HowToFixWiFiSimple fixes  •  Better connection
Setup and Configuration

How to Change Ring Wifi? For Better Coverage

Introduction Your Ring doorbell or security camera is only as good as its wireless connection. If the signal drops, you miss alerts, video quality suffers, and two-way talk becomes frustrating. That is why knowing How to Change Ring Wifi? is an essential skill

HowToFixWiFi

Introduction

Your Ring doorbell or security camera is only as good as its wireless connection. If the signal drops, you miss alerts, video quality suffers, and two-way talk becomes frustrating. That is why knowing How to Change Ring Wifi? is an essential skill for any Ring owner. Whether you just installed a new router, switched internet providers, or noticed your front door camera keeps going offline, updating the WiFi network on your Ring device can restore reliable coverage and peace of mind.

Ring devices connect to your home network through the Ring app, but the process is not always obvious the first time you try it. Different models—battery-powered doorbells, wired cameras, and plug-in units—have slightly different steps, and using the wrong WiFi band can cause connection failures. In this guide, we will walk you through every step of changing the WiFi on your Ring devices, explain why you might need to do it, and share tips for improving coverage so your cameras stay online where you need them most.

Table of Contents

Understanding Ring Devices and WiFi Connections

Most Ring devices operate on the 2.4 GHz WiFi band. This frequency travels farther and penetrates walls better than 5 GHz, which makes it ideal for outdoor cameras and doorbells installed far from your router. However, 2.4 GHz is also more crowded because many household gadgets—microwaves, baby monitors, and older smart home devices—share the same spectrum.

Ring devices report signal strength through the Ring app using a metric called RSSI. Values closer to -40 dBm indicate excellent signal, while numbers around -70 dBm or worse often lead to delayed notifications, choppy video, or offline events. If you are asking How to Change Ring Wifi? because of poor RSSI readings, the issue might not be the network name itself but the distance or interference between your router and the device.

It is also worth noting that Ring does not support WiFi networks that require a captive portal login, such as hotel or coffee shop WiFi. Your home network must use a standard password-protected setup, preferably WPA2 or WPA3, for the device to connect reliably.

Why Change Your Ring WiFi Network?

There are several common situations that make changing your Ring WiFi network necessary:

  • You replaced your router or internet service provider and received a new network name and password.
  • You moved to a new home and need to reconnect your Ring devices to a different network.
  • Your current router is too far from your front door or backyard, causing weak signal and frequent disconnections.
  • You upgraded to a mesh WiFi system and want Ring devices to join the new network for seamless roaming.
  • You changed your WiFi password for security reasons and need to update all connected devices.

Understanding How to Change Ring Wifi? before an emergency happens saves time. If your doorbell goes offline right before a package delivery, you will want to restore the connection quickly rather than searching for instructions in the middle of the moment.

What You Need Before You Start

Before you begin the process of changing your Ring WiFi network, gather the following items:

  • The Ring app installed on your smartphone or tablet, logged into your Ring account.
  • The name (SSID) and password of your new WiFi network.
  • Physical access to the Ring device. For battery-powered models, you may need to remove the faceplate or mounting bracket.
  • A charged mobile device or a nearby power outlet if you need to keep your phone on during setup.
  • Your WiFi router powered on and broadcasting the 2.4 GHz band.

It helps to stand near the Ring device while you work so you can confirm the signal strength in real time. If you are changing WiFi because you bought a new router, keep the old network active temporarily until you confirm the Ring device is successfully connected to the new one.

How to Change Ring Wifi? Step-by-Step for Ring Doorbell

Changing the WiFi on a Ring Video Doorbell depends on whether you have a battery-powered model or a hardwired version. The general procedure is similar, but the physical entry point differs.

Battery-Powered Ring Doorbell

  1. Open the Ring app and tap the three-line menu in the top left corner, then select Devices.
  2. Choose your Ring doorbell from the list.
  3. Tap Device Health at the bottom of the screen.
  4. Look for the Change WiFi Network option and tap it.
  5. Follow the on-screen instructions to put your doorbell into setup mode. This usually involves pressing and releasing the small setup button on the back or side of the device.
  6. When the app prompts you, select your new WiFi network from the list.
  7. Enter the WiFi password carefully and tap Continue.
  8. Wait for the app to confirm the connection. The doorbell light should flash and then stabilize.

