HowToFixWiFiSimple fixes  •  Better connection
Setup and Configuration

How to Change Wifi on Vicohome Camera? Reset Connection Now

Introduction Smart home security cameras have become a staple in modern households, and the Vicohome camera is one of the most popular choices for indoor and outdoor monitoring. Whether you are keeping an eye on pets, watching the front door, or checking in on

HowToFixWiFi

Introduction

Smart home security cameras have become a staple in modern households, and the Vicohome camera is one of the most popular choices for indoor and outdoor monitoring. Whether you are keeping an eye on pets, watching the front door, or checking in on a vacation property, a reliable wireless connection is essential. But what happens when you get a new router, change your internet service provider, or simply update your WiFi password? Your camera can go offline, leaving a gap in your security coverage.

This is exactly why knowing How to Change Wifi on Vicohome Camera? is a valuable skill for any owner. Changing the wireless network on your camera is not always as intuitive as updating a phone or laptop, because the camera does not have a keyboard or screen. You have to rely on the Vicohome mobile app, physical buttons, or a special setup mode to get it back online.

In this guide, we will walk you through every available method to update your camera’s WiFi credentials. We will also explain when to reset connection now, how to troubleshoot common errors, and what best practices will keep your Vicohome camera connected for the long term. By the end of this article, you will be able to restore your video feed without calling technical support.

What Is a Vicohome Camera?

A Vicohome camera is a cloud-connected security camera designed for easy installation and remote viewing through a smartphone app. These cameras are commonly used for home security, baby monitoring, pet watching, and small business surveillance. Most models connect to your home network over WiFi and stream video to the Vicohome app, where you can view live footage, receive motion alerts, and access recorded clips.

One important technical detail is that many Vicohome cameras operate on the 2.4 GHz WiFi band rather than 5 GHz. The 2.4 GHz frequency offers better range and wall penetration, which makes it ideal for security cameras placed far from the router. However, it also means that if your router only broadcasts a 5 GHz network, or if your network uses a combined name for both bands, the camera may struggle to connect. Understanding this distinction is essential when you are learning How to Change Wifi on Vicohome Camera? because you will need to select the correct network during setup.

Vicohome cameras are generally designed to be user-friendly, but they still depend on a stable internet connection and proper app configuration. If any part of that chain breaks—such as a changed WiFi password or a new router—the camera will appear offline in the app until you update its wireless settings.

Why You Might Need to Change WiFi on Your Vicohome Camera

There are several common situations that make it necessary to update the wireless network on your camera. The most frequent reason is replacing your router. When you get a new router, the network name (SSID) and password often change, even if you try to keep them the same. Your camera has the old credentials stored in memory, so it cannot connect to the new network automatically.

Another scenario is changing your internet service provider. A new provider usually comes with new hardware and new network settings. Similarly, if you update your WiFi password for security reasons, every connected device—including your Vicohome camera—must be re-authenticated with the new password.

Moving the camera to a different location in your home or office can also prompt a WiFi change. You might want to switch it to a mesh network node or a range extender with a different SSID to improve signal strength. Some users also create a separate guest network or IoT network for smart devices, which requires moving the camera to that new network for better security and performance.

Regardless of the reason, the process is straightforward once you know the steps. The following sections will show you exactly How to Change Wifi on Vicohome Camera? using the app, the reset button, or AP mode.

Before You Start: Prerequisites and Preparation

Before you attempt to change the WiFi on your Vicohome camera, gather everything you need to avoid interruptions. First, make sure the Vicohome app is installed on your smartphone and that you are logged into your account. You will also need the camera powered on and within range of your router.

Have your new WiFi network name and password ready. It is best to write them down or keep them open on another device so you can enter them accurately. Remember that many Vicohome cameras only support 2.4 GHz networks, so verify that your new network is broadcasting on that band. If your router uses a single name for both 2.4 GHz and 5 GHz, you may need to temporarily split them or connect the camera to the 2.4 GHz band through your router settings.

