HowToFixWiFiSimple fixes  •  Better connection
Wifi Guide

Does X570 Aorus Elite Have Wifi? Detailed Explanation & Key Facts

Introduction If you are building a PC around an AMD Ryzen processor and have been looking at Gigabyte motherboards, one question comes up again and again: Does X570 Aorus Elite Have Wifi? The answer is not a simple yes or no, because Gigabyte sells more than o

HowToFixWiFi

Introduction

If you are building a PC around an AMD Ryzen processor and have been looking at Gigabyte motherboards, one question comes up again and again: Does X570 Aorus Elite Have Wifi? The answer is not a simple yes or no, because Gigabyte sells more than one version of this popular X570 board. Some models ship with wireless networking built in, while others leave it out entirely and expect you to add it yourself.

This guide explains exactly which X570 Aorus Elite variants include WiFi, how to tell which one you own, and what to do if your board does not have wireless connectivity. We will cover specifications, model identification, step-by-step installation of add-on WiFi hardware, driver setup, troubleshooting, and best practices for getting the best wireless signal on an X570 platform.

Whether you are unboxing a new motherboard or trying to get an older build online without running an Ethernet cable through your house, this article will give you the facts and the instructions you need.

Table of Contents

Quick Answer: Does X570 Aorus Elite Have Wifi?

The short answer is: it depends on the exact model you purchased. Gigabyte has released the X570 Aorus Elite in multiple revisions. The standard, non-WiFi version does not include onboard wireless networking. However, variants explicitly labeled as X570 Aorus Elite WiFi or X570 Aorus Elite AX do include built-in WiFi and Bluetooth, usually powered by an Intel wireless module and an M.2 card.

If you are standing in front of your computer right now and you do not see two external WiFi antennas screwed into the rear I/O panel, there is a good chance your board is the non-WiFi model. That does not mean you are stuck without wireless forever. You can add WiFi to almost any X570 Aorus Elite through a PCIe card, a USB adapter, or an M.2 wireless card.

Throughout this article, we will help you determine which version you own and walk you through the best way to get online if wireless capability is missing.

Understanding the X570 Aorus Elite Model Variants

Gigabyte uses the Aorus branding for its enthusiast-oriented motherboards. Within the X570 chipset generation, the Aorus Elite sits below the Master and Xtreme models but above the entry-level gaming boards. Because it targets a wide audience, Gigabyte produced more than one SKU to hit different price points and regional demands.

X570 Aorus Elite (Non-WiFi)

The base X570 Aorus Elite is designed for users who prefer wired Ethernet connections or who plan to install their own wireless solution. It typically features a single Intel Gigabit LAN port, robust VRM cooling, and plenty of PCIe expansion slots, but it does not come with an onboard M.2 WiFi card or antennas in the box. If you bought the board and the box does not mention WiFi on the front, this is likely the version you have.

X570 Aorus Elite WiFi

The WiFi variant adds an M.2 wireless card—commonly an Intel WiFi 6 AX200 or similar—mounted on the motherboard. It also includes two external antennas in the package and antenna connectors on the rear I/O shield. This version supports faster wireless standards and usually includes Bluetooth 5.0 or 5.1 for connecting peripherals like headsets, keyboards, and mice.

X570 Aorus Elite AX

Some regions offer an AX designation, which generally indicates WiFi 6E support. WiFi 6E operates in the newly opened 6 GHz band, offering less interference and higher throughput in environments where many devices compete for airtime. The hardware is otherwise very similar to the standard WiFi model, but the wireless module and antennas are tuned for the 6 GHz spectrum.

How to Identify Your Specific Model

Before you buy a WiFi card or assume you already have wireless, you should confirm your motherboard revision. Here are the most reliable methods.

Check the Box and Documentation

Look at the retail box. Gigabyte prints the exact model name on the front and side. If you see WiFi or AX printed near the model name, your board includes wireless. The quick start guide and specification sheet inside the box will also list onboard WiFi as a feature if it is present.

