How to Change Wifi Network on Ring? Ring Device Network Steps

Introduction

If you have replaced your router, changed your internet provider, updated your Wi-Fi password, or moved to a new home, you may need to learn How to Change Wifi Network on Ring? Ring devices are designed to stay connected to a stable home network, but they do not automatically follow your phone to a new network. Instead, you usually need to guide each Ring device through a reconnection process using the Ring app.

This guide explains the complete process in plain language. You will learn how to prepare your network, how to reconnect different Ring devices, how to avoid common mistakes, and what to do when a device refuses to join the new Wi-Fi. Whether you have a Ring Video Doorbell, a Ring security camera, a Ring Chime, or another Ring accessory, the same general ideas apply, although the exact button presses can vary slightly by model.

Changing a Wi-Fi network on a Ring device is usually not difficult, but it does require patience. The most common problems happen when the device is too far from the router, the network uses an unsupported band, the password is typed incorrectly, or the device is not fully in setup mode. By following the steps below, you can reduce frustration and get your Ring system back online quickly.

Table of Contents

• Why You Might Need to Change the Wi-Fi Network on Ring
• Before You Start: What You Need
• How to Change Wifi Network on Ring? General Step-by-Step Process
• Changing Wi-Fi on Ring Doorbells
• Changing Wi-Fi on Ring Security Cameras
• Changing Wi-Fi on Ring Chimes and Accessories
• Using the Ring App vs. Ring.com
• Comparison Table: Ring Wi-Fi Change Methods
• Troubleshooting: Ring Will Not Connect to the New Wi-Fi
• Tips and Best Practices
• Security and Privacy Considerations
• Frequently Asked Questions
• Conclusion

Why You Might Need to Change the Wi-Fi Network on Ring

There are many normal reasons to change the Wi-Fi network connected to a Ring device. You might have upgraded to a new router, changed your internet service provider, renamed your network, or changed the password. You may also be moving the device to a different location in your home where the original network signal is weak.

In some cases, the device may still appear online but perform poorly. Live View may lag, motion alerts may arrive late, or video recordings may fail to upload. These symptoms can indicate that the device is connected to an old or weak network. Changing to a stronger, more reliable Wi-Fi connection can improve performance and reduce missed events.

Another common reason is network separation. Many modern routers create separate 2.4 GHz and 5 GHz networks. Some Ring devices work best on 2.4 GHz because that band travels farther and penetrates walls more effectively. If your new router uses one combined network name, the device may still connect, but performance can vary. Understanding your network setup before starting saves time.

Before You Start: What You Need

Before attempting to change the Wi-Fi network, gather a few items. First, make sure your phone is connected to the new Wi-Fi network you want the Ring device to use. The Ring app often uses your phone’s current connection as a reference during setup. Second, have your Wi-Fi network name and password ready. If your password contains unusual symbols, double-check it carefully because even one incorrect character can stop the connection.

You should also charge or power the device if possible. Battery-powered Ring devices should have enough battery to complete setup. Wired devices should be properly powered. A device with low battery may disconnect during the process or fail to enter setup mode.

Finally, stand close to both the Ring device and the router during setup. A strong signal helps the device discover and join the network. If the device is far away, temporarily move closer to the router if the device is portable, or use a Wi-Fi extender or mesh node near the installation location.

• Your Ring account login details
• The Ring app installed and updated on your phone
• The new Wi-Fi network name and password
• A charged battery or reliable power source for the device
• Physical access to the device’s setup button

How to Change Wifi Network on Ring? General Step-by-Step Process

The exact screens can change as the Ring app updates, but the general process is consistent. Start by opening the Ring app and signing in. Tap the menu icon, then choose Devices. Select the device you want to update. From the device dashboard, look for Device Health or Device Settings. You are looking for an option related to Wi-Fi, network, or reconnection.

Many Ring devices offer a button labeled Change Wi-Fi Network or Reconnect to Wi-Fi. Tap that option. The app will usually ask you to put the device into setup mode. Setup mode is a temporary state that allows the device to receive new network information. For many devices, you press and hold the setup button until a light flashes. Some doorbells require you to remove the faceplate or press a button on the back. Some cameras have a setup button on the top, bottom, or back.

Once the device is in setup mode, the app may ask you to scan a QR code or MAC ID barcode. This is common for first-time setup and sometimes for reconnection. After scanning, select your new Wi-Fi network from the list or enter it manually. Type the password carefully, then wait while the device connects. The light pattern will change when the connection is successful, and the app will confirm that the device is online.

1. Open the Ring app and sign in.
2. Tap the menu and select Devices.
3. Choose the Ring device you want to update.
4. Open Device Health or Device Settings.
5. Tap Change Wi-Fi Network or Reconnect to Wi-Fi.
6. Put the device into setup mode using its setup button.
7. Scan the QR code or MAC ID if prompted.
8. Select the new Wi-Fi network.
9. Enter the Wi-Fi password carefully.
10. Wait for the app to confirm the connection.
11. Test Live View and motion detection.

After the device reconnects, do not stop immediately. Open Live View to confirm that video loads smoothly. Walk in front of the device to trigger motion and check whether alerts arrive promptly. If the device is part of a larger Ring system, verify that it communicates correctly with other devices.

