How to Change Wifi Password on Ring? In Ring App

Introduction

If you have recently updated your home network, you may be wondering How to Change Wifi Password on Ring? The short answer is that Ring devices do not store your router password in a way that can simply be edited from a settings screen. Instead, you reconnect each Ring device to the updated Wi-Fi network through the Ring app. This process is usually quick, but it is important to follow the correct steps so your doorbell, cameras, or alarm accessories do not stay offline.

This guide explains how to reconnect Ring devices after a Wi-Fi password change, how to handle multiple devices, what to do if you also changed your network name, and how to troubleshoot common connection problems. Whether you changed your password for security reasons or installed a new router, the steps below will help you get every Ring device back online.

Table of Contents

• Introduction
• What Happens When You Change Your Wi-Fi Password?
• Before You Start
• How to Change Wifi Password on Ring? In Ring App
• Reconnecting Multiple Ring Devices
• What If You Changed the Router or Network Name?
• Device-Specific Notes
• Comparison of Reconnection Options
• Troubleshooting Ring Wi-Fi Connection Issues
• Tips and Best Practices
• Frequently Asked Questions
• Conclusion

What Happens When You Change Your Wi-Fi Password?

When you change the password on your Wi-Fi router, every device that was previously connected using the old password can no longer join the network. Ring doorbells, cameras, floodlight cams, and other connected accessories are no exception. They may show as offline in the Ring app, and live view, motion alerts, recordings, and two-way talk may stop working until the device is reconnected.

It is important to understand that changing the router password does not automatically update the password inside a Ring device. There is no single “update password” button that pushes the new password to all devices at once. Instead, each device must be reconnected individually through the Ring app. This design helps prevent unauthorized changes, but it also means you should plan for a few minutes of setup time if you have several Ring products.

If your Ring device is hardwired and has a backup battery, it may stay powered during the process. Battery-powered devices should have enough charge before you begin. A low battery can cause setup to fail or disconnect midway, so charging first is a smart habit.

Before You Start

Preparing a few details before opening the Ring app can make the reconnection process much smoother. Start by confirming the exact new Wi-Fi password. Passwords are case-sensitive, so pay attention to uppercase letters, lowercase letters, numbers, and symbols. If you are unsure, check the router label, your password manager, or the router administration page.

Next, check whether your Wi-Fi network uses a 2.4 GHz band, a 5 GHz band, or both. Many Ring devices work best on 2.4 GHz because of its longer range, although some newer devices support 5 GHz. If your router combines both bands under one network name, the Ring app may choose the appropriate band during setup, but a weak 5 GHz signal can still cause problems.

You should also make sure the Ring app is updated to the latest version. App updates often include bug fixes and compatibility improvements. If possible, connect your phone to the same Wi-Fi network you want the Ring device to use. This helps the setup process discover the network correctly.

• Confirm the exact new Wi-Fi password.
• Charge battery-powered Ring devices.
• Update the Ring app.
• Connect your phone to the target Wi-Fi network.
• Stand close to the Ring device during setup.
• Keep your router powered on and stable.

How to Change Wifi Password on Ring? In Ring App

The main method is to use the Ring app’s device health and Wi-Fi reconnection tools. The exact wording can vary slightly depending on your device model and app version, but the overall flow remains similar. Follow these steps carefully.

Step 1: Open the Ring App

Open the Ring app on your smartphone or tablet. Sign in if prompted. Make sure you are using the account that owns or shares the device you want to reconnect. If you manage multiple locations, select the correct location before continuing.

Step 2: Select the Device

Tap the menu icon, usually located in the top-left corner, then tap Devices. Choose the Ring device that needs to be reconnected. If you have several devices, repeat this process for each one. There is no bulk password update option for all devices at once, so it is best to reconnect them one by one.

Step 3: Open Device Health

On the device screen, look for Device Health. This section shows connection status, signal strength, battery level, and other diagnostics. If the device is offline, you may see a message prompting you to reconnect. Tap the Wi-Fi or network option, often labeled Change Wi-Fi Network or Reconnect to Wi-Fi.

Step 4: Put the Device in Setup Mode

The app may ask you to place the Ring device into setup mode. This usually involves pressing and releasing the setup button on the device. For some devices, the button is orange or black and may be located on the back, side, or under the faceplate. Follow the on-screen instructions exactly. A spinning light pattern typically indicates that the device is ready to connect.