If you cannot find the setup button, remove the faceplate by unscrewing the security screw at the bottom and lifting the cover. The button is usually located underneath.

Hardwired Ring Doorbell

  1. Open the Ring app and go to Device Health for your doorbell.
  2. Tap Change WiFi Network.
  3. Press the setup button on the device. On wired models, this is often located on the front or side, depending on the generation.
  4. Select the new network in the app and enter the password.
  5. Allow a minute or two for the device to reconnect.

After the change, check the RSSI value in Device Health. If it remains poor, you may need to move your router closer or add a WiFi extender.

How to Change Ring Wifi? Step-by-Step for Ring Cameras

Ring cameras, including the Stick Up Cam, Spotlight Cam, and Floodlight Cam, follow a similar workflow to doorbells. The main difference is where the setup button is located and whether the device is battery-powered, solar-powered, or hardwired.

Battery-Powered Cameras

  1. Open the Ring app and select your camera from Devices.
  2. Tap Device Health and choose Change WiFi Network.
  3. Press and hold the setup button on the camera until the light flashes. On many battery models, the button is under the mounting bracket or on the back.
  4. Select your new WiFi network in the app.
  5. Enter the password and wait for confirmation.

Wired or Plug-In Cameras

  1. Go to Device Health in the Ring app for your camera.
  2. Tap Change WiFi Network.
  3. Press the setup button on the camera unit.
  4. Choose the new network and enter credentials.
  5. Confirm the connection in the app.

For outdoor cameras mounted high on a wall, you may need a ladder and a helper. One person can hold the phone near the camera while the other presses the setup button, making it easier to verify the connection in real time.

How to Change Ring Wifi? Using the Ring App

The Ring app is the central hub for managing your WiFi settings. Even if you press the physical setup button on the device, you still need the app to select the new network and enter the password.

Start by opening the app and confirming you are logged into the correct Ring account. If you manage multiple locations—such as a primary home and a vacation property—make sure you are viewing the right location before changing network settings.

Navigate to Devices, select the specific Ring product, and open Device Health. The Change WiFi Network button appears under the Network section. If you do not see this option, your device may already be in setup mode, or the app may need an update.

When prompted, choose your network name. If your router broadcasts both 2.4 GHz and 5 GHz under the same name, Ring devices typically connect to 2.4 GHz automatically. If the bands have separate names, explicitly select the 2.4 GHz option. Enter the password, then wait for the app to display a success message.

Troubleshooting Common Connection Issues

Even after following the steps for How to Change Ring Wifi?, you might run into problems. Here are the most common issues and how to fix them.

Incorrect Password

Double-check the WiFi password. Passwords are case-sensitive. If you recently changed your router password, make sure all devices are using the new one.

Trying to Connect to 5 GHz Only

Many Ring devices do not support 5 GHz WiFi. If your router only broadcasts a 5 GHz network, or if both bands share the same name but the device grabs 5 GHz, the connection will fail. Split the bands in your router settings if possible, giving the 2.4 GHz band a unique name.

Weak Signal or Offline Device

Move the router closer to the Ring device or remove obstructions such as large mirrors, metal cabinets, and thick brick walls. A Ring Chime Pro can also help by acting as a dedicated WiFi extender for Ring products.

Router Security Settings

Some routers use WPA3-only security, which older Ring devices may not support. Switch your router to WPA2 or WPA2/WPA3 transitional mode for better compatibility.

App Not Showing Change WiFi Option

Update the Ring app to the latest version. If the option still does not appear, remove the device from the app and set it up as new, which forces a fresh network selection.

Optimizing WiFi Coverage for Ring Devices

Changing the network name is only half the battle. If your Ring device still struggles to stay online, you need to improve the actual coverage around your home.

Start by placing your router in a central, elevated location. Avoid hiding it inside a cabinet or placing it on the floor. WiFi signals radiate outward and downward, so a shelf or mounted position works better than a desk in the corner.

Reduce interference from other electronics. Cordless phones, Bluetooth devices, and microwave ovens can all disrupt the 2.4 GHz band. If your router allows channel selection, choose a less crowded channel such as 1, 6, or 11.