Changing Wi-Fi on Ring Doorbells

Ring doorbells are often installed at the front of a home, which can make Wi-Fi changes slightly more challenging. The front door may be far from the router, and thick walls can reduce signal strength. If you are changing networks, it is helpful to test the Wi-Fi signal at the door before starting. A phone speed test at the door can reveal whether the new network is strong enough.

For many Ring doorbells, the process begins in the app under Device Health. Tap Change Wi-Fi Network, then follow the prompts. When asked, put the doorbell into setup mode. Depending on the model, you may press and hold the orange button on the back, remove the faceplate and press a button, or use a small setup button. The light on the doorbell should begin flashing, indicating it is ready.

If your doorbell is hardwired, make sure power is stable. If it is battery-powered, charge it fully before starting. A low battery can cause the doorbell to drop offline during setup. If the doorbell does not enter setup mode, remove it from its mount if necessary and try again. Some models need to be removed to access the setup button.

After connecting, test the doorbell thoroughly. Press the doorbell button, check whether the chime works, and view the live video. If the video is slow, consider adding a Wi-Fi extender or mesh node near the door. A weak connection may allow the doorbell to connect but still deliver poor performance.

Changing Wi-Fi on Ring Security Cameras

Ring security cameras include indoor cameras, outdoor cameras, floodlight cameras, and spotlight cameras. The general Wi-Fi change process is similar, but setup buttons and power sources vary. Indoor cameras are usually easier because they are closer to the router. Outdoor cameras may require ladder access and stronger weather-resistant planning.

Open the Ring app, select the camera, and go to Device Health. Choose the Wi-Fi reconnection option. The app will guide you to put the camera into setup mode. For many cameras, you press and hold the setup button until the status light changes. Some cameras may need to be unplugged and plugged back in while holding the button.

Floodlight and spotlight cameras are often hardwired to outdoor electrical boxes. Before changing their Wi-Fi, ensure the power is on and the lights respond normally. If the camera is offline because of a network change, it may still have power but no connection. Follow the app prompts and put it into setup mode. Because these devices are mounted high, plan your ladder and safety steps before starting.

After reconnection, check camera angles, motion zones, and night vision. A network change does not usually reset these settings, but it is wise to confirm that everything works. If the camera was offline for a long time, it may need time to update firmware or sync settings.

Changing Wi-Fi on Ring Chimes and Accessories

Ring Chimes and other accessories also rely on Wi-Fi. A Chime plugs into a standard outlet, making it one of the easier devices to update. Open the app, select the Chime, and choose the Wi-Fi option. Put the Chime into setup mode by pressing the side button until the light flashes. Then select the new network and enter the password.

Accessories such as Ring Alarm base stations or sensors may have different network requirements. Some Alarm systems use Ethernet or cellular backup in addition to Wi-Fi. If you are changing networks for a Ring Alarm system, check the specific device settings and consider keeping Ethernet connected during the transition to avoid losing protection.

When updating multiple devices, start with the device closest to the router and move outward. This helps you confirm that the new network is working before tackling harder-to-reach devices. It also reduces the chance of multiple devices being offline at the same time.

Using the Ring App vs. Ring.com

The Ring mobile app is the most common and convenient way to change a Wi-Fi network. It provides step-by-step prompts, device setup mode detection, and network selection. For most users, the app is the best tool. Make sure it is updated before starting because older versions may lack newer setup flows.

Ring.com can be useful for account management, viewing event history, checking device status, and managing subscriptions. However, physical device setup usually requires the mobile app because the phone must communicate directly with the device during setup mode. The web interface may not fully replace the app for Wi-Fi changes.

If you are helping a family member or managing a property remotely, you may need to coordinate with someone on-site. They can put the device into setup mode while you guide them through the app. Remote-only changes are not always possible because setup mode requires physical access.

Comparison Table: Ring Wi-Fi Change Methods

Device Type	Best Method	Setup Mode Needed?	Common Challenge	Recommended Tip
Ring Video Doorbell	Ring app Device Health	Yes	Weak signal at front door	Test Wi-Fi at the door first
Ring Security Camera	Ring app Device Health	Yes	Camera mounted high or outdoors	Prepare ladder and charge battery
Ring Chime	Ring app Device Health	Yes	Outlet location far from router	Try a different outlet temporarily
Floodlight Camera	Ring app Device Health	Yes	Hardwired power and outdoor access	Confirm power before setup
Ring Alarm Base Station	App or Ethernet-assisted setup	Sometimes	Loss of security coverage	Keep Ethernet connected during change

Troubleshooting: Ring Will Not Connect to the New Wi-Fi

If your Ring device will not connect, start with the simplest checks. Confirm that your phone is connected to the new Wi-Fi and that the password is correct. Re-enter the password slowly, watching for capitalization and special characters. Many connection failures are caused by a single incorrect character.

Next, check whether your network uses a supported band. Many Ring devices work best on 2.4 GHz. If your router combines 2.4 GHz and 5 GHz under one network name, the device may struggle. Try creating a separate 2.4 GHz network name or temporarily disabling 5 GHz during setup. After the device connects, you can re-enable the combined network if needed.

