
How to Change Wifi to 5ghz on Pc? Set Preferred Band
Introduction If your computer keeps connecting to the slower 2.4 GHz network even though your router broadcasts a faster 5 GHz signal, you are not alone. Many Windows PCs default to whichever band has the strongest signal, which often means 2.4 GHz. Learning H
Introduction
If your computer keeps connecting to the slower 2.4 GHz network even though your router broadcasts a faster 5 GHz signal, you are not alone. Many Windows PCs default to whichever band has the strongest signal, which often means 2.4 GHz. Learning How to Change Wifi to 5ghz on Pc? can help you reduce interference, improve latency, and get more consistent speeds for streaming, video calls, gaming, and large downloads.
This guide explains what Wi-Fi bands are, when 5 GHz is the better choice, and how to set your preferred band using Windows settings, Device Manager, and router configuration. It also covers troubleshooting steps, best practices, and common questions so you can make the change safely without disconnecting from the internet permanently.
Table of Contents
- What Are 2.4 GHz and 5 GHz Wi-Fi Bands?
- Why You Might Prefer the 5 GHz Band
- Requirements Before Changing Your Wi-Fi Band
- How to Check Whether Your PC Supports 5 GHz
- How to Change Wifi to 5ghz on Pc? Set Preferred Band in Windows
- Set Preferred Band Through Device Manager
- Use Router Settings to Force or Prioritize 5 GHz
- Troubleshooting When 5 GHz Does Not Appear or Connect
- Comparison Table: 2.4 GHz vs 5 GHz
- Tips and Best Practices
- Frequently Asked Questions
- Conclusion
What Are 2.4 GHz and 5 GHz Wi-Fi Bands?
Wi-Fi bands are different frequency ranges used by wireless networks. The two most common bands in home and office networks are 2.4 GHz and 5 GHz. A dual-band router broadcasts both, often under one network name or under separate names. Your PC’s Wi-Fi adapter can connect to either band if it supports both.
The 2.4 GHz band has fewer channels and is used by many household devices, including Bluetooth accessories, microwaves, baby monitors, and older smart devices. Because so many devices share it, 2.4 GHz can become crowded. However, it travels farther and passes through walls more easily.
The 5 GHz band offers more channels and wider channel widths. It is usually less congested and can deliver higher speeds at short to medium distances. The trade-off is that 5 GHz signals do not travel as far and are more easily weakened by walls, floors, furniture, and distance from the router.
Why You Might Prefer the 5 GHz Band
Setting your PC to prefer 5 GHz is useful when you are close enough to the router to maintain a strong signal. For example, if your desktop or laptop is in the same room as the router, 5 GHz can provide a cleaner connection with lower latency. This is especially helpful for online gaming, video conferencing, cloud backups, and streaming high-resolution video.
A preferred band setting tells Windows and the Wi-Fi adapter to look for 5 GHz first. It does not necessarily disable 2.4 GHz completely, which is helpful because your PC can still fall back if 5 GHz is unavailable. This balance is important: forcing only 5 GHz may disconnect you if you move to a room where the 5 GHz signal is too weak.
Some users also prefer 5 GHz because it avoids the crowded 2.4 GHz spectrum. If your neighborhood has many overlapping wireless networks, 2.4 GHz may slow down during peak hours. In that situation, 5 GHz often provides more stable performance even if the raw speed difference is not dramatic.
Requirements Before Changing Your Wi-Fi Band
Before you change any settings, make sure your equipment supports 5 GHz. If your router or PC adapter is single-band, no setting can create a 5 GHz connection. You will need compatible hardware and, in some cases, updated drivers.
- A router that broadcasts a 5 GHz network.
- A PC Wi-Fi adapter that supports 5 GHz, such as 802.11a, 802.11n on 5 GHz, 802.11ac, or 802.11ax.
- Updated wireless drivers from the adapter or laptop manufacturer.
- Windows 10 or Windows 11 with normal network permissions.
- The correct Wi-Fi password for the 5 GHz network if it uses a separate SSID.
It is also helpful to know whether your router uses one combined network name or separate names for each band. With one combined name, band steering may automatically move devices between bands. With separate names, you can manually choose the 5 GHz network.