For larger homes, consider a mesh WiFi system. Mesh nodes placed near entryways and backyards give Ring devices a strong, consistent signal without the handoff issues that sometimes plague traditional extenders.

Finally, check the RSSI value regularly in the Ring app. A reading between -40 and -60 is ideal. Anything weaker than -70 suggests you should relocate the router, add an extender, or move the Ring device closer to the access point.

Comparison: Ring Chime Pro vs. Other Solutions

If your Ring device keeps losing connection after you change the WiFi network, you may need additional hardware. The table below compares common options for extending coverage to Ring products.

Solution Best For Pros Cons Approx. Cost
Ring Chime Pro Ring-only devices Designed for Ring, easy setup, doubles as a chime Limited to Ring ecosystem, one device per unit $30–$50
Standard WiFi Extender General home coverage Works with all devices, inexpensive May create separate network name, slower speeds $20–$60
Mesh WiFi System Large homes, multiple floors Seamless roaming, strong coverage, easy management Higher upfront cost, may require multiple nodes $150–$400+
Router Upgrade Outdated router hardware Better range, modern security, faster speeds May not solve distance issues alone $80–$250

Best Practices for Ring WiFi Placement

Where you install your Ring device matters as much as which network you choose. Mount doorbells at about chest height, angled slightly downward to capture visitors clearly while maintaining a strong signal path back to the router.

Avoid placing Ring cameras directly behind metal siding, stucco with wire mesh, or dense foliage. These materials absorb or reflect WiFi signals and can cause intermittent disconnects. If you must mount a camera on a metal surface, use a small mounting block or bracket to create a few inches of separation.

Keep your router firmware updated. Manufacturers release patches that improve stability and compatibility with smart home devices. Reboot your router once every few weeks to clear temporary glitches that might affect Ring connectivity.

If you have many smart devices on your network, consider setting up a separate 2.4 GHz network just for IoT gadgets. This reduces congestion on your main band and makes troubleshooting easier when you need to change WiFi settings for Ring products.

Security Considerations When Changing Ring Wifi

Whenever you update your WiFi network, take a moment to review your security settings. Use a strong, unique password for your home network. Avoid default router passwords or easily guessable phrases.

Enable WPA2 or WPA3 encryption on your router. Older WEP security is easily cracked and puts all connected devices—including Ring cameras—at risk. If your Ring device does not connect after enabling WPA3, switch to a mixed WPA2/WPA3 mode.

Regularly review the devices connected to your router. If you see unfamiliar devices, change your WiFi password and reconnect your Ring products. This is also a good time to update your Ring account password and enable two-factor authentication within the Ring app for an extra layer of protection.

Frequently Asked Questions

Can Ring devices use 5 GHz WiFi?

Most Ring devices are designed for 2.4 GHz WiFi only. Some newer models may support 5 GHz, but for the best compatibility, keep your Ring devices on a 2.4 GHz network or a router that broadcasts both bands under separate names.

Will changing my Ring WiFi delete saved recordings?

No. Changing the WiFi network does not delete videos stored in your Ring cloud account. Recordings are tied to your Ring account, not to the local network connection.

How often should I change my Ring WiFi network?

You only need to change the network when you get a new router, change your password, move homes, or experience persistent connectivity issues. There is no scheduled requirement to update it regularly.

What if my Ring device will not connect after I change the WiFi?

Verify that you selected the correct network and entered the right password. Make sure the device is within range of the router and that your router is not set to 5 GHz only. Restart both the Ring device and the router, then try the setup process again.

Do I need a Ring Chime Pro to change WiFi?

No. A Ring Chime Pro is optional. It helps extend coverage for Ring devices, but you can change your WiFi network using only the Ring app and your existing router.

Conclusion

Knowing How to Change Ring Wifi? gives you control over your home security setup. Whether you are responding to a new router, a stronger password, or a dead zone near your front door, the process is straightforward when you have the right steps in front of you.

Start with the Ring app, select your device, visit Device Health, and choose Change WiFi Network. Follow the prompts, enter your new credentials, and confirm the connection. If the signal remains weak, evaluate your router placement, consider a Ring Chime Pro or mesh system, and keep an eye on RSSI readings to catch problems early.

By combining a reliable WiFi connection with good placement habits and basic network security, your Ring doorbells and cameras will stay online and ready to capture what matters most.