If you are reconnecting a Ring Doorbell, you may need to remove the faceplate to access the setup button. For security cameras, the button is often on the top or back. If you cannot find it, check the device’s quick start guide or the Ring support page for your exact model.

Step 5: Select Your Wi-Fi Network

After the device enters setup mode, the app should display available Wi-Fi networks. Select your home network. If your network does not appear, move closer to the router or refresh the list. Avoid selecting a guest network unless you intentionally want the Ring device on that network.

Step 6: Enter the New Password

Enter the new Wi-Fi password carefully. Double-check capitalization and special characters. If the password contains unusual symbols, consider whether your router or device handles them correctly. Most modern setups work fine, but some older devices can struggle with very complex passwords.

Step 7: Complete Setup and Test

Wait for the app to confirm that the device is connected. This may take a minute or two. Once connected, test live view, motion detection, and two-way audio. If the device connects but performs poorly, check signal strength in Device Health and consider moving the router or adding a Wi-Fi extender.

Reconnecting Multiple Ring Devices

If you have more than one Ring product, you will need to reconnect each device individually. Start with the device you use most, such as a front doorbell or main security camera, then move through the rest. This prioritizes the most important coverage while you work.

A useful strategy is to create a checklist of all Ring devices before you begin. Include doorbells, indoor cameras, outdoor cameras, floodlight cams, spotlights, chimes, and alarm accessories. As each device reconnects, mark it complete. This prevents the common mistake of forgetting a camera in a less visible location.

If you have many devices, reconnecting all of them in one session may take time. Make sure your phone remains charged and connected to Wi-Fi. Avoid switching between apps too often, because some setup flows can time out if left idle.

What If You Changed the Router or Network Name?

If you changed only the password but kept the same network name, or SSID, the reconnection process is usually straightforward. You simply select the same network name and enter the new password. If you also changed the SSID, the Ring device will not recognize the old network at all, so you must select the new network name during setup.

If you installed a brand-new router and used the same SSID and password as before, some Ring devices may reconnect automatically. However, you should still verify each device in the Ring app. Automatic reconnection can fail if the router settings, security mode, or band configuration differ from the previous setup.

When setting up a new router, consider using the same SSID and password as your old network if possible. This can reduce reconnection work for many smart home devices, not just Ring products. Still, for security, avoid reusing weak or old passwords.

Device-Specific Notes

Different Ring devices may have slightly different setup requirements. Understanding these differences can save time and reduce frustration.

Ring Doorbells

Doorbell models may require removing the faceplate to access the setup button. Battery-powered doorbells should be charged before setup. Wired doorbells should remain powered, but be careful not to interrupt power during the process. After reconnecting, test the doorbell button and live view.

Ring Cameras

Indoor and outdoor cameras often have a setup button on the device body. Outdoor cameras may need to be brought closer to the router during setup if signal strength is weak. After reconnecting, check motion zones and recording settings to ensure they still work as expected.

Ring Alarm and Accessories

Ring Alarm Base Station can connect through Ethernet or Wi-Fi. If it uses Wi-Fi and the password changed, reconnect it through the app. Keypads, sensors, and other accessories communicate with the base station rather than directly with Wi-Fi, but they still depend on the base station staying online.

Ring Chimes

Ring Chime and Chime Pro connect to Wi-Fi and may need reconnection after a password change. Chime Pro can also extend the Ring network in some setups, so reconnecting it early can improve overall device performance.

Comparison of Reconnection Options

The best method depends on your situation. The table below compares common approaches after a Wi-Fi password change.

Method	Best For	What You Do	Limitations
Change Wi-Fi Network in Ring App	Most Ring devices after a password change	Select device, open Device Health, reconnect, enter new password	Must be repeated for each device
Reconnect to Wi-Fi Prompt	Devices already marked offline	Follow app prompt to enter setup mode and join network	May require physical access to setup button
Same SSID and Password on New Router	Replacing a router	Configure new router with old credentials	Not guaranteed for every device; still verify in app
Factory Reset and Re-add Device	Devices that fail normal reconnection	Reset device, then add it again in Ring app	May remove custom settings and take longer

Troubleshooting Ring Wi-Fi Connection Issues

Even when you follow the steps correctly, connection problems can occur. The most common cause is an incorrect password. Re-enter it slowly, checking each character. If possible, copy and paste the password from a trusted source, but be careful not to include extra spaces.

