HowToFixWiFiSimple fixes  •  Better connection
Wifi Guide

How to Change the Ring Wifi? Ring Network Setup

Introduction If you have recently upgraded your router, changed your internet service provider, or updated your network name and password, you may be wondering how to change the Ring Wifi? Ring network setup is a straightforward process, but it does require a

HowToFixWiFi

Introduction

If you have recently upgraded your router, changed your internet service provider, or updated your network name and password, you may be wondering how to change the Ring Wifi? Ring network setup is a straightforward process, but it does require a few specific steps inside the Ring app to ensure your devices reconnect smoothly. Whether you own a Ring Video Doorbell, a security camera, or a Ring Chime, keeping your devices connected to the correct WiFi network is essential for reliable alerts, live video streaming, and two-way communication.

This guide walks you through everything you need to know about updating your Ring device’s WiFi settings. You will learn why a network change might be necessary, what to prepare before you begin, step-by-step instructions for different Ring products, troubleshooting tips for common connection problems, and best practices for maintaining a stable home security network. By the end, you will feel confident managing your Ring network setup whenever your WiFi situation changes.

Table of Contents

Why You Might Need to Change Your Ring WiFi Network

There are several common situations that require you to update the WiFi settings on your Ring devices. Understanding these scenarios can help you act quickly and avoid unnecessary downtime in your home security system.

  • New router or modem: When you replace your networking hardware, your Ring devices will not automatically connect to the new equipment, even if you use the same network name and password.
  • Changed network name (SSID) or password: Any update to your WiFi credentials will disconnect your Ring devices until you reconfigure them.
  • Switching internet providers: A new provider often means a new router and new network details, requiring a full Ring network setup update.
  • Moving to a new home: Your Ring devices will need to connect to the WiFi network at your new location.
  • Weak signal or interference: You may want to switch your Ring device to a different band (2.4 GHz or 5 GHz, if supported) or connect it to a WiFi extender for better performance.
  • Network reorganization: Some homeowners create separate networks for smart home devices to improve security and reduce congestion.

Regardless of the reason, knowing how to change the Ring Wifi? ensures your cameras and doorbells stay online and continue protecting your home.

What You Need Before You Start

A little preparation makes the process faster and helps you avoid common frustrations. Before you begin changing your Ring WiFi settings, gather the following:

  • Your smartphone or tablet: Make sure the Ring app is installed and updated to the latest version.
  • Your Ring account login: You will need access to the account associated with your devices.
  • New WiFi network name and password: Double-check the spelling and capitalization, as WiFi passwords are case-sensitive.
  • Physical access to your Ring device: Some devices require you to press a setup button during the reconnection process.
  • A fully charged battery (for battery-powered devices): If your Ring doorbell or camera runs on battery, ensure it has enough charge to complete the setup.
  • Proximity to your router: During setup, it helps to be close enough to your router to ensure a strong signal.

Having these items ready will make your Ring network setup smoother and reduce the chance of errors during reconnection.

How to Change the Ring Wifi? Step-by-Step Instructions

The process for updating your WiFi network is similar across most Ring devices. Follow these steps carefully to reconnect your device to a new network.

Step 1: Open the Ring App and Select Your Device

Launch the Ring app on your smartphone or tablet and log in to your account if prompted. From the dashboard, locate the device you want to update. Tap on the device to open its settings and controls. If you have multiple Ring devices, you will need to update each one individually, as the WiFi settings do not sync automatically across devices.

Step 2: Access Device Health Settings

Once you are on the device’s main screen, look for the Device Health option. This section displays important information about your device, including battery level, signal strength, and current network status. Tap Device Health, then find and select Change WiFi Network or Reconnect to WiFi. The exact wording may vary slightly depending on your device model and app version.

Step 3: Reconnect to a New WiFi Network

The Ring app will guide you through the reconnection process. In most cases, you will be prompted to put your device into setup mode. This typically involves pressing and releasing a setup button on the device:

  • Ring Video Doorbell: Press and release the orange button on the back of the device.
  • Ring Security Camera: Press and release the setup button, usually located on the top or back of the camera.
  • Ring Chime: Press and release the button on the side of the device.

After pressing the button, the device will enter setup mode, often indicated by a spinning or flashing light. Follow the on-screen instructions in the Ring app to select your new WiFi network from the list of available networks and enter the password. Make sure you choose the correct network, especially if you have separate 2.4 GHz and 5 GHz networks with similar names.

