Setup and Configuration

How to Change to 5ghz Wifi on Pc? For Faster Speed

Introduction If your internet feels sluggish during video calls, online gaming, or large file downloads, the culprit might be your WiFi frequency band. Most modern routers broadcast on two bands: 2.4 GHz and 5 GHz. While 2.4 GHz has better range, it is often c

HowToFixWiFi

Introduction

If your internet feels sluggish during video calls, online gaming, or large file downloads, the culprit might be your WiFi frequency band. Most modern routers broadcast on two bands: 2.4 GHz and 5 GHz. While 2.4 GHz has better range, it is often crowded and slower. The 5 GHz band offers faster speeds and less interference, making it ideal for performance-hungry tasks. This guide walks you through everything you need to know about How to Change to 5ghz Wifi on Pc?, from checking hardware support to troubleshooting common connection problems.

By the end of this article, you will understand how to switch your PC to the 5 GHz band, verify that your hardware supports it, and optimize your connection for the best possible speed.

Understanding 5GHz WiFi vs 2.4GHz

WiFi operates on radio frequency bands, and the two most common bands for home networks are 2.4 GHz and 5 GHz. Each band has distinct characteristics that affect speed, range, and reliability.

The 2.4 GHz band has been around for a long time. It travels farther and penetrates walls and floors more effectively, which makes it suitable for larger homes or devices located far from the router. However, because so many devices use this band—including microwaves, baby monitors, Bluetooth devices, and neighboring WiFi networks—it often becomes congested. Congestion leads to slower speeds, higher latency, and intermittent dropouts.

The 5 GHz band is newer and less crowded. It provides significantly higher data transfer rates and experiences less interference from household appliances. The trade-off is that 5 GHz signals have a shorter range and struggle more with solid obstacles like thick walls. For a PC located in the same room or adjacent room to the router, 5 GHz is usually the better choice for speed.

Feature 2.4 GHz 5 GHz
Maximum speed Slower (typically up to 450–600 Mbps) Faster (often 867 Mbps to 1300 Mbps or higher)
Range Longer range, better wall penetration Shorter range, weaker wall penetration
Interference High (microwaves, Bluetooth, many networks) Low (fewer competing devices)
Best use case Smart home devices, distant rooms, basic browsing Gaming, streaming, video calls, large downloads
Channel availability Fewer non-overlapping channels More non-overlapping channels

If your goal is faster speed on a PC, switching to 5 GHz is usually the right move—provided your hardware supports it and your router is within reasonable range.

Check If Your PC Supports 5GHz WiFi

Before attempting to change your WiFi band, confirm that your computer’s wireless adapter is capable of connecting to 5 GHz networks. Not every laptop or desktop WiFi card supports dual-band connectivity, especially older models or budget adapters.

Using Device Manager

  1. Press Windows key + X on your keyboard and select Device Manager from the menu.
  2. In the Device Manager window, locate and expand the Network adapters section.
  3. Find your wireless adapter. It may have words like Wireless, Wi-Fi, 802.11, or a manufacturer name such as Intel, Realtek, or Qualcomm in the title.
  4. Right-click the adapter and select Properties.
  5. Go to the Advanced tab.
  6. Look through the property list for an option named Preferred Band, Band, or 802.11n/ac Mode.
  7. If you see an option that mentions 5 GHz or allows you to select Prefer 5GHz or 5GHz only, your adapter supports the band.

If the Advanced tab does not contain any band-related properties, your adapter may be limited to 2.4 GHz only. In that case, you would need a USB WiFi adapter or an internal PCIe card that supports dual-band connectivity.

Using Command Prompt

  1. Press Windows key + S, type cmd, right-click Command Prompt, and choose Run as administrator.
  2. Type the following command and press Enter:
netsh wlan show drivers
  1. Scroll through the output until you find the line that says Radio types supported.
  2. Look for standards such as 802.11a, 802.11n, 802.11ac, or 802.11ax.

If the list includes 802.11a, 802.11ac, or 802.11ax, your wireless adapter supports 5 GHz. If it only lists 802.11b, 802.11g, or 802.11n without the other standards, it may be restricted to 2.4 GHz.

Check If Your Router Supports 5GHz

Even if your PC supports 5 GHz, your router must also broadcast a 5 GHz signal. Most routers manufactured in the last several years are dual-band, meaning they transmit both 2.4 GHz and 5 GHz simultaneously. Some older or entry-level routers are single-band and only support 2.4 GHz.