How to Check Whether Your PC Supports 5 GHz
You can check support in several ways. The simplest is to look at your router’s available networks. If you see a 5 GHz network name and your PC can connect to it, your adapter supports 5 GHz. If the 5 GHz network never appears, the adapter may be single-band or the driver may be outdated.
You can also open Device Manager and expand Network adapters. Look for your wireless adapter name. Terms such as “Dual Band,” “802.11ac,” “802.11ax,” “Wi-Fi 5,” or “Wi-Fi 6” usually indicate 5 GHz support. Older adapters labeled only “802.11b/g/n” may be 2.4 GHz only unless the specifications explicitly mention 5 GHz.
Another useful check is the command prompt. Open Command Prompt and run the following command:
netsh wlan show interfaces
Look for the radio type. Values such as 802.11ac or 802.11ax suggest 5 GHz capability, while 802.11n can be either 2.4 GHz or 5 GHz depending on the adapter. For the most accurate answer, check the manufacturer’s specifications for your exact adapter model.
How to Change Wifi to 5ghz on Pc? Set Preferred Band in Windows
Windows may not show a simple “prefer 5 GHz” toggle in the main Settings app on every version. The most reliable place to set a preferred band is the wireless adapter’s advanced properties. Still, it is worth checking Windows Settings first because some systems and drivers expose band options there.
- Open Settings on your Windows PC.
- Go to Network & internet.
- Select Wi-Fi.
- Click Hardware properties or More adapter options, depending on your Windows version.
- Look for a setting named Preferred band, Band preference, or Wireless mode.
- If available, choose the option that prioritizes 5 GHz.
- Save the change and reconnect to your Wi-Fi network.
If you do not see the option, do not worry. Many Windows systems hide band controls in Device Manager instead. The next method is usually the most dependable way to set a preferred band.
Set Preferred Band Through Device Manager
Device Manager gives you access to adapter-specific settings provided by the driver. This is where most users can set a preferred band without installing extra software.
- Press Windows + X and select Device Manager.
- Expand Network adapters.
- Right-click your Wi-Fi adapter and select Properties.
- Open the Advanced tab.
- Look through the Property list for Preferred Band, Band Preference, Preferred Band Type, or a similar name.
- Select the value that prefers 5 GHz. Common values include Prefer 5.2GHz Band, 5GHz First, or 5GHz.
- Click OK to apply.
- Disconnect and reconnect to Wi-Fi, or restart the PC if the change does not take effect immediately.
Some adapters do not use the exact phrase “Preferred Band.” They may offer Wireless Mode, where you can select 802.11a/n/ac/ax. Choosing a mode that includes 5 GHz can encourage 5 GHz use, but it may also prevent connection to 2.4 GHz networks. If you need 2.4 GHz as a fallback, use a “prefer” option instead of a “5 GHz only” option.
If the Advanced tab does not show any band-related property, update the driver. Generic Windows drivers sometimes omit manufacturer-specific controls. Download the latest driver from the laptop, motherboard, or adapter manufacturer’s website, install it, and check Device Manager again.
Use Router Settings to Force or Prioritize 5 GHz
Even if your PC prefers 5 GHz, router behavior can still affect which band you use. Many modern routers use band steering, which automatically moves devices between 2.4 GHz and 5 GHz. This can be convenient, but it may ignore your preference if the router thinks 2.4 GHz is better at that moment.
To gain more control, log in to your router’s admin panel. The address is often printed on the router label and may look like 192.168.1.1 or 192.168.0.1. After logging in, look for wireless settings.
- Check whether 5 GHz is enabled.
- Give the 5 GHz network a distinct name, such as
HomeNetwork-5G. - Give the 2.4 GHz network a different name, such as
HomeNetwork-2G. - Connect your PC specifically to the 5 GHz network name.
- If available, adjust band steering settings. You can disable it or set it to prefer 5 GHz for capable devices.
- Save the settings and reconnect.
Separate SSIDs are often the easiest way to control the band manually. If both bands share one name, Windows may connect to either one, and the preferred band setting may not always override router decisions. With separate names, you can choose exactly which network your PC joins.
Troubleshooting When 5 GHz Does Not Appear or Connect
If you set the preferred band but still connect to 2.4 GHz, work through the following checks.
- Confirm 5 GHz is enabled on the router: Some routers have separate toggles for each band.
