How to Change Wifi Network Ring? Helpful Password Reset Walkthrough Steps

Introduction

If you have recently upgraded your internet plan, replaced your router, or moved to a new home, you may be wondering How to Change Wifi Network Ring? devices connect to. Ring doorbells, cameras, and security systems rely on a stable WiFi connection to stream video, send motion alerts, and keep your home secure. When your network name or password changes, your Ring device will not automatically follow along, and it can go offline until you update its settings.

This guide walks you through every step of changing the WiFi network on your Ring device, resetting your password if needed, and troubleshooting the most common problems. Whether you are using the Ring app on iOS or Android, a computer browser, or you need to perform a full reset, you will find clear instructions here. We will also cover password reset walkthrough steps, network requirements, and best practices so your Ring setup stays reliable long after the change.

Table of Contents

• What You Need Before You Start
• How to Change WiFi Network Ring Using the App
• Changing WiFi on a Ring Doorbell
• Changing WiFi on a Ring Camera or Floodlight
• Changing WiFi Through Ring.com
• Password Reset Walkthrough Steps
• Performing a Hard Reset on Your Ring Device
• WiFi Network Requirements for Ring
• Comparison of WiFi Change Methods
• Troubleshooting Common Issues
• Tips and Best Practices
• Frequently Asked Questions
• Conclusion

What You Need Before You Start

Before you begin, gather a few essentials. Having everything ready prevents interruptions and reduces the chance of locking yourself out of the device.

• Your Ring device powered on and within range of the new WiFi network.
• The Ring app installed on your smartphone, updated to the latest version.
• Your Ring account email and password. If you forgot the password, see the password reset walkthrough below.
• The new WiFi network name (SSID) and password.
• A stable internet connection on your phone during setup.
• For some devices, a small screwdriver or the Ring security screwdriver.

It is also helpful to stand close to the device during setup. Ring devices communicate over WiFi during pairing, and distance can cause timeouts.

How to Change WiFi Network Ring Using the App

The most common way to answer How to Change Wifi Network Ring? is through the official Ring app. This method keeps your device settings, recordings, and linked accounts intact.

Open the Ring App and Select Your Device

Launch the Ring app on your iOS or Android device. From the home screen, tap the device you want to update. If you have multiple devices, choose the one that is offline or needs the new network.

Go to Device Health

On the device dashboard, tap the gear icon for settings, then select Device Health. This screen shows your current connection status, signal strength, and network name.

Tap Change WiFi Network

Scroll down and tap Change WiFi Network or Reconnect to WiFi, depending on your app version. The app will guide you through scanning for available networks.

Select and Enter Your New Network

Choose your new WiFi network from the list. If it does not appear, tap Add Hidden Network and type the SSID manually. Enter the WiFi password carefully, paying attention to capitalization and special characters.

Complete the Setup

The app will send the new credentials to your Ring device. Wait for the confirmation message. The device may reboot or play a chime. Once complete, the Device Health screen should show a strong connection.

Changing WiFi on a Ring Doorbell

Ring doorbells have a setup button that you must press to enter pairing mode. The exact location varies by model.

1. Remove the faceplate if required and locate the orange setup button.
2. Press and release the setup button. The light on the front should spin white.
3. Open the Ring app and follow the WiFi change prompts.
4. When prompted, connect your phone to the temporary Ring WiFi network if asked.
5. Return to the app and select your home WiFi network.
6. Enter the password and wait for the chime or voice confirmation.

For battery-powered doorbells, make sure the battery is charged. A low battery can interrupt pairing and force you to start over.

Changing WiFi on a Ring Camera or Floodlight

Cameras and floodlight cams follow a similar process but may require you to scan a QR code on the device.

1. Plug in or power the camera. Ensure it is in setup mode with a blinking light.
2. Open the Ring app and tap Set Up a Device if the camera is not already added, or use Device Health to change WiFi.
3. Scan the QR code or MAC ID barcode on the camera label.
4. Select your new WiFi network and enter the password.
5. Wait for the camera to connect and show a live view.

Floodlight cams may need to be wired to power. If the light does not turn on, check the breaker before troubleshooting WiFi.

Changing WiFi Through Ring.com

If your phone is unavailable, you can manage some settings from a browser, but WiFi changes for most devices still require the app. However, you can use Ring.com to confirm account details, check device status, and reset passwords.

1. Visit Ring.com and log in to your account.
2. Go to your device list and select the device.
3. Review Device Health and connection status.
4. If the device is offline, use the app to reconnect it to WiFi.

The browser is best for account-level tasks rather than direct WiFi pairing.

Password Reset Walkthrough Steps

Sometimes changing your WiFi network reveals that you also need to reset your Ring account password. Follow these password reset walkthrough steps to regain access.

Request a Password Reset

On the Ring login screen, tap Forgot Password? Enter the email address associated with your account. Ring will send a reset link.