Another common issue is band compatibility. If your Ring device only supports 2.4 GHz and your phone is connected to a 5 GHz network with the same name, setup may still work, but signal strength can be inconsistent. Temporarily separating the bands in your router settings can help during setup. Afterward, you can recombine them if desired.

Weak signal is another frequent problem. Ring devices need a stable connection, especially for video streaming. If Device Health shows poor signal, move the router closer, remove obstructions, or use a Wi-Fi extender or mesh system. Ring Chime Pro can also help extend coverage for some Ring devices.

If the device will not enter setup mode, make sure it is powered and charged. Press the setup button firmly and hold it for the recommended time. Some devices require a longer press than expected. If nothing happens, try charging the device or checking the power supply.

Router security settings can also block connections. Ensure your router uses WPA2 or WPA3 security. Very old security modes may not be supported. MAC address filtering, parental controls, or firewall rules can also prevent Ring devices from connecting. Temporarily disable these features during setup if needed.

If all else fails, remove the device from the Ring app and add it again as if it were new. This is more time-consuming, but it can resolve corrupted settings or failed setup states. Before doing this, note your custom settings, such as motion zones and alert schedules, so you can restore them afterward.

Tips and Best Practices

Changing your Wi-Fi password is a good opportunity to improve your home network security. Use a strong password with a mix of uppercase letters, lowercase letters, numbers, and symbols. Avoid using personal information or simple patterns. A password manager can help you store it safely.

Keep your network name consistent when possible. If you replace a router, using the same SSID and password reduces setup work for smart home devices. However, never keep a weak password just for convenience. Security should come first.

Update all connected devices after a password change, not only Ring products. Smart TVs, thermostats, speakers, plugs, and appliances may also disconnect. Creating a checklist helps ensure nothing is missed.

Test your Ring devices after reconnecting. Check live view, motion alerts, night vision, two-way talk, and recording history. If you use Ring Protect, confirm that recordings are still saving correctly. A quick test prevents surprises later.

Consider placing Ring devices on a dedicated IoT network or guest network if your router supports it. This can improve security and make management easier. Just remember that your phone may need access to that network during setup.

Finally, avoid changing Wi-Fi settings during a time when you need active monitoring. If you are traveling or expecting deliveries, wait until you can troubleshoot in person. A disconnected doorbell during an important event can be frustrating.

Frequently Asked Questions

Can I change the Wi-Fi password directly in the Ring app?

No. The Ring app does not let you edit the password stored on a device. Instead, you reconnect the device to the updated network through Device Health. This is effectively how you handle a password change for Ring products.

Do I need to reconnect every Ring device after changing the password?

Yes, each device must be reconnected individually unless it automatically reconnects because the SSID and password remained exactly the same. Even then, verifying each device in the app is recommended.

Why is my Ring device not showing my Wi-Fi network?

The device may be too far from the router, the network may be hidden, or the band may not be supported. Move closer to the router, refresh the list, and check whether your network uses 2.4 GHz or 5 GHz. Some older Ring devices do not support 5 GHz.

What should I do if the password has special characters?

Enter it exactly as it was created. If setup fails repeatedly, try a password without unusual symbols temporarily to test whether the issue is password-related. You can then update to a stronger password once the device is connected.

Can Ring devices connect to 5 GHz Wi-Fi?

Some newer Ring devices support 5 GHz, but many work best on 2.4 GHz. Check your device specifications. If you experience weak signal or failed setup, 2.4 GHz is often the more reliable choice.

Will changing my Wi-Fi password delete my Ring recordings?

No. Changing your Wi-Fi password does not delete cloud recordings stored with Ring Protect. However, the device must be online to upload new recordings. Local settings may remain, but always verify after reconnecting.

What if I forgot my Ring account password?

That is different from your Wi-Fi password. Use the password reset option on the Ring sign-in screen. Once you can access the app, reconnect your devices to the updated Wi-Fi network.

Conclusion

Knowing How to Change Wifi Password on Ring? is really about knowing how to reconnect your Ring devices after your network credentials change. The Ring app guides you through the process using Device Health, setup mode, and network selection. While each device must be handled individually, the steps are usually simple if you prepare your password, charge your devices, and stay close to the router.

If you also changed your router or network name, take extra time to verify every device. Troubleshooting tips such as checking band compatibility, signal strength, and router security can resolve most issues. With a strong Wi-Fi password and properly reconnected Ring devices, you can maintain both security and reliable home monitoring.