Keep a small paperclip or SIM eject tool nearby. You may need it to press the reset button on the camera, especially if you are using the manual reset method. Also, ensure your smartphone is connected to the same WiFi network you want the camera to use, at least during the initial pairing process.

Finally, check that your camera’s firmware is up to date. Outdated firmware can cause connection failures during setup. If possible, update the firmware while the camera is still connected to the old network before you change anything.

How to Change Wifi on Vicohome Camera? Step-by-Step Guide

Changing the WiFi on a Vicohome camera can be done in more than one way. The method you choose depends on whether you still have access to the old network, whether the camera is responsive, and whether you prefer using the app or hardware buttons. Below is an overview of the three main approaches, followed by detailed instructions for each.

The first method uses the Vicohome mobile app and is the easiest if the camera is already online. The second method uses the physical reset button and is useful when the camera is offline or unresponsive. The third method uses Access Point (AP) mode, which creates a temporary hotspot from the camera itself so you can configure it directly from your phone.

No matter which method you choose, the goal is the same: to replace the stored WiFi credentials with your new network information and restore the camera’s live feed.

Method 1: Using the Vicohome App (Recommended)

This is the simplest way to change WiFi when your camera is still connected to the old network and you can access it through the app.

  1. Open the Vicohome app on your smartphone and log in to your account.
  2. From the device list, tap on the camera you want to update.
  3. Navigate to the device settings menu. Look for an option labeled “WiFi Settings,” “Network Settings,” or “Device Info.”
  4. Select “Change WiFi” or “Reconnect to Network.” The app will search for available networks.
  5. Choose your new WiFi network from the list. If it does not appear, make sure your phone is connected to the same network and that the network is broadcasting its SSID.
  6. Enter the WiFi password carefully. Double-check for uppercase and lowercase letters, as WiFi passwords are case-sensitive.
  7. Tap “Save” or “Connect.” The camera will attempt to disconnect from the old network and join the new one.
  8. Wait for the confirmation message. The camera’s LED indicator may flash during this process.
  9. Return to the live view screen to verify that the camera is online and streaming video.

If the app reports a connection failure, check that you are using a 2.4 GHz network and that the password is correct. You may need to move the camera closer to the router temporarily to complete the setup.

Method 2: Using the Physical Reset Button

Use this method if the camera is offline, if you no longer remember the old WiFi password, or if the app cannot detect the device. Resetting the camera clears its saved network settings and returns it to pairing mode.

  1. Locate the reset button on your Vicohome camera. It is usually a small pinhole on the bottom or back of the device.
  2. Insert a paperclip or SIM tool into the pinhole and press and hold the button for about 10 seconds.
  3. Watch for the LED indicator. It should begin flashing, typically in red and blue or another pattern that signals pairing mode.
  4. Release the button once the LED starts flashing.
  5. Open the Vicohome app and tap the “+” icon or “Add Device” to add the camera as a new device.
  6. Follow the on-screen instructions to put the camera in pairing mode if prompted.
  7. Select your new WiFi network from the list and enter the password.
  8. Wait for the app to confirm that the camera has been successfully added and connected.
  9. Name the camera and place it in your desired location.

Keep in mind that a hard reset will erase all previous settings, including custom motion detection zones and recording schedules. You will need to reconfigure those preferences after the camera reconnects to the new WiFi network.

Method 3: Access Point (AP) Mode Setup

Access Point mode is an alternative setup method that lets your phone connect directly to the camera’s temporary WiFi hotspot. This is useful when your router does not broadcast a visible SSID or when the app cannot discover the camera on the main network.