Inspect the Rear I/O Panel

Turn your PC around and look at the back of the motherboard. Non-WiFi models usually have a plain metal I/O shield with USB ports, Ethernet, audio jacks, and video outputs. WiFi models have two small gold-colored antenna posts, often labeled ANT, where the wireless antennas screw in. If those posts are missing, you likely have the non-WiFi board.

Check the BIOS or UEFI

Restart your computer and press Delete or F2 during boot to enter the Gigabyte BIOS. Look under the Peripherals or Integrated Peripherals menu. If you see options for Onboard WiFi, Wireless LAN, or Bluetooth, your motherboard supports it. If those options are entirely absent, the hardware is probably not installed.

Check Windows Device Manager

Right-click the Start button and choose Device Manager. Expand the Network adapters section. If you see an adapter named Intel WiFi 6 AX200, Intel Wireless-AC, or something similar, the WiFi hardware is present and detected. If you only see an Ethernet controller, the board does not have onboard WiFi.

Check the Gigabyte Support Page

Visit the Gigabyte support website and search for your exact model number, including the revision number (for example, rev. 1.0). Download the specification PDF. It will explicitly state whether WiFi is included and which wireless standard it supports.

Key Specifications Comparison Table

Below is a comparison of the most common X570 Aorus Elite variants. Specifications can vary slightly by region and revision, so treat this as a general reference.

Feature X570 Aorus Elite (Non-WiFi) X570 Aorus Elite WiFi X570 Aorus Elite AX
Onboard WiFi No Yes Yes
WiFi Standard None WiFi 6 (802.11ax) WiFi 6E (802.11ax)
Bluetooth No Yes (typically Bluetooth 5.x) Yes (typically Bluetooth 5.x)
External Antennas Included No Yes (2 antennas) Yes (2 antennas)
M.2 Wireless Slot Empty or not present Populated with WiFi card Populated with WiFi 6E card
Ethernet 1 x Gigabit LAN 1 x Gigabit LAN or 2.5G LAN depending on revision 1 x Gigabit LAN or 2.5G LAN depending on revision
Typical Use Case Wired-only builds Wireless convenience out of the box High-density wireless environments

If You Do Not Have WiFi: How to Add Wireless Connectivity

Owning the non-WiFi version of the X570 Aorus Elite is not a problem. The motherboard has plenty of expansion capacity to add wireless networking after the fact. You have three main options, each with trade-offs in cost, performance, and installation effort.

PCIe WiFi Cards

A PCIe WiFi card installs into one of the motherboard’s PCI Express slots. It usually comes with external antennas and offers strong signal reception because the antennas can be positioned away from the PC case. This is a popular choice for desktop users who want performance close to an onboard solution.

USB WiFi Adapters

A USB WiFi adapter plugs into any available USB port. It is the easiest option because there is no need to open the case or handle internal hardware. However, USB adapters often have smaller antennas and may not deliver the same speed or stability as a PCIe card, especially in larger cases where the PC sits under a desk.

M.2 WiFi Cards

The X570 Aorus Elite includes M.2 slots. Some of these slots support wireless cards with an E-key interface. If your board has an available M.2 slot and you are comfortable opening the case, you can install an M.2 WiFi card internally and connect small antennas to the rear I/O or route them through the case. This keeps the installation clean and leaves USB ports free.

Step-by-Step: Installing a WiFi Card on X570 Aorus Elite

If you decide to add a PCIe or M.2 WiFi card, follow these steps carefully. Always work in a static-safe environment and disconnect power before touching components.