To verify router support:

  • Check the router label or user manual for terms like dual-band, 5 GHz, 802.11ac, or WiFi 5.
  • Log into your router’s admin panel (often by typing 192.168.1.1 or 192.168.0.1 into a web browser) and look at the wireless settings.
  • See if there are separate SSID fields for 2.4 GHz and 5 GHz, or if there is a single SSID with band steering enabled.

If your router does not support 5 GHz, no setting on your PC will force a 5 GHz connection. You would need to upgrade to a dual-band or tri-band router.

How to Change to 5ghz Wifi on Pc? Using Windows Settings

The simplest way to connect to a 5 GHz network is through Windows network settings. This method assumes your router is already broadcasting a 5 GHz SSID, either under a separate network name or as part of a combined smart-connect network.

  1. Click the Start button and select Settings (the gear icon), or press Windows key + I.
  2. Go to Network & internet and then select Wi-Fi.
  3. Make sure WiFi is turned on.
  4. Click Show available networks or click the WiFi icon in the system tray at the bottom-right corner of your screen.
  5. Look for your router’s 5 GHz network. If your router uses separate names, the 5 GHz network might have 5G, 5GHz, or _5G appended to the name.
  6. Click the network name and select Connect.
  7. Enter your WiFi password if prompted and click Next.
  8. Choose whether you want your PC to be discoverable on the network. For home networks, Yes is usually appropriate.

Once connected, Windows will remember the network and attempt to reconnect to it automatically. If both 2.4 GHz and 5 GHz networks share the same name, Windows may choose either band depending on signal strength. To force 5 GHz specifically, use the Device Manager method described below.

How to Change to 5ghz Wifi on Pc? Using Device Manager

If your router broadcasts separate SSIDs for 2.4 GHz and 5 GHz, connecting through Windows Settings is usually enough. However, if you want Windows to prioritize the 5 GHz band whenever both are available, you can change the preferred band setting in Device Manager.

  1. Right-click the Start button and open Device Manager.
  2. Expand Network adapters.
  3. Right-click your wireless adapter and choose Properties.
  4. Click the Advanced tab at the top of the properties window.
  5. In the Property list on the left, scroll until you find one of the following:
    • Preferred Band
    • Band
    • Roaming Tendency
    • 802.11n/ac Mode
  6. Select the property.
  7. In the Value dropdown on the right, choose one of the following options depending on what is available:
    • Prefer 5GHz
    • 5GHz only
    • Highest
  8. Click OK to save the changes.
  9. Restart your computer or disable and re-enable the wireless adapter for the change to take effect.

After restarting, your PC should attempt to connect to 5 GHz networks first. If the 5 GHz signal is too weak, it may fall back to 2.4 GHz unless you selected 5GHz only.

How to Change to 5ghz Wifi on Pc? Using Command Prompt

Command Prompt does not provide a direct one-command switch to force a PC onto 5 GHz, but it is useful for verifying driver capabilities and diagnosing whether your wireless hardware is configured correctly.

  1. Open Command Prompt as administrator.
  2. Run the following command:
netsh wlan show interfaces
  1. Look for the Receive rate (Mbps) and Transmit rate (Mbps). Higher rates often indicate a 5 GHz connection, while lower rates may suggest 2.4 GHz.
  2. Run this command to see all available wireless networks and their bands:
netsh wlan show networks mode=bssid
  1. Review the output for your router’s SSID. If you see the same network name listed twice with different BSSIDs (MAC addresses), one is likely 2.4 GHz and the other is 5 GHz.

If Command Prompt confirms your adapter supports 5 GHz but Windows will not connect, proceed to the Device Manager steps outlined earlier. Command Prompt is best used as a diagnostic tool rather than the primary method for changing bands.

Troubleshooting: PC Won’t Connect to 5GHz

Sometimes, even after following the steps above, your PC may refuse to connect to a 5 GHz network. Here are the most common causes and how to fix them.

Update Your Wireless Drivers

Outdated or corrupted drivers are a leading cause of band issues. To update your wireless adapter driver:

  1. Open Device Manager.
  2. Expand Network adapters, right-click your wireless adapter, and select Update driver.
  3. Choose Search automatically for drivers.
  4. If Windows does not find a new driver, visit the manufacturer’s website (Intel, Realtek, Qualcomm, TP-Link, etc.) and download the latest driver for your specific adapter model and Windows version.
  5. Install the driver and restart your PC.