Signal strength is another major factor. If the device is too far from the router, it may fail to join even with the correct password. Move the router, add a mesh node, or use a Wi-Fi extender. For battery-powered devices, temporarily bring the device closer to the router during setup, then reinstall it after connection.

If the device is stuck in setup mode or the app cannot find it, restart both the device and the app. Force close the Ring app, reopen it, and try again. Restart your phone if necessary. For the device, remove power or battery, wait a few seconds, and restore power. Then put it back into setup mode.

Router settings can also block connection. Check for MAC address filtering, parental controls, firewall rules, or VPN settings that might interfere. Some routers block new devices by default. Temporarily disable these features during setup, then re-enable them afterward. If your router has a guest network, avoid using it for Ring devices because guest networks often restrict device communication.

If all else fails, you may need to remove the device from your Ring account and set it up as new. This should be a last resort because it can remove some settings. Before doing this, try a factory reset only if recommended for your specific model. Follow official Ring instructions for your device to avoid accidental data loss or account issues.

Tips and Best Practices

Plan your network change before touching the devices. If possible, keep the old router’s network name and password on the new router. This is the easiest way to avoid reconnecting every smart device. If the new router uses the same SSID and password, many Ring devices may reconnect automatically or with minimal effort.

Update the Ring app before starting. App updates often include setup improvements and bug fixes. Also update your phone’s operating system if needed. A stable app experience makes the process smoother.

Change one device at a time. If you update several devices at once and something fails, it becomes harder to identify the problem. Start with the most important device, such as the front doorbell or main camera, then move to secondary devices.

Keep a written record of your Wi-Fi password and network names. Store it securely. When reconnecting smart home devices, having accurate information prevents repeated failed attempts. Avoid sharing passwords in unsecured notes or messages.

After reconnecting, monitor device health for a few days. Ring app Device Health shows signal strength, power status, and connection details. If signal strength is poor, address it before it causes missed alerts. Small adjustments, such as moving a router a few feet or adding a mesh node, can make a big difference.

Security and Privacy Considerations

When changing Wi-Fi networks, treat your Ring devices as part of your home security system. Use a strong Wi-Fi password and avoid simple or default passwords. A weak network password can expose your cameras and doorbells to unauthorized access. Enable WPA2 or WPA3 encryption on your router if available.

Keep your Ring account secure with a strong password and two-factor authentication. Even if someone gains access to your Wi-Fi, account-level protections add another barrier. Review shared users and remove anyone who no longer needs access.

Be cautious when using public or temporary networks. Ring devices should connect to your private home network, not a public hotspot. Public networks may be unstable and can create privacy risks. If you are moving, wait until your private network is active before setting up the devices.

After changing networks, check privacy zones, motion zones, and notification settings. These settings usually remain, but it is smart to confirm them. Make sure only intended areas are recorded and that alerts are configured correctly for your household.

Frequently Asked Questions

Can I change the Wi-Fi network on Ring without removing the device?

In many cases, yes. You can use the Ring app to reconnect the device while it remains mounted. However, you may need physical access to the setup button, which can require removing a faceplate or taking the device down depending on the model.

Does changing Wi-Fi reset my Ring settings?

No, changing the Wi-Fi network usually does not reset motion zones, privacy zones, or account settings. The device simply joins a new network. Still, it is wise to test all features after reconnection.

Why does my Ring device keep disconnecting after a Wi-Fi change?

This usually happens because of weak signal strength, router incompatibility, or incorrect band settings. Check Device Health, improve signal strength, and confirm the device is on a supported 2.4 GHz network if needed.

Can Ring devices connect to 5 GHz Wi-Fi?

Some newer Ring devices support 5 GHz, but many work best or only on 2.4 GHz. Check your specific device specifications. If setup fails, try a dedicated 2.4 GHz network.

What if I forgot my Wi-Fi password?

You will need to recover or reset the password through your router or internet provider. The Ring device cannot connect without the correct password. You can usually find router login details on a label on the router.

Should I remove and re-add the device instead of changing Wi-Fi?

Usually no. Use the Wi-Fi change option first. Removing and re-adding the device is a last resort because it can require more setup time and may affect settings.

How long does it take to change the Wi-Fi network on Ring?

Most devices reconnect within a few minutes. Outdoor, hardwired, or weak-signal devices may take longer. Allow extra time for firmware updates and testing.

Conclusion

Learning How to Change Wifi Network on Ring? is a practical skill for anyone with a smart home security setup. The process usually involves opening the Ring app, selecting the device, choosing the Wi-Fi change option, putting the device into setup mode, and entering the new network details. While the steps are simple, success depends on preparation, signal strength, correct passwords, and understanding your router’s network bands.

By following the guidance in this article, you can update Ring doorbells, cameras, chimes, and accessories with less frustration. Take your time, change one device at a time, and test each device after reconnection. If problems occur, troubleshoot methodically by checking password accuracy, signal strength, router settings, and setup mode. With a stable connection, your Ring devices can continue protecting your home and keeping you informed.