  1. Power down and unplug. Shut down Windows completely, turn off the power supply switch, and unplug the power cable from the wall.
  2. Open the case. Remove the side panel of your computer case so you can access the motherboard.
  3. Choose an installation slot. For a PCIe card, find an available PCIe x1 slot. For an M.2 card, locate an M.2 slot that supports wireless modules and remove the protective screw.
  4. Insert the card. Align the gold contacts with the slot and press down firmly until the card is seated. Secure it with the bracket screw if using a PCIe card, or the M.2 standoff screw if using an M.2 module.
  5. Attach antennas. Screw the external antennas into the connectors on the card or rear I/O bracket. Position them vertically for the best signal.
  6. Close the case and reconnect power. Replace the side panel, plug the PC back in, and turn on the power supply.
  7. Boot into Windows. Start your computer and let Windows detect the new hardware.

After the hardware is installed, you will still need to install drivers before the WiFi adapter appears in the network list.

Step-by-Step: Enabling WiFi in BIOS/UEFI

If your X570 Aorus Elite came with WiFi but it is not showing up in Windows, the wireless radio might be disabled in the BIOS. Follow these steps to check and enable it.

  1. Restart and enter BIOS. Reboot the computer and tap Delete or F2 repeatedly during the Gigabyte logo screen until the BIOS setup utility loads.
  2. Navigate to Peripherals. Use the arrow keys to find the Peripherals, Integrated Peripherals, or Onboard Devices menu.
  3. Locate WiFi settings. Look for an option labeled Onboard WiFi, Wireless LAN, WiFi Device, or Bluetooth.
  4. Enable the device. Change the setting from Disabled to Enabled. If there is a separate option for Bluetooth, enable that as well if you want to use wireless peripherals.
  5. Save and exit. Press F10 to save changes and reboot. Windows should now detect the WiFi adapter.

If you do not see any WiFi-related options in the BIOS, your motherboard likely does not have the wireless hardware installed. Proceed to the section on adding WiFi hardware.

Step-by-Step: Installing WiFi Drivers on Windows

Even when the hardware is present, Windows may not automatically install the correct driver. Here is how to get the right software from Gigabyte.

  1. Identify your wireless chip. Most Gigabyte X570 WiFi boards use an Intel WiFi 6 AX200 or AX210 module. Check your specification sheet to confirm.
  2. Download from Gigabyte. Go to the Gigabyte support page for your exact motherboard model and revision. Navigate to the Drivers & Tools section and download the WiFi/Bluetooth driver for your version of Windows (usually Windows 10 or Windows 11 64-bit).
  3. Run the installer. Locate the downloaded file, double-click it, and follow the on-screen prompts. Some installers extract files first and then launch a setup wizard.
  4. Restart your computer. After installation completes, reboot so the driver loads properly.
  5. Verify in Device Manager. Open Device Manager and check Network adapters. You should see your wireless adapter listed without any warning symbols.

If you cannot connect to the internet to download the driver, download it on another device and transfer it via USB flash drive.

Step-by-Step: Connecting to a Wireless Network

Once the hardware is installed and drivers are loaded, connecting to WiFi is straightforward.

  1. Open the network menu. Click the network or WiFi icon in the Windows taskbar, usually located in the bottom-right corner near the clock.
  2. Select your network. A list of available wireless networks will appear. Choose your home or office network from the list.
  3. Enter the password. Type the WiFi security key (password) and click Next or Connect.
  4. Choose network profile. Windows may ask if you want to make the network Private or Public. Choose Private for home networks so file sharing and device discovery work properly.
  5. Confirm the connection. The icon should change to show signal strength, and you should be able to open a web browser and load a page.

Troubleshooting Common WiFi Issues

Wireless networking on a desktop motherboard can sometimes be finicky. Below are common problems and how to fix them.

No WiFi Adapter Showing in Device Manager

If the wireless adapter does not appear at all, first make sure the card is physically seated in the slot. Reseat the PCIe or M.2 card if necessary. Then check the BIOS to ensure the onboard wireless device is enabled. Finally, confirm that you installed the correct driver for your Windows version.

Weak Signal or Slow Speeds

Weak signal is often caused by antenna placement. Make sure both antennas are screwed in tightly and positioned upright. If your computer sits on the floor inside a cabinet or behind a large metal object, move it to a more open location. You can also try connecting to the 5 GHz band instead of 2.4 GHz if your router supports it, as 5 GHz usually has less interference.