Step 4: Confirm the Connection

Once you enter the WiFi password, the Ring app will attempt to connect your device to the new network. This process may take a minute or two. When the connection is successful, you will see a confirmation message in the app. Return to the Device Health screen to verify that the signal strength is adequate and that the device shows as online. Test the live view feature to confirm that video and audio are working properly.

Changing WiFi on Different Ring Devices

While the general process is consistent, the location of the setup button and certain steps can vary by device. The table below compares the WiFi change process for common Ring products.

Ring Device Setup Button Location WiFi Bands Supported Physical Access Required
Ring Video Doorbell (Battery) Orange button on the back 2.4 GHz Yes, may need to remove from mount
Ring Video Doorbell (Wired) Orange button on the side or back 2.4 GHz (some models support 5 GHz) Yes
Ring Stick Up Cam Button on the back or under the cover 2.4 GHz (some models support 5 GHz) Yes
Ring Floodlight Cam Button on top of the camera housing 2.4 GHz (select models support 5 GHz) Yes, may require a ladder
Ring Chime / Chime Pro Button on the side 2.4 GHz Yes, device is indoors

Always refer to your specific model’s documentation if you cannot locate the setup button. The Ring app also provides on-screen diagrams during the setup process to help you find it.

How to Change WiFi on a Ring Chime or Chime Pro

Ring Chime and Chime Pro devices extend your doorbell’s audio alerts and, in the case of the Chime Pro, can also boost your WiFi signal for Ring devices. Changing the WiFi on these accessories follows a similar pattern but is often easier because the devices are plugged in indoors.

  1. Open the Ring app and tap the menu icon, then select Devices.
  2. Choose your Chime or Chime Pro from the list.
  3. Tap Device Health.
  4. Select Change WiFi Network.
  5. Press and release the button on the side of the Chime. The light will begin to flash, indicating setup mode.
  6. Follow the in-app prompts to connect to your new WiFi network.
  7. Wait for the confirmation message and test the Chime by triggering a motion event or pressing your doorbell.

If you use a Chime Pro as a WiFi extender for your Ring cameras, remember that changing its network may also affect the connectivity of any Ring devices linked to it. After updating the Chime Pro, check the Device Health of those linked devices to ensure they remain online.

What to Do If Your Ring Device Is Offline

If your Ring device is already offline because your WiFi network changed, the process is nearly the same, but you may encounter a few extra hurdles. When a device cannot reach the internet, the Ring app may take longer to load its settings or may display limited options.

Here is how to handle an offline device:

  • Stay near the device: Your phone will need to communicate with the Ring device directly during setup mode.
  • Put the device into setup mode manually: Press the setup button on the device even if the app is slow to respond. This often triggers the reconnection flow.
  • Use the “Set Up a Device” flow if needed: In some cases, navigating to the option to set up a device and following the prompts can help the app rediscover an offline unit without removing it from your account.
  • Avoid deleting the device: Removing the device from your Ring account should be a last resort, as it may erase saved settings and event history preferences. Try the standard reconnection steps first.

Patience is key when dealing with offline devices. Allow extra time for the app and device to establish a connection, especially if your WiFi signal is weak in the device’s location.

Troubleshooting Common Ring WiFi Connection Issues

Even when you follow the correct steps, you may run into problems during your Ring network setup. The following troubleshooting tips address the most frequent issues.

Incorrect WiFi Password

The most common cause of connection failure is an incorrect password. WiFi passwords are case-sensitive, so check for capital letters, special characters, and extra spaces. If you are unsure of the password, verify it in your router’s settings or on the label attached to your router.

Weak WiFi Signal

If the signal strength is poor at the device’s location, the connection may fail or drop frequently. Check the RSSI (Received Signal Strength Indicator) value in the Device Health section. A value closer to 0 indicates a stronger signal, while values below -60 can cause performance issues. Consider moving your router closer, installing a WiFi extender, or using a Ring Chime Pro to boost the signal.

Incompatible WiFi Band

Many Ring devices only support 2.4 GHz networks. If your router broadcasts a single network name for both 2.4 GHz and 5 GHz bands, your phone may try to connect the Ring device to the wrong band. Temporarily separating the bands in your router settings or moving farther from the router during setup can help force a 2.4 GHz connection.

Router Security Settings

Some router security features, such as MAC address filtering, firewall restrictions, or disabled SSID broadcasting, can prevent Ring devices from connecting. Ensure your router allows new devices to join and that your network is visible during setup.