  1. Power on the camera and enable AP mode. This is often done by pressing the reset button briefly or by selecting AP mode in the app if the camera is still partially accessible.
  2. Open your smartphone’s WiFi settings and look for a network name that starts with something like “VICO_” or “AP_” followed by a series of numbers.
  3. Connect your phone to this temporary camera network. You may see a warning that the network has no internet access, which is normal.
  4. Return to the Vicohome app. It should detect the camera in AP mode and prompt you to configure the permanent WiFi settings.
  5. Choose your home WiFi network and enter the password.
  6. Send the configuration to the camera. The camera will disconnect from the AP hotspot and attempt to join your home network.
  7. Once the camera connects, switch your phone back to your regular WiFi network.
  8. Verify the live feed in the app to ensure the setup was successful.

AP mode is especially helpful for cameras installed in locations where the main WiFi signal is weak, because you can configure the camera while standing next to it before mounting it in its final spot.

Reset Connection Now: When and How to Reset

There are moments when simply changing the WiFi password in the app is not enough. If your camera is frozen, unresponsive, or stuck on an old network that no longer exists, you need to reset connection now. A reset clears the camera’s memory of network credentials and forces it to start fresh.

You should consider a reset when:

  • The camera has been offline for several days despite multiple reconnection attempts.
  • You have changed routers and the app cannot find the device on the new network.
  • The camera’s LED is behaving abnormally, such as flashing continuously or staying off.
  • You are giving the camera to a new owner and want to erase all personal settings.

To reset the connection, perform a hard reset using the physical button as described in Method 2. Hold the reset button until the LED flashes, then release. After the reset, the camera will enter pairing mode and you can set it up with your new WiFi credentials.

There is also a soft reset, which usually involves power cycling the camera by unplugging it and plugging it back in. A soft reset does not erase saved WiFi settings, but it can resolve temporary glitches. If your camera is simply lagging or the video feed is frozen, try a soft reset first before moving to a full factory reset.

After any reset, allow the camera a few minutes to fully reboot and reconnect. Do not interrupt the process by unplugging the device again, as this can corrupt the firmware or settings.

Troubleshooting Common WiFi Connection Issues

Even after following the steps above, you might encounter problems. Here are the most common issues and how to fix them.

Camera only connects to 2.4 GHz, not 5 GHz. Many Vicohome cameras do not support 5 GHz networks. If your router only broadcasts 5 GHz or uses a combined band name, the camera will not see the network. Log into your router settings and enable a separate 2.4 GHz SSID, or temporarily disable the 5 GHz band during setup.

Incorrect password. WiFi passwords are case-sensitive. If you enter the password incorrectly even once, the connection will fail. Type it slowly and consider showing the password in the app to verify each character.

Weak signal. If the camera is too far from the router, it may fail to connect or disconnect frequently. Move the camera closer during setup, then test the signal strength in its permanent location. You can also use a WiFi extender if necessary.

App cannot find the camera. Make sure your phone is on the same network as the camera during setup. Close and reopen the Vicohome app, and ensure that location permissions and local network permissions are enabled for the app on your phone.

IP address conflict. If your router assigns the same IP address to two devices, the camera may drop offline. Assign a static IP address to the camera through your router’s DHCP reservation settings.

MAC filtering enabled. Some routers use MAC address whitelists. If your camera’s MAC address is not on the list, it will be blocked. Add the camera’s MAC address to the allowed list in your router settings.

Outdated firmware. Check the Vicohome app for firmware updates. Installing the latest version can resolve bugs that interfere with WiFi connectivity.

If none of these steps work, perform a hard reset and start the setup process from scratch. This often clears stubborn configuration errors.

Comparison: WiFi Setup Methods for Vicohome Camera

The table below compares the three main methods for changing WiFi on your Vicohome camera so you can choose the best one for your situation.

Method Ease of Use Best For Erases Settings? Tools Needed
Vicohome App Easy Camera is online and app is accessible No Smartphone
Physical Reset Button Moderate Camera is offline or unresponsive Yes Paperclip or SIM tool
AP Mode Setup Moderate Hidden SSID or router discovery issues No Smartphone

Tips and Best Practices for Stable WiFi Connection

Once you have successfully changed the WiFi on your Vicohome camera, follow these best practices to keep it connected reliably.