Dropped Connections

Intermittent disconnections can result from outdated drivers or power-saving settings. In Device Manager, open the properties for your WiFi adapter, go to the Power Management tab, and uncheck Allow the computer to turn off this device to save power. Also check for firmware updates for your wireless router.

Bluetooth Not Working

On WiFi models, Bluetooth is usually bundled with the wireless card. If Bluetooth is missing, install the combined WiFi and Bluetooth driver package from Gigabyte. Make sure Bluetooth is enabled in the BIOS and that the Bluetooth radio is not turned off by a keyboard shortcut or Windows setting.

Tips and Best Practices for Wireless Performance

Getting WiFi working is only the first step. To get the best experience on your X570 Aorus Elite build, follow these recommendations.

  • Use wired Ethernet for gaming. Even the best WiFi introduces latency and occasional packet loss. For competitive online gaming, a wired connection is still preferable.
  • Position antennas correctly. Keep antennas vertical and away from the PC case metal. If your case has a window or open mesh, angle the antennas toward your router.
  • Prefer 5 GHz for speed. The 5 GHz band offers higher throughput and less congestion than 2.4 GHz, though it has shorter range. Use 2.4 GHz only if you are far from the router.
  • Keep drivers updated. Periodically check Gigabyte’s support page or Intel’s website for newer wireless drivers, especially after major Windows updates.
  • Avoid USB 3.0 interference. USB 3.0 ports and devices can generate radio frequency interference in the 2.4 GHz band. If you use a USB WiFi adapter, plug it into a USB 2.0 port or use an extension cable to move it away from the case.
  • Consider an access point. If your router is in another room, a mesh system or wireless access point can deliver a stronger signal than relying on the motherboard’s internal card alone.

Frequently Asked Questions

Does X570 Aorus Elite have WiFi built in?

Only specific variants do. The standard X570 Aorus Elite does not include onboard WiFi, while the X570 Aorus Elite WiFi and X570 Aorus Elite AX models do.

How can I tell if my motherboard has WiFi?

Look for antenna connectors on the rear I/O panel, check the box for WiFi branding, inspect the BIOS for wireless options, or look in Windows Device Manager for a wireless network adapter.

Can I add WiFi to a non-WiFi X570 Aorus Elite?

Yes. You can install a PCIe WiFi card, an M.2 wireless module, or use a USB WiFi adapter. The motherboard has the necessary slots to support these upgrades.

What WiFi card is compatible with X570 Aorus Elite?

Common compatible cards include Intel WiFi 6 AX200 and AX210 modules. Make sure the card matches the slot type (PCIe or M.2 E-key) you intend to use.

Does X570 Aorus Elite WiFi include Bluetooth?

Yes, the WiFi variants typically include Bluetooth because the wireless module combines both WiFi and Bluetooth in a single M.2 card.

Is motherboard WiFi good enough for gaming?

It works for casual gaming and general use, but serious gamers usually prefer a wired Ethernet connection for lower latency and more stable performance.

Do I need to install drivers for onboard WiFi?

Yes. Even if the hardware is built in, Windows needs the proper driver to use it. Download the driver from Gigabyte’s support page for your exact model.

Conclusion

So, Does X570 Aorus Elite Have Wifi? The answer comes down to which version you own. The base model leaves wireless out, while the WiFi and AX variants include it out of the box. Fortunately, the X570 Aorus Elite is flexible enough that adding WiFi later is straightforward, whether you choose a PCIe card, an M.2 module, or a USB adapter.

By identifying your model, enabling the correct BIOS settings, installing the right drivers, and following the best practices outlined here, you can enjoy reliable wireless networking on your AMD X570 build. If you need maximum stability for gaming or large file transfers, remember that a wired Ethernet connection remains the gold standard—but for everyday browsing, streaming, and office work, WiFi on the X570 Aorus Elite is more than capable.