printer keep disconnecting from WiFi?

This is often caused by router settings that put devices to sleep, or by interference. Disable any “smart connect” or band steering features, and ensure the printer has a strong signal. Assigning a static IP can also help.

Can I use the printer wirelessly for faxing?

The fax function uses an analog phone line, not WiFi. However, you can receive faxes as digital files on your computer over the network using PC Fax Receive, which is one reason people ask How to Connect Brother Mfc 7840w to Wifi? — to enable this feature.

What if my router doesn’t have a WPS button?

Use the control panel method or the computer-assisted method instead. WPS is optional and not required for a successful connection.

How do I reset the network settings on the printer?

Press Menu > Network > Network Reset, then confirm. This clears all wireless settings and returns the printer to its default network state, allowing you to start fresh.

Does the printer support WPA3?

No. The MFC-7840W supports WEP, WPA, and WPA2. If your router is set to WPA3-only, you’ll need to enable WPA2 compatibility or use a mixed mode.

Conclusion

Connecting your Brother MFC-7840W to WiFi opens up a world of convenience, letting you print, scan, and receive faxes from anywhere in your home or office. Whether you choose the control panel method, WPS, or a computer-assisted setup, the process is manageable once you know the steps. And by configuring the fax link features, you can integrate this classic multifunction printer into your modern workflow.

Remember that the key to a smooth setup is having your SSID and password ready, ensuring your router is compatible with 802.11b/g, and following each menu option carefully. If you run into trouble, the troubleshooting section above covers the most common issues. With patience and the right approach, you’ll have your printer online and ready to work in no time.

Now that you know How to Connect Brother Mfc 7840w to Wifi?, you can enjoy wireless printing and faxing without the hassle of cables. Happy printing!