App or Firmware Issues

An outdated Ring app or device firmware can cause connection problems. Update the Ring app through your device’s app store before starting. If the device reconnects but behaves oddly, check for firmware updates in the Device Health section and allow time for them to install.

Understanding Ring WiFi Requirements

To ensure a successful Ring network setup, it helps to understand the basic WiFi requirements for Ring devices. Meeting these requirements can prevent many common connectivity issues.

  • Internet speed: Ring recommends a minimum upload speed of 2 Mbps per device for optimal performance. Higher speeds are beneficial if you have multiple cameras or use features like live view frequently.
  • WiFi frequency: Most Ring devices work on 2.4 GHz networks, which offer better range through walls and obstacles. Some newer models also support 5 GHz, which can provide faster speeds at shorter distances.
  • Network security: Ring devices support WPA2 security, which is the standard for most modern routers. Open networks and certain enterprise security configurations may not be compatible.
  • Router compatibility: Most standard home routers work well with Ring devices. However, advanced configurations like custom DNS settings, VPNs running on the router, or strict parental controls may interfere with connectivity.

Reviewing these requirements before you attempt to change your WiFi settings can save time and help you identify potential obstacles in advance.

Tips and Best Practices for a Stable Ring Network Setup

Once you have successfully reconnected your devices, a few best practices can help you maintain a reliable connection and reduce the need for future troubleshooting.

  • Use a consistent network name and password: If you replace your router in the future, setting the same SSID and password can sometimes make transitions easier, though you may still need to reconnect devices manually.
  • Position your router strategically: Place your router in a central location, away from thick walls, metal objects, and appliances that can cause interference.
  • Monitor signal strength regularly: Check the Device Health section in the Ring app periodically to ensure your devices maintain a strong connection.
  • Limit network congestion: If many devices share your WiFi network, consider upgrading your internet plan or using a dual-band router to distribute traffic more effectively.
  • Keep your app and devices updated: Regular updates often include performance improvements and bug fixes that enhance connectivity.
  • Label your devices: In the Ring app, give each device a clear name based on its location. This makes it easier to identify which device needs attention if a connection issue arises.
  • Consider a dedicated smart home network: If your router supports it, creating a separate network for smart devices can improve security and stability.

Following these practices will help you get the most out of your Ring system and minimize disruptions to your home security.

Frequently Asked Questions

Do I need to remove my Ring device from the app to change the WiFi?

No. In most cases, you can change the WiFi network through the Device Health section without removing the device from your account. Removing the device should only be considered if standard reconnection steps fail.

Will I lose my recorded videos if I change my Ring WiFi network?

Changing your WiFi network does not delete videos stored in your Ring account. Your event history and subscription settings remain intact as long as you do not remove the device from your account.

Can I change the WiFi on multiple Ring devices at once?

No. Each Ring device must be updated individually. You will need to repeat the reconnection process for every doorbell, camera, and Chime connected to the old network.

Why won’t my Ring device find my new WiFi network?

This can happen if the device is out of range, the network is operating on an unsupported band, or the router is set to hide the SSID. Move closer to the router, confirm the network band is compatible, and ensure the network name is visible during setup.

How long does it take to change the Ring WiFi?

The process typically takes between two and five minutes per device. It may take longer if the device has trouble entering setup mode or if the WiFi signal is weak.

What if my Ring device does not have a setup button?

All Ring devices have a setup mechanism, but the button’s location varies by model. Check the device’s user guide or follow the in-app instructions, which include visual prompts to help you locate the button.

Does changing the WiFi affect my Ring Protect subscription?

No. Your Ring Protect subscription is tied to your account and devices, not to your WiFi network. Changing your network settings will not impact your subscription or billing.

Conclusion

Learning how to change the Ring Wifi? is an essential skill for any Ring owner. Whether you are setting up a new router, moving to a different home, or simply updating your network credentials, the process is manageable when you follow the right steps. By preparing your network information in advance, using the Device Health settings in the Ring app, and putting each device into setup mode when prompted, you can complete your Ring network setup quickly and confidently.

If you encounter issues along the way, simple troubleshooting steps like verifying your password, checking signal strength, and confirming band compatibility often resolve the problem. With a stable connection in place and a few best practices in mind, your Ring devices will continue to deliver the reliable monitoring and peace of mind you depend on.