- Check distance: If you are far from the router, the 5 GHz signal may be too weak, and the adapter may fall back to 2.4 GHz.
- Update drivers: Outdated drivers can hide advanced settings or cause connection instability.
- Restart networking components: Restart the router, PC, and Wi-Fi adapter.
- Forget and reconnect: Remove the saved network profile and reconnect manually to the 5 GHz SSID.
- Check router channels: Some 5 GHz channels are DFS channels and may not be supported by all adapters. Try a common non-DFS channel such as 36, 40, 44, or 48.
- Check adapter mode: If wireless mode is set to 2.4 GHz only, change it to a dual-band or 5 GHz-capable mode.
- Test near the router: Connect while standing close to the router to confirm that 5 GHz works at all.
If 5 GHz appears but disconnects frequently, the issue may be signal strength rather than configuration. Try moving the router, reducing obstacles, or using a mesh system. In some homes, 2.4 GHz remains the more reliable band in distant rooms, even if it is slower.
Comparison Table: 2.4 GHz vs 5 GHz
| Feature | 2.4 GHz | 5 GHz |
|---|---|---|
| Typical speed | Lower to moderate | Higher at short range |
| Range | Longer | Shorter |
| Wall penetration | Better | Weaker |
| Interference | More crowded | Usually less crowded |
| Best use | Far rooms, smart devices, basic browsing | Gaming, streaming, video calls, large downloads |
| Channel availability | Fewer non-overlapping channels | More channels and wider widths |
This comparison shows why there is no universal best band. The right choice depends on your distance from the router, building materials, neighborhood congestion, and the tasks you perform on your PC.
Tips and Best Practices
- Use 5 GHz when your PC is close to the router and you need low latency or high throughput.
- Keep 2.4 GHz available as a fallback for distant rooms or weak-signal areas.
- Update your router firmware and PC wireless drivers regularly.
- Use WPA2 or WPA3 security on both bands.
- Place the router in a central, elevated, open location.
- Avoid hiding the router inside cabinets or behind large metal objects.
- Use separate SSIDs if you want precise manual control over which band your PC uses.
- Test real-world performance with a speed test and latency test before and after changing settings.
- Consider Ethernet for stationary gaming or workstation PCs if consistent performance matters most.
- If your adapter is old, upgrading to a modern dual-band or Wi-Fi 6 adapter can make a bigger difference than changing settings.
Frequently Asked Questions
Will setting a preferred band disable 2.4 GHz completely?
Usually no. A preferred band setting tells the adapter to try 5 GHz first, but it may still connect to 2.4 GHz if 5 GHz is unavailable or too weak. If you need 2.4 GHz disabled entirely, look for a wireless mode setting that supports only 5 GHz, but use that option carefully.
Why does my PC keep switching back to 2.4 GHz?
This can happen because of weak 5 GHz signal, router band steering, outdated drivers, or Windows choosing a stronger signal. Try setting a preferred band, using a separate 5 GHz SSID, updating drivers, and testing closer to the router.
Can I change Wi-Fi bands without changing router settings?
Yes. If your PC adapter supports 5 GHz and your router broadcasts it, you can often set the preferred band in Device Manager. Router changes are helpful for control but not always required.
Is 5 GHz always faster than 2.4 GHz?
Not always. 5 GHz can be faster at short range with a strong signal, but 2.4 GHz may perform better through walls and at longer distances. Network congestion and router quality also affect speed.
What if my adapter does not show a preferred band option?
Update the wireless driver from the manufacturer. If the option still does not appear, your adapter may not support advanced band controls. You can still connect manually to a 5 GHz SSID if one is available.
Should I use 5 GHz for gaming?
Yes, if the signal is strong and stable. Low latency matters more than peak speed for gaming. If 5 GHz is unstable in your room, 2.4 GHz or a wired Ethernet connection may be better.
Conclusion
Changing your PC to prefer 5 GHz can improve wireless performance when you are close to the router and need a cleaner, faster connection. The process usually starts with checking hardware support, then using Device Manager to set a preferred band. Router settings, separate SSIDs, and driver updates can further improve reliability.
Remember that 5 GHz is not always the best band in every location. Its shorter range means 2.4 GHz may still be better in distant or obstructed areas. By understanding both bands and testing your actual connection, you can choose the setup that gives your PC the best balance of speed, range, and stability.