  • Use a dedicated 2.4 GHz network. If your router supports band steering, disable it or create a separate SSID for 2.4 GHz devices. This prevents the camera from attempting to connect to 5 GHz, which it may not support.
  • Position the router wisely. Place the router in a central location, away from thick walls, metal objects, and other electronics that can cause interference.
  • Use a strong but simple password. Avoid extremely long passwords with unusual symbols, as some IoT devices have trouble parsing them. A mix of letters and numbers is usually sufficient.
  • Keep firmware updated. Enable automatic updates in the Vicohome app if available, or check manually every few months.
  • Assign a static IP. Reserve an IP address for your camera in your router settings to prevent conflicts and make the device easier to locate on your network.
  • Reboot periodically. Restarting your camera and router once every few weeks can clear temporary glitches and improve performance.
  • Monitor signal strength. Use the Vicohome app to check the camera’s WiFi signal indicator. If it is weak, consider moving the router or adding a mesh node.

Following these tips will reduce the frequency with which you need to ask How to Change Wifi on Vicohome Camera? in the future.

Security Considerations When Changing WiFi

Changing your camera’s WiFi network is also a good time to review your overall security setup. Your security camera is only as safe as the network it connects to, so take a few extra precautions.

First, make sure your WiFi network uses WPA2 or WPA3 encryption. Avoid older standards like WEP, which are easy to crack. If you are creating a separate network for smart devices, use a strong password that is different from your main network password.

Second, change the default admin password on your router. Many routers come with factory credentials that are publicly known, leaving your network vulnerable.

Third, consider placing your Vicohome camera on a guest network or IoT VLAN if your router supports it. This isolates the camera from your computers and phones, so even if the camera is compromised, your personal data remains protected.

Finally, review the users who have access to your Vicohome account. Remove any old devices or former users who no longer need access to the camera feed.

Frequently Asked Questions

Can a Vicohome camera connect to 5 GHz WiFi?

Most Vicohome cameras are designed for 2.4 GHz networks only. Before changing your WiFi, confirm that your router is broadcasting a 2.4 GHz signal. If you only have a 5 GHz network, the camera will not be able to connect.

How do I know if my camera is in pairing mode?

Pairing mode is usually indicated by a flashing LED light. The pattern varies by model, but it often alternates between red and blue. Refer to your camera’s manual for the exact indicator pattern.

Will changing WiFi delete my recordings?

Changing the WiFi network does not delete recordings stored in the cloud or on an SD card. However, if you perform a factory reset, local settings will be erased. Cloud recordings tied to your account should remain intact.

Can I change WiFi remotely?

You cannot change the WiFi network if the camera is already offline. The camera must be powered on and reachable either through the app or in pairing mode to accept new credentials.

What should I do if I forget my Vicohome account password?

Use the “Forgot Password” option in the app to reset your account credentials. You will need access to the email address associated with your account.

Why does my Vicohome camera keep disconnecting?

Frequent disconnections are often caused by weak signal, router interference, or outdated firmware. Try moving the camera closer to the router, updating the firmware, or assigning a static IP address.

Do I need to reset the camera every time I change WiFi?

No. If the camera is still online, you can change the WiFi through the app settings without a full reset. A reset is only necessary if the camera is unresponsive or offline.

Conclusion

Learning How to Change Wifi on Vicohome Camera? is an essential part of owning a smart security camera. Whether you are upgrading your router, changing your internet provider, or simply updating your password, the process is manageable once you know the right steps.

We covered three main methods: using the Vicohome app when the camera is online, using the physical reset button when the camera is offline, and using AP mode for tricky network environments. We also discussed when to reset connection now, how to troubleshoot common issues, and best practices for maintaining a stable connection.

By following this guide, you should be able to restore your camera’s video feed quickly and keep your home monitoring system running smoothly. If you run into trouble, remember to check your 2.4 GHz network, verify your password, and perform a reset only when necessary. With a little preparation, your Vicohome camera will stay online and protect what matters most.