How to Change Wifi on Ring App? Update In Seconds

Introduction

If you have recently upgraded your internet router, changed your Wi-Fi password, or moved your Ring device to a new location, you will need to reconnect it to your new network. Knowing How to Change Wifi on Ring App? is essential for keeping your smart home security running smoothly. The process is simpler than most people expect, and in many cases, you can update the connection in seconds once you know where to look.

Ring devices, including the Ring Video Doorbell, Ring Stick Up Cam, Ring Spotlight Cam, and Ring Floodlight Cam, all rely on a stable Wi-Fi connection to send alerts, stream live video, and store recordings. When your network changes, these devices go offline until you update their Wi-Fi settings through the Ring app. This guide walks you through every step, covers troubleshooting tips, compares device compatibility, and answers common questions so you never lose access to your security feed.

Table of Contents

• Introduction
• Why You Might Need to Change Wi-Fi on Ring
• Before You Start
• How to Change Wi-Fi on Ring App (iPhone)
• How to Change Wi-Fi on Ring App (Android)
• Changing Wi-Fi on Ring Doorbell
• Changing Wi-Fi on Ring Cameras
• Device and Network Compatibility Comparison
• Troubleshooting Common Issues
• Tips and Best Practices
• Frequently Asked Questions
• Conclusion

Why You Might Need to Change Wi-Fi on Ring

There are several common scenarios where updating your Ring device’s Wi-Fi connection becomes necessary. Understanding these situations helps you prepare in advance.

• New router or internet provider: Switching to a new ISP or upgrading your router means a new network name (SSID) and password.
• Changed Wi-Fi password: If you updated your network password for security reasons, your Ring devices will no longer connect.
• Moved the device: Relocating a Ring camera to a different area of your home may require connecting to a closer or stronger access point.
• Network congestion: Some users create a dedicated 2.4 GHz network for smart home devices to improve reliability.
• Firmware or app updates: Occasionally, after a major update, reconnecting the device can resolve lingering connectivity bugs.

Whatever the reason, the Ring app provides a built-in tool called “Change Wi-Fi Network” that handles most of the work for you.

Before You Start

Preparing ahead of time will save you frustration. Make sure you have the following ready before beginning the process of How to Change Wifi on Ring App?:

1. Your phone or tablet connected to the new Wi-Fi network you want the Ring device to use.
2. The Wi-Fi network name (SSID) and password written down or easily accessible.
3. Your Ring device powered on and within range of the new router.
4. The latest version of the Ring app installed from the App Store or Google Play.
5. Your Ring account login credentials.

It is also helpful to stand near the Ring device during setup, since the app may ask you to press a physical button on the device to enter setup mode.

How to Change Wi-Fi on Ring App (iPhone)

The steps on iOS are straightforward. Follow this process carefully to avoid connection errors.

1. Open the Ring app on your iPhone.
2. Tap the menu icon (three horizontal lines) in the top-left corner.
3. Select Devices from the menu.
4. Choose the Ring device you want to update.
5. Tap Device Health.
6. Scroll down and tap Change Wi-Fi Network.
7. Follow the on-screen prompts. The app will ask you to put the device into setup mode, usually by pressing the orange button on the back or bottom of the device.
8. Select your new Wi-Fi network from the list and enter the password.
9. Wait for the app to confirm the connection. A green checkmark or “Connected” message indicates success.

If the device does not appear in the list, make sure Bluetooth is enabled on your iPhone, since Ring uses Bluetooth to discover devices during setup.

How to Change Wi-Fi on Ring App (Android)

Android users follow a nearly identical process, with minor interface differences depending on the device manufacturer.

1. Open the Ring app on your Android phone.
2. Tap the hamburger menu in the top-left corner.
3. Tap Devices.
4. Select the device you want to reconnect.
5. Tap Device Health.
6. Tap Change Wi-Fi Network or Reconnect to Wi-Fi.
7. Put the device into setup mode when prompted by pressing the setup button.
8. Choose your new network and enter the password.
9. Wait for confirmation that the device is online.

On some Android phones, you may need to grant the Ring app location permissions so it can scan for nearby Wi-Fi networks. If the scan fails, enable location services temporarily and try again.

Changing Wi-Fi on Ring Doorbell

Ring Video Doorbells (including Ring Doorbell, Doorbell 2, Doorbell 3, Doorbell 4, Doorbell Pro, and Doorbell Elite) have specific physical buttons for setup mode.

Step-by-Step for Ring Doorbell

1. Remove the doorbell from its mounting bracket if needed (for battery models, you may not need to remove it).
2. Open the Ring app and navigate to the doorbell’s Device Health page.
3. Tap Change Wi-Fi Network.
4. When prompted, press and release the orange setup button on the back of the doorbell.
5. The front light on the doorbell will spin, indicating setup mode.
6. Return to the app and follow the prompts to select your network and enter the password.
7. Wait for the light to turn solid, confirming the connection.

For wired models like the Ring Doorbell Pro, make sure the device has power before starting. If the light does not spin, check that the doorbell is receiving power from the transformer.

Changing Wi-Fi on Ring Cameras

Ring cameras (Stick Up Cam, Spotlight Cam, Floodlight Cam) follow a similar process but may have different button placements.