Separate Your 2.4GHz and 5GHz SSIDs

Some routers use a single network name for both bands and rely on band steering to decide which device connects to which band. Band steering does not always work reliably with PCs. To fix this:

  1. Log into your router’s admin panel.
  2. Navigate to the wireless settings.
  3. Disable Smart Connect or Band Steering if enabled.
  4. Give the 2.4 GHz and 5 GHz networks distinct names, such as HomeWiFi_2.4 and HomeWiFi_5G.
  5. Save the settings and reconnect your PC to the 5 GHz network name.

Check Router Placement and Distance

Because 5 GHz signals have shorter range and weaker wall penetration, your PC may not detect the 5 GHz network if it is too far from the router or if there are thick walls between them. Move the router to a more central, elevated location, or move the PC closer to the router for testing. If distance is unavoidable, consider a WiFi extender or mesh system that supports 5 GHz backhaul.

Optimizing Your 5GHz Connection for Faster Speed

Connecting to 5 GHz is only the first step. To maximize speed and stability, consider these optimization tips:

  • Use a clear channel: In your router settings, set the 5 GHz channel width to 80 MHz or 160 MHz if supported, as wider channels allow more data throughput. Avoid channels that your neighbors are heavily using.
  • Position the router properly: Place the router in an open area, away from metal objects, mirrors, and appliances like microwaves.
  • Reduce physical obstructions: Bookshelves, concrete walls, and large furniture can weaken 5 GHz signals. Keep the path between your PC and router as clear as possible.
  • Disconnect unused devices: Even on 5 GHz, too many active devices can saturate your available bandwidth.
  • Use a wired connection for critical tasks: If maximum speed and lowest latency are required, an Ethernet cable still outperforms WiFi.

Tips and Best Practices

  • Always verify both PC and router support before troubleshooting 5 GHz issues.
  • Keep your wireless drivers up to date to avoid compatibility problems.
  • Name your 2.4 GHz and 5 GHz networks differently so you can manually choose the band you want.
  • Use 5 GHz for high-bandwidth activities such as 4K streaming, online gaming, and video conferencing.
  • Reserve 2.4 GHz for smart home devices, older gadgets, and devices located far from the router.
  • Restart your router and PC periodically to clear temporary network glitches.
  • If your PC lacks 5 GHz support, an inexpensive USB dual-band WiFi adapter is a quick upgrade.

Frequently Asked Questions

How do I know if my PC is connected to 5GHz?

Open Command Prompt and run netsh wlan show interfaces. Look at the transmit and receive rates. Higher speeds generally indicate a 5 GHz connection. You can also check the WiFi properties in Settings to see the connection speed and protocol.

Can I force my PC to only use 5GHz?

Yes. In Device Manager, under your wireless adapter’s Advanced tab, set the Preferred Band or Band option to 5GHz only if available. This prevents the PC from connecting to 2.4 GHz networks.

Why can’t I see my 5GHz WiFi network on my PC?

Common reasons include: your wireless adapter does not support 5 GHz, your router is not broadcasting a 5 GHz SSID, the PC is too far from the router, or the router is using band steering with a single SSID that Windows is selecting as 2.4 GHz.

Does 5GHz WiFi go through walls?

5 GHz signals penetrate walls less effectively than 2.4 GHz signals. They are best suited for open spaces or rooms close to the router.

Will changing to 5GHz increase my internet speed?

It can improve your local WiFi speed, especially if your internet plan is fast and your 2.4 GHz connection was congested. However, it will not exceed the maximum speed provided by your internet service provider.

Is 5GHz better for gaming?

Yes. 5 GHz typically offers lower latency and higher throughput, which is ideal for online gaming, provided you are within range of the router.

Do I need a new router for 5GHz?

Only if your current router does not support dual-band WiFi. Most modern routers already support 5 GHz.

Can I use 5GHz and 2.4GHz at the same time?

Yes, on a dual-band router. Different devices can connect to different bands simultaneously.

Conclusion

Switching to the 5 GHz band is one of the easiest ways to improve your PC’s wireless performance. Faster speeds, reduced interference, and better reliability make it the preferred choice for streaming, gaming, and video calls—assuming your hardware supports it and your router is within range.

Start by confirming that both your PC and router are 5 GHz compatible. Then use Windows Settings to connect to the network, or use Device Manager to prioritize the 5 GHz band. If you run into issues, updating drivers, separating your SSIDs, and optimizing router placement usually resolve the problem.

Now that you know How to Change to 5ghz Wifi on Pc?, you can enjoy a smoother, faster wireless experience without the congestion of the 2.4 GHz band.