Check Your Email

Open the email from Ring and click the reset link. The link expires after a short time, so act promptly. If you do not see the email, check spam or junk folders.

Create a New Password

Choose a strong password with at least 8 characters, including uppercase, lowercase, numbers, and symbols. Avoid reusing passwords from other services.

Log Back In

Return to the Ring app and log in with your new password. You may need to verify a two-factor authentication code if enabled.

Resetting Device-Specific Passcodes

Ring devices do not have separate passwords, but your WiFi password is what matters. If you changed your router password, enter the new one during the WiFi change steps above.

Performing a Hard Reset on Your Ring Device

If the app method fails, a hard reset can clear stored network settings and let you start fresh.

1. Locate the setup button on your Ring device.
2. Press and hold it for about 20 seconds until the light flashes.
3. Release the button and wait for the device to reboot.
4. Open the Ring app and set up the device as new, selecting your WiFi network during onboarding.

A hard reset removes the device from your account temporarily, so you will need to add it again. Your cloud recordings and settings remain tied to your account.

WiFi Network Requirements for Ring

Not every WiFi network works well with Ring. Understanding requirements helps avoid repeated connection failures.

• Frequency: Most Ring devices support 2.4 GHz. Some newer models also support 5 GHz. Check your model.
• Speed: A minimum of 2 Mbps upload speed is recommended for video doorbells and cameras.
• Security: WPA2 or WPA3 is supported. WEP and open networks are not recommended.
• Signal: Aim for at least -60 dBm signal strength at the device location.
• Router features: Avoid MAC filtering unless you whitelist the device. Disable AP isolation if enabled.

If your router broadcasts a combined 2.4/5 GHz network with one name, Ring may struggle. Consider separating the bands or using a dedicated 2.4 GHz SSID.

Comparison of WiFi Change Methods

Method	Best For	Keeps Settings	Difficulty
Ring App Device Health	Quick network change	Yes	Easy
Setup Button Pairing	Offline devices	Yes	Easy
Hard Reset	Failed connections	No	Moderate
Ring.com Browser	Account and password tasks	N/A	Easy

Troubleshooting Common Issues

Even with careful steps, problems happen. Here are solutions to the most frequent issues when you try to figure out How to Change Wifi Network Ring? devices.

Device Stays Offline

Restart your router and the Ring device. Reopen the app and retry the WiFi change. Make sure your phone is on the same network you are trying to connect to.

Incorrect Password Error

Double-check the WiFi password. Temporarily show the password while typing. If your router uses special characters, try entering them carefully or change the router password to something simpler temporarily.

Network Not Found

Ensure the network is broadcasting. Move closer to the router. If using a hidden SSID, add it manually. Check that the band matches your device support.

Pairing Times Out

Disable mobile data on your phone during setup so it stays on WiFi. Turn off VPN. Restart the Ring app and try again.

Weak Signal After Change

Relocate the router or add a WiFi extender. Ring devices need consistent signal. Check Device Health for RSSI values.

Tips and Best Practices

• Update the Ring app before starting to avoid compatibility issues.
• Charge batteries fully before WiFi changes on battery-powered devices.
• Write down your WiFi password somewhere safe.
• Use a dedicated 2.4 GHz network for older Ring devices.
• Enable two-factor authentication on your Ring account for security.
• Test live view after changing networks to confirm stability.
• Avoid changing networks during peak usage hours to reduce interference.
• Keep firmware updated by leaving devices online overnight.

Frequently Asked Questions

Can I change WiFi without removing my Ring device?

Yes. Using Device Health in the app lets you change networks without removing the device from your account.

What if I forgot my Ring password?

Use the Forgot Password option on the login screen. Follow the email link to create a new password, then log back in.

Does Ring support 5 GHz WiFi?

Some newer models support 5 GHz, but many only support 2.4 GHz. Check your specific model specifications.

Why is my Ring device offline after router change?

The device still has old network credentials. Follow the WiFi change steps to enter the new SSID and password.

How long does the WiFi change take?

Usually 2 to 5 minutes. Allow extra time for reboots and firmware checks.

Can I use a mobile hotspot?

Yes, but it may be unstable and consume data. It is better for temporary access than permanent use.

Will changing WiFi delete my recordings?

No. Recordings stored in the cloud remain tied to your account.

Do I need to reset the device first?

No. A reset is only needed if pairing fails. Try the app method first.

Conclusion

Understanding How to Change Wifi Network Ring? setups need becomes simple once you know the right steps. Start with the Ring app and Device Health for the quickest results. If that fails, use the setup button or perform a hard reset. Remember to verify your network requirements, keep your password secure, and test the live view after making changes. With these password reset walkthrough steps and troubleshooting tips, your Ring doorbell or camera should stay connected and protect your home without interruption. If problems persist, Ring support can provide device-specific guidance based on your model and firmware version.