Step-by-Step for Ring Cameras

1. Open the Ring app and select your camera.
2. Go to Device Health.
3. Tap Change Wi-Fi Network.
4. Press the setup button on the camera (location varies by model — often on top or on the back).
5. Wait for the status light to flash, indicating setup mode.
6. Follow the app prompts to connect to your new network.
7. Confirm the connection status in the app.

For battery-powered cameras, ensure the battery is charged before starting. A low battery can cause the setup process to fail midway.

Device and Network Compatibility Comparison

Not all Ring devices support the same Wi-Fi bands. Understanding which band your device uses can prevent connection failures. Here is a comparison table to help you plan your network setup.

Ring Device	Wi-Fi Band Supported	Setup Button Location	Power Source
Ring Video Doorbell (1st Gen)	2.4 GHz only	Back of device	Battery / Wired
Ring Doorbell 2	2.4 GHz only	Back of device	Battery / Wired
Ring Doorbell 3 / 3 Plus	2.4 GHz and 5 GHz	Back of device	Battery / Wired
Ring Doorbell 4	2.4 GHz and 5 GHz	Back of device	Battery / Wired
Ring Doorbell Pro	2.4 GHz and 5 GHz	Right side of device	Wired only
Ring Stick Up Cam	2.4 GHz only (older) / 2.4 & 5 GHz (newer)	Top or back	Battery / Solar / Wired
Ring Spotlight Cam	2.4 GHz and 5 GHz	Top of device	Battery / Solar / Wired
Ring Floodlight Cam	2.4 GHz and 5 GHz	Top of device	Wired only

If your device only supports 2.4 GHz and your router broadcasts a combined network name for both bands, you may need to temporarily separate the bands or use a guest network to complete setup.

Troubleshooting Common Issues

Even when you follow the steps correctly, things can go wrong. Here are the most common problems and how to fix them.

Device Not Found During Setup

If the app cannot find your Ring device, try these solutions:

• Enable Bluetooth on your phone, since Ring uses it for device discovery.
• Make sure the device is in setup mode (status light flashing or spinning).
• Move closer to the device during setup.
• Restart the Ring app and try again.

Incorrect Wi-Fi Password

Double-check that you are entering the correct password. Passwords are case-sensitive. If you are unsure, test the password on another device first.

Weak Wi-Fi Signal

If the device connects but shows a weak signal, consider moving your router closer, adding a Wi-Fi extender, or relocating the Ring device. A signal strength below two bars may cause intermittent disconnections.

Device Will Not Enter Setup Mode

Hold the setup button for at least 10 seconds. For some models, you need to remove and reinsert the battery to reset. If the device is hardwired, turn off power at the breaker for 30 seconds, then restore power.

App Crashes or Freezes

Update the Ring app to the latest version, clear the app cache, or reinstall the app. Also ensure your phone’s operating system is up to date.

Tips and Best Practices

Following these recommendations will make the process of How to Change Wifi on Ring App? faster and more reliable.

• Update firmware first: Check for firmware updates in Device Health before changing networks.
• Use a strong password: When setting up a new network, use WPA2 or WPA3 encryption for better security.
• Keep the device charged: For battery-powered devices, charge to at least 50% before starting.
• Name your networks clearly: If you have multiple networks, name them distinctly (e.g., “Home-2.4” and “Home-5”) to avoid confusion.
• Test after setup: After reconnecting, trigger a live view to confirm video and audio work properly.
• Document your settings: Keep a note of your Wi-Fi password and network name in a secure place.
• Avoid peak hours: Perform the change during off-peak times to avoid network congestion.

Frequently Asked Questions

Can I change Wi-Fi on Ring without removing the device?

Yes. For most battery-powered and wired models, you can change the Wi-Fi network while the device remains mounted. You only need to press the setup button, which is accessible on most devices without removal.

How long does it take to change Wi-Fi on Ring?

The entire process typically takes between 2 and 5 minutes, including putting the device into setup mode and entering your credentials. In ideal conditions, the connection update can happen in seconds.

Will I lose my recorded videos when changing Wi-Fi?

No. Your recorded videos are stored in the cloud (with a Ring Protect subscription) or locally (for some models). Changing the Wi-Fi network does not delete your footage.

What if my Ring device is offline and I cannot access Device Health?

If the device is offline, you can still initiate setup by pressing the setup button on the device. The Ring app will detect it via Bluetooth and walk you through reconnection.

Does Ring work with 5 GHz Wi-Fi?

Some newer Ring devices support 5 GHz, but many older models only support 2.4 GHz. Check the comparison table above to confirm your device’s compatibility.

Can I use a mobile hotspot to connect my Ring device?

Yes, but it is not recommended for long-term use. Mobile hotspots may have data caps and less stable connections, which can affect video quality and alert reliability.

Why does my Ring device keep disconnecting after a Wi-Fi change?

This usually indicates a weak signal, interference from other devices, or an overloaded router. Try moving the router, using a Wi-Fi extender, or switching to a less congested channel.

Conclusion

Now you know exactly How to Change Wifi on Ring App? Whether you are on iPhone or Android, updating your Ring device’s network connection is a quick and straightforward process. By preparing your credentials, understanding your device’s compatibility, and following the step-by-step instructions, you can keep your smart home security online with minimal downtime. Remember to test your connection after setup and follow the best practices to maintain a stable, secure network. With these tips, you will never be caught off guard when your Wi